Weiss Technik WETK 0130 Climate Cabinet

This was removed from a university lab where it was surplus to requirements. The room is currently d (more)isassembled and for collection only in Bedwas, Caerphilly UK Everything is in good cosmetic condition with minor marks. It was in good working order prior to disassembly. Double doorway entry: 2x Sliding Doors:5x doorway wall panels: Perspex panels:•14x 105 x 98cm white panels•1x 105 x 98cm clear panel•2x 118cm x 104 cm white panels• 4x 115 x 96cm thicker white panels• 7x 96 x 96cm thicker white panels Rubber Seals:The seals go around the perspex panelling. -as seen in photos. 22x large rubber seals4x smaller rubber seals 1x Monmouth Circulaire air vent:Model WCAM 2250Air Vent Dims:D47cm x W102cm x H96cm 2x Air Vent Legs:The units are in good cosmetic condition and are adjustable. 1x Monmouth Scientific ON/OFF Switch: Aluminium Frame:6mm Hex Key to be used to attach and tighten sections together •2x lengths of 317cm x5cm•4x lengths of 196cm x 5cm1x length of 217cm x 5cm5x lengths of 230cm x 3cm

Memmert HCP150 Humidity Chamber 156L, 115V Temperature Range Ambient +7°C to 90°C Humidity Control  (more)20 to 95% RH, or no RH Chamber Volume 156L (5.5 cu. ft.) Features - Ideal for climate and temperature testing, including accelerated life and 85/85 tests - Unsurpassed temperature and humidity uniformity across the chamber interior - Easy-to-use ControlCOCKPIT interface and AtmoCONTROL software for intuitive programming - Durable stainless steel construction that’s scratch-resistant and easy to clean - Six-sided heating, including heated inner glass door, to prevent condensation - Aluminum thermal layer for optimal temperature distribution and energy retention - Battery-buffered ControlCOCKPIT and optional MobileALERT for enhanced monitoring - Wide range of customizable test parameters for environmental simulation - Rear-panel feed-through and process runtime delay for precise test control - Comprehensive alarm functions and three-fold overtemperature protection for sample safety The Memmert HCP150 Humidity Chamber 156L, 115V is engineered to deliver precise climate and temperature control, making it ideal for a wide range of environmental and accelerated life tests, including the rigorous 85/85 tests. Offering a temperature range from Ambient +7°C to 90°C and active humidity control from 20% to 95% RH, this chamber creates a stable and highly customizable testing environment with an exceptional homogeneity of temperature and humidity throughout. Designed with Memmert’s user-friendly ControlCOCKPIT interface and the advanced AtmoCONTROL software, it features intuitive “Touch, turn & go” operation, allowing for straightforward programming of complex test parameters. Constructed with robust stainless steel that is scratch-resistant and hygienic, the HCP150 is built to withstand extensive use while maintaining a sleek, easy-to-clean design. Its advanced heating concept includes heating elements on all six sides and a heated inner glass door to prevent condensation and ensure uniform conditions. An integrated aluminum thermal conductive layer aids in maintaining optimal temperature distribution, while also providing a heat reservoir in case of power fluctuations. The chamber’s efficient humidity control prevents condensation buildup, protecting sensitive samples and reducing maintenance requirements. To support continuous and demanding tests, the HCP150 includes various convenience features like a rear-panel feed-through, battery-buffered ControlCOCKPIT for enhanced security, and optional MobileALERT for remote monitoring of alarm conditions via email or SMS. Additional safety features include three-fold overtemperature protection and real-time display of all essential parameters. With comprehensive programming options, reliable alarm functions, and precise environmental simulation, the Memmert HCP150 ensures both safety and accuracy, providing an optimal solution for laboratories focused on climate and temperature testing. INCLUDED: The Memmert HCP150 Humidity Chamber 156L, 115V includes: - 2 x Stainless Steel Perforated