Bio-Rad PowerPac Basic 041BR Power Supply Electrophoresis

Bio-Rad Phd System laboratory analyzer for parts BIORAD PHD Without a computer For pieces

UVP Visi-Blue Transilluminator Model Type VB-26 Lab This item was removed from a university lab wher (more)e it was surplus to requirement. It is in good cosmetic condition and in good working order. Specifications; - Model: VB-26 - S/N: J11544

The Criterion cell is a midi electrophoresis cell dedicated to running one or two Criterion gels, wh (more)ich are wider and longer than traditional mini gels. With a single Criterion gel, you can run up to 26 samples in less than 1 hr or accommodate an 11 cm ReadyStrip IPG strips for 2-D applications. The Criterion cell accommodates Criterion precast or handcast gels. Features and Benefits: Compact size requires only 1 L running buffer Integrated cassette buffer chamber simplifies assembly and ensures that the system will never leak Safe, easy-to-open cassettes use a built-in wedge on the lid to open gel cassettes in a single step Locator slots built into the tank walls allow easily and quickly slide cassettes into position Ability to separate more samples in fewer runs and resolve more proteins Run 2-D gels in less than a day Applications and Uses: Polyacrylamide gel electrophoresis (PAGE or SDS-PAGE) 2-D gel electrophoresis Screen new samples Evaluate sample preparation conditions Number of gels: 1–2 Precast gels: Criterion precast gels Handcast gels: Gels prepared in Criterion empty cassettes Gel size (WxL): 133 x 87 mm Gel thickness: 1.0 mm Total buffer volume: 1 L Typical running conditions: 200 V constant Recommended power supply: PowerPac Basic or PowerPac HC Dimensions (WxLxH): 144 x 223 x 195 mm Weight: 0.86 kg

Dimensions (H x W x D): 133 x 236 x 110 mm

Hoefer PS600 Electrophoresis Power Supply Voltage 10 to 600 V in 1 V step Current 4 to 750 mA in 1 m (more)A steps Maximum Wattage 150 W Features - Constant voltage or constant current mode with automatic crossover - 5 to 600 V, 3 to 750 mA, 150 W - Four sets of 4 mm output jacks - Ideal choice for most electrophoresis techniques - Continuous runs or 999 minute timer - Automatic recovery after power failure - Open circuit detection - Short circuit protection The Hoefer PS600 Electrophoresis Power Supply is a robust midrange solution designed for a wide range of electrophoresis and blotting techniques, including large format and high throughput applications. Featuring a compact design, large handle, and user-friendly interface, the PS600 is easy to set up and operate in any lab setting. Its large, easy-to-read LED display allows for simple configuration of constant voltage or current parameters, timer settings up to 999 minutes, and effortless initiation of runs. With a power output range of 5 to 600 V and 3 to 750 mA, this unit provides a dependable 150 W of maximum power. The PS600 supports three key modes of operation: Constant Voltage Mode, where the power supply maintains the user-selected voltage by adjusting the current flow; Constant Current Mode, where the supply maintains the chosen current by modulating the voltage supplied; and Automatic Crossover, which seamlessly shifts between modes when the constant parameter cannot be sustained due to power limits. Additional features such as automatic recovery after power failure, short circuit and open circuit protection, and four sets of 4 mm output jacks add to its versatility and safety. Ideal for both continuous and timed operations, the Hoefer PS600 ensures reliable performance for various electrophoresis applications. INCLUDED: The Hoefer PS600 Electrophoresis Power Supply includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Heated laboratory ultrasonic bath LBX 3.2 Liters - 40 kHz - NEW New Equipment Model: ULTR Frequency  (more)(KHz): 40 Temperature range: adjustable between ambient temperature and 80ºC Power supply: 220-240V Material: Stainless steel Maximum capacity: 3.2 L Tank dimension: 240x135x100 mm External dimensions L x D x H: 265x165x220mm Power: 120W Timer 0-30 minutes (no continuous mode) With stainless steel basket

This item has just arrived in our stock. Please enquire for further details.

If you buy a Multifunctional Scale HY10 by July 31, 2024, you will receive each of these products al (more)ong with a FREE lifetime license for the Workflow Module. Multifunctional scales HY10 series is designed to fast and precise determination of mass in industrial conditions. The HY10 scales features a terminal PUE HY10 series in stainless steel housing and a single load cell weighing platform. The HY10 series scales is made of stainless steel OH18N9 including the weighing platform, and it is equipped with 10,1”colourful touch screen display, keyboard with numeric and function keys. The scales enables cooperation with an additional weighing platforms. Additionally, the HY10 series offers full functionality available in the terminal PUE HY10 series: programmable display and function keys, designing custom printout templates, designing text data indicated on terminal display. Multifunctional scales HY10 series is offered with a terminal connected to a weighing platform through a cable. Scales HY10 series is available in dual range version on surcharge. Dedicated Applications Smart Editor The application is intended for scales equipped with the HY10 terminal. It does not require any additional installations. Enter the terminal’s address in the browser address field and log in. The application enables: - remote databases editing - import of images from the graphic file to the scale - labels import from lb file to the scale - creating and preview of report, e.g. Workflow - dosing processes operation Smart Display The application allows to personalise the scale screen and display it on a computer. The Smart Display enables customization of the display screen in a simple and clear way. Place the individual elements on a grid visible on the screen. These elements can be further scaled to suit user needs. When operated directly on the scale, the user gets a new, refreshed look with the possibility of any configuration of the home screen. If the application is operated via a computer browser, it enables remote control of the desktop or setting larger mass indication window. The Workflow Module will improve work in your company. It enables developing a path of customized weighing process adapted to individual requirements of a particular production system, and next sending it to all weighing instruments cooperating with the E2R. The given process is started on the weighing instrument upon operator logging or after selecting a product, a formulation or an ingredient to which it is assigned. Modifications are made with use of convenient and intuitive interface.