Shelves - Water Tank - 2 x Sponge Plugs for Silicone Entry Ports - USB Drive w/ Software & AtmoCONTROL Manual - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Memmert HPP110eco Climate Chamber 108L, 115V Setting Temperature Range (without light, with humidity (more)) +5 to +70°C Setting Range Humidity 10 to 90 % rh Chamber Volume 108L (3.8 cu. ft.) Features - Temperature range from +5 to +70 °C with humidity or light, and from 0 to +70 °C without - Volume capacity of 108L for versatile storage and incubation needs - Equipped with an inner glass door and fully insulated stainless steel outer door - Precision temperature control with setting accuracy of 0.1 °C and dual Pt100 sensors for reliability - Humidity settings from 10% to 90% RH, managed by a hot steam generator and Peltier technology for dehumidification - Features TwinDISPLAY with adaptive digital PID-microprocessor for intuitive control and display - Programmable with AtmoCONTROL software via USB or Ethernet for advanced data management - Enhanced safety with AutoSAFETY over/under-temperature protection, ASF system, and visual/acoustic alarms The Memmert HPP110eco Climate Chamber 108L, 115V offers advanced environmental control with a versatile temperature range from +5 to +70 °C with humidity or lighting, and 0 to +70 °C without. Its 108L capacity provides ample space for diverse incubation and storage needs. The chamber is equipped with a fully insulated stainless steel door, complemented by an inner glass door for easy visibility without compromising stability. Temperature control is highly precise, with a 0.1 °C setting accuracy achieved through dual Pt100 sensors, ensuring consistent reliability across all applications. Humidity control ranges from 10% to 90% RH, facilitated by a hot steam generator and Peltier-based dehumidification for optimal performance in fluctuating conditions. Engineered for usability and control, the HPP110eco features the intuitive TwinDISPLAY system, driven by an adaptive digital PID-microprocessor controller with two high-definition TFT displays. Advanced programming options are accessible through AtmoCONTROL software via USB or Ethernet, allowing seamless data management and transfer. Enhanced safety features include the AutoSAFETY system, providing over/under-temperature protection, an ASF (AutoSAFETY Function) alarm system, and integrated visual and acoustic alerts to ensure safe, continuous operation. This chamber is ideal for controlled, precise climate conditions in laboratory and industrial applications. INCLUDED: The Memmert HPP110eco Climate Chamber 108L, 115V includes: - 2 Stainless Steel Grid - Tilt Protection Wall Bracket - USB Drive w/ Software & AtmoCONTROL Manual - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

REFRIGERATED LABORATORY INCUBATORS ST SMART POL-EKO ST - STABILITY AND QUALITY AT THE BEST PRICE Bei (more)ng able to both heat and cool, ST incubators are perfect for the stable and safe incubation of samples, in any working environment. The ST series maintains a constant temperature from 3°C to 40°C with excellent precision. As an option, the range can be extended up to +70 °C. Operation at ambient temperature +10°C...+28°C, for cooled incubators with glass door +10°C...+25°C. It's necessary to purchase automatic defrosting function (ST/CHL PLUS) for all units operating at set point <=5°C to prevent icing. Large touch display, LED lighting, alarms, lock, simple and comfortable design, will make using these incubators a breeze; and thanks to the programming with time and temperature profiles, you will be able to carry out highly precise and repeatable incubations. But it doesn't end here, continue reading and discover all the other surprising features of these incubators! WHICH VERSION? THE THREE VERSIONS OF THE ST MODEL The three models differ in the materials of the internal chamber, the materials of the shelves and the safety class. This subdivision allows you to choose based on your real needs, meeting your budget. BASIC: aluminum interior; metal grid shelves; safety class 1.0 (DIN 12880). COMFORT: stainless steel interior according to DIN 1.4016; stainless steel grill shelves; safety class 1.0. PREMIUM: Interior in acid-resistant stainless steel according to DIN 1.4301; stainless steel grill shelves; safety class 2.0. As an option, at the bottom of the page, you can find the ST-INOX accessory; this allows you to order your ST refrigerated incubator with polished stainless steel exteriors, rather than powder-coated sheet metal (light gray with graphite front panel) as standard. ABSOLUTE CONTROL CONTROL PANELS The SMART control panel is among the most complete you can find on the market. Large symbols and temperature values ​​guarantee comfortable and clear reading, combined with disarming ease of use. The latest generation touch screen responds to commands even if touched with latex gloves and is equipped with a large display: all values ​​are perfectly readable from any angle, regardless of the intensity of the light. More and more? POL-EKO has already thought about it. For those who want cutting-edge functions and the freedom of transfer and remote use, POL-EKO offers you the SMART PRO controller. You can find all the differences between the SMART and SMART PRO panel in our dedicated post: insights on SMART and SMART PRO. With the SMART PRO versions, more accessories and options will also be available. DO YOU KNOW THE ADVANTAGES OF AN ADVANCED CONTROLLER LIKE THE SMART PANEL? - Sharp 4.3' color touch screen - Quick and easy data transfer: via LAN or USB - Fast, multi-segment, time and temperature programming - Visual and audible alarms with colored bar on display - Internal memory for programs and data storage - User manual downloadable directly from the controller - Loop function up to 255 times or infinite - Controls can be managed even when wearing latex gloves - Recording of the minimum, average and maximum temperature value for each segment - Overview of the set and current parameters during operation - Operation in temperature or time priority mode - ... and much more More and more? POL-EKO has already thought about it. For those who want cutting-edge functions and the freedom of transfer and remote use, POL-EKO offers you the SMART PRO controller. You can find all the differences between the SMART and SMART PRO panel in our dedicated post: insights on SMART and SMART PRO. With the SMART PRO versions, more accessories and options will also be available. QUALITY FIRST Resistant. Durable. POL-EKO incubators are designed and built to guarantee the best performance. They are a smart purchase, for customers who want to invest in the future of their laboratory. By choosing these products you will have precise results for years and years, repeatable and in complete comfort. The ST SMART series incubators are built with the best materials and equipped with the most important accessories, to give you a complete and ready-to-use standard product. - Insulated door with lock - Internal LED light - Optional internal and/or external glass door - USB port for downloading recording data, events, manuals, service. - LAN port - Open door alarm - Access port for external sensor on the side - Quality control protocol (in +37°C) - Available with FOT: phytoperiodic system – day and night simulation. To find out more, download our informative PDF: The photoperiodic (FOT) and phytotron (FIT) systems by POL-EKO. The three versions of the ST models The three models differ in the materials of the internal chamber, the materials of the shelves and the safety class. This subdivision allows you to choose based on your real needs, meeting your budget. BASIC: aluminum interior; wire shelves; over temperature protection class 1.0. COMFORT: stainless steel interior according to DIN 1.4016; stainless steel wire shelves; over temperature protection class 1.0. PREMIUM: Interior in acid-resistant stainless steel according to DIN 1.4301; stainless steel wire shelves; over temperature protection class 2.0. As an option, at the bottom of the page, you can find the ST-INOX accessory; this allows you to order your ST refrigerated incubator with polished stainless steel exteriors, rather than powder-coated sheet metal (light gray with graphite front panel) as standard. ST SMART SERIES POL-EKO offers 10 models of refrigerated incubators with capacities from 70 to 1540 litres. The ST series also offers multi-chamber models with two or three separate and independently controlled internal compartments. These solutions allow you to save space in the laboratory and perform tests at different temperatures. Mixed multichambers are also available, such as incubator-refrigerator or incubator-freezer combinations. DETAILS AND ACCESSORIES Every detail of your POL-EKO models is designed to make routine work as simple and comfortable as possible. Below, the front and rear view. 1 - rating plate 2 - Temperature sensor 3 - Shelf 4 - Access port for external sensor 5 - Adjustable feet 6 - Solid external door 7 - Ventilation 8 - Lock 9 - Touch screen control panel 10 - USB port 11 - Door open sensor 1 - Main switch 2 - Condenser 3 - Cooling system 4 - Fuse 5 - Main power socket 6 - LAN port For larger models: a - Anchor rods b - Integrated power cable c - Fuse d - Main switch e - LAN port OPTIONS POL-EKO allows you to increase the possibilities of your incubator with quality accessories; to better adapt to particular applications or to equip the instrument with safety systems and advanced connections. In the photo, the beautiful glass doors supplied with the ST models. - Internal glass door - External glass door - Grid shelf - Stainless steel grill shelf - Perforated shelf - Reinforced shelf - Stainless steel basins - Aluminum or stainless steel drawer with guides - Wheels - Coffee table with wheels - Automatic defrost function - Heating up to 70°C - Photoperiodic system - POT - Internal socket - LabDesk software - IQ OQ PQ calibration and qualification - Overtemperature protection class 3.3 according to DIN 12880 - Backup battery for the display in case of power failure - Dry alarm contact - LAN cable - Non-standard 20/60/100 mm access door - Additional 30 mm access door

Equipped with a rotating barrel with external gas connection. Temperature range: 15°C – 45°C Humidit (more)y range: 0 – 98% rH Diameter barrel: 375 mm Dimensions (HxWxD): 2135 x 1380 x 1080 mm Internal dimensions (HxWxD): 790 x 800 x 725 mm

Memmert ICP 400 cooled Incubator. Temperature range from 0ºC up to +60ºC. Model Size 53 L. Stainless (more) steel. Closed air jacket heating on all sides. Motorised ventilation in the working chamber adjustable in 10% steps (20%-100%) through controller. Highly efficient automatic defrosting system. Microprocessor 3 point controller. Multi-functional programming (menu on 5-digit-LED digital display) of a nearly unlimited number of ramps. Serial interface RS232 incl. The Memmert ICP 400 cooled incubator is a high-quality piece of equipment designed to offer precise temperature control in laboratory applications. With its integrated cooling system, this oven allows you to maintain a constant and uniform temperature inside, making it ideal for storing and cooling sensitive samples. In addition, it has a large capacity of 400 liters and an intuitive interface that makes it easy to use and program. With the Memmert ICP 400 cooled incubator, you can guarantee the integrity and stability of your samples at all times.

This Leybold Sogevac SV200 Single-Stage Rotary Vane Vacuum Pump was removed from a university lab wh (more)ere it was surplus to requirements. The unit is in good cosmetic condition but has some stains. The unit has been professionally serviced with new oil and mist filters fitted. It was tested at 1.5 x 10 m/bar.

Branson Converter Stand Clamp for SFX150 &amp; SLP Sonifiers The Branson Converter Clamp (101-063-1 (more)109), is designed to be used with the Branson Support Stand and Rod when using the SFX150 and SLP sonifiers. This product ensures easy adjustments of horn positioning in relation to the sample. Sonifier CompatibilitySFX 250, SFX 450, and SFX 550 SonifiersCompatible Stand (H x Dia.)101-063-1108

Motic BA310 MET-H Trinocular Motic’s BA310MET series presents a powerful microscope line for inciden (more)t light applications in all material sciences. Industrial quality control of opaque samples can be performed as well as teaching in educational environments of engineering and material professions, where affordability and ease of use are key demands. Extended flexibility is given by the BA310MET-T models with built-in transmitted light for transparent or compound materials. The BA310MET-H includes a more flexible focusing device, dedicated to larger samples with little limitation in size. Motic's LM Plan-Achromatic objectives with Long-Working Distance for incident light provide optimal image contrast for reflective, non-covered specimen. Together with a fully corrected tube lens an intermediate image without colored fringes is created. In all models the Epi-Illuminator offers a powerful 50W Halogen light source. The built-in field diaphragm and aperture diaphragm help to optimize image quality by reducing stray light and thus increasing contrast.INCLUDED: The Motic BA310 MET-H Trinocular includes: - 5X/0.13 (WD 11.5mm) Objective - 10X/0.3 (WD 6.8mm) Objective - 20X/0.40 (WD 11.1mm) Objective - 50X/0.55 (WD 8.2mm) Objective - Widefield N-WF10X/22mm with Diopter Adjustment - Dust Cover - Power Cord - Allen Key - Operator's Guide Motic BA310 MET-H Trinocular SpecificationsOptical systemColour Corrected Infinity Optical System (CCIS®)Observation tubeTrinocular head, Siedentopf typeInclination30° inclinedTrinocular light split100:0/20:80Interpupillary distance55-75mmDiopter adjustmentOn both eyepieces, +/- 5 diopterEyepiecesWidefield N-WF10X/20mm with diopter adjustmentIntermediate bodyEpi-illuminator quartz halogen with integrated field and aperture diaphragms and external lamphouseNosepieceReversed quintupleObjective classificationCCIS® LM Plan Achromatic, DINObjectives5X/0.13 (WD 11.5mm), 10X/0.3 (WD 6.8mm), 20X/0.40 (WD 11.1mm), 50X/0.55 (WD 8.2mm)Objective mounting threadW 4/5"x1/36" (RMS standard)Stand typeUpright with pole stand with focusing block and baseStageMechanical stage, hard coated with coaxial stage controlStage size180x140mmTravel range X&amp;Y100x80mmFocus mechanismCoaxial coarse and fine focusing system with tension adjustmentFine focus precision2μmFocusing stroke30mmIncident illuminationQuartz halogen 12V/50W with integrated field and aperture diaphragmsIllumination interchangeabilityQuartz halogen 12V/50W or LED 3WIllumination featuresExternal lamp house for Epi-illuminatorTransformerExternalPower supply100-240V (CE)Dimensions LxWxH369x485x391mmBase300x300mmNet weight15.7kgComparison of ModelsSpecificationMotic BA310 MET BinocularMotic BA310 MET TrinocularMotic BA310 MET-H TrinocularMotic BA310 MET-H Trinocular (Erect Image)Motic BA310 MET-T Trinocular (3"x2" Stage)Motic BA310 MET-T Trinocular (6"x4" Stage)Motic BA310 MET-T Trinocular (Erect Image)Motic BA310 MET-T Trinocular (Stroke 3”x 2” Stage) (Erect Image)Observation TubeBinocular headTrinocular headTrinocular headTrinocular head (Erect Image)Trinocular head, Siedentopf type, 360° SwivelingTrinocular head, Siedentopf type, 360° SwivelingTrinocular head, Siedentopf type, 360° SwivelingTrinocular head, Siedentopf type, 360° SwivelingInterpupillary Distance48-75mm48-75mm55-75mm55-75mm48-75mm48-75mm48-75mm48-75mmObjective ClassificationCCIS® EC Plan Achromatic, DINCCIS® EC Plan Achromatic, DINCCIS® LM Plan Achromatic, DINCCIS® LM Plan Achromatic, DINCCIS® LM Plan Achromatic, DINCCIS® LM Plan Achromatic, DINCCIS® EC Plan Achromatic, DINCCIS® LM Plan Achromatic, DINObjectives5X/0.13 (WD 20.3mm), 10X/0.25 (WD 17.5mm), 20X/0.40 (WD 8.1mm), 50X/0.55 (WD 8.4mm)5X/0.13 (WD 20.3mm), 10X/0.25 (WD 17.5mm), 20X/0.40 (WD 8.1mm), 50X/0.55 (WD 8.4mm)5X/0.13 (WD 11.5mm), 10X/0.3 (WD 6.8mm), 20X/0.40 (WD 11.1mm), 50X/0.55 (WD 8.2mm)5X/0.13 (WD 20.3mm), 10X/0.25 (WD 17.5mm), 20X/0.40 (WD 8.1mm), 50X/0.55 (WD 8.4mm)5X/0.13 (WD 20.3mm), 10X/0.25 (WD 17.5mm), 20X/0.40 (WD 8.1mm), 50X/0.55 (WD 8.4mm)5X/0.13 (WD 20.3mm), 10X/0.25 (WD 17.5mm), 20X/0.40 (WD 8.1mm), 50X/0.55 (WD 8.4mm)5X/0.13 (WD 20.3mm), 10X/0.25 (WD 17.5mm), 20X/0.40 (WD 8.1mm), 50X/0.55 (WD 8.4mm)5X/0.13 (WD 20.3mm), 10X/0.25 (WD 17.5mm), 20X/0.40 (WD 8.1mm), 50X/0.55 (WD 8.4mm)StageMechanical stage, hard coated with coaxial stage controlMechanical stage, hard coated with coaxial stage controlMechanical stage, hard coated with coaxial stage controlMechanical stage, hard coated with coaxial stage controlMechanical stage, hard coated with built-in low position coaxial stage control and glass plateMechanical stage, hard coated with built-in low position coaxial stage control and glass plateMechanical stage, hard coated with built-in low position coaxial stage controlMechanical stage, hard coated with built-in low position coaxial stage control and glass plateStage Size180x140mm180x140mm180x140mm180x140mm240x140mm300x180mm180x140mm240x140mmTravel Range X&amp;Y75x50mm75x50mm100x80mm100x80mm75x50mm150x100mm75x50mm75x50mmIllumination InterchangeabilityQuartz halogen 12V/50W or LED 3WQuartz halogen 12V/50W or LED 3WQuartz halogen 12V/50W or LED 3WQuartz halogen 12V/50W or LED 3WEpi-illuminator Quartz halogen 12V/50W or LED 3W, transmitted Quartz halogen 6V/30W or LED 3WEpi-illuminator Quartz halogen 12V/50W or LED 3W, transmitted Quartz halogen 6V/30W or LED 3WQuartz halogen 12V/50W or LED 3WEpi-illuminator Quartz halogen 12V/50W or LED 3W, transmitted Quartz halogen 6V/30W or LED 3W.comparison-table tr td:nth-child(4) { background-color: #fffacd; }DownloadsTechnical Specification Download Operator's Manual Download

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Scales indispensable in doctors&rsquo; offices, clinics and hospitals The baby scale is a precise el (more)ectronic weighing equipment manufactured in class III and intended to weighing infants. It is available as dual-range instrument. Baby scales are used in health care facilities such as doctors&rsquo; offices, clinics and hospitals. A matter of great weight Controlling an infant&rsquo;s weight is very important, and failure to do so can have a negative impact on the child&rsquo;s future life. Both too fast and too slow infant weight gain carry the risk of many diseases and health problems, including &ndash; on the one hand &ndash; childhood obesity, and on the other &ndash; motor or psychological disorders. Modern baby scales are much more accurate than they used to be &ndash; the readability of the best baby scales manufactured by RADWAG is 2 g. In addition, since a small child rarely lies still, the scale on which it is weighed should have electronic solutions and filters that allow precise measurement. Childishly simple weighing Weighing on a baby scale manufactured by RADWAG is child&rsquo;s play. Why? First of all, today&rsquo;s baby scales are light and mobile, allowing them to be carried anywhere. Other conveniences in them include: the ability to run on battery power for up to 8 hours, transfer data directly to a computer and tare, for example, when weighing with a diaper or sanitary pad. What&rsquo;s more, the backlit display makes it readable from many angles. Also, the weighing pan, on which the infant is weighed, is properly contoured and tilted at the right angle for ergonomic and safe weight measurement. It has been with us for years, and will stay for a long time to come The baby scale is equipped with a SYNTHOS PS HI 945E polystyrene weighing pan as well as PUE C315 terminal comprising a backlit LCD display and a 5-button keyboard for simple operation of basic scale functions. The LCD display has accompanied us for long years. During this time it has proven its reliability. It guarantees the readability of the result from many angles and is energy efficient. Internal power No access to mains power? Power failure? No problem. Thanks to its internal rechargeable battery, the baby scale allows up to 8 hours of operation without mains power! Use the potential Receipt printers, power adapters, displays &ndash; thanks to multipurpose software, the baby scale can work with all of them. As standard, it is equipped with an RS232 cable to which you can connect most of the accessories from our range. Do you need ALIBI? There you have it. ALIBI memory is like a black box of a scale. It records all measurements taken on the device. The ALIBI memory cannot be modified or erased.