AIRFLOW LCA6000VT Precision Anemometer / AIR-Velocity Meter 0.25-30 m/s +/-1%

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Sherwood M851 Air Compressor This item was removed from a university lab where it was surplus to req (more)uirements. The item is in good cosmetic condition, powers on, and is fully functional.

AARIAC Clean Air CLR 20/30 S T UK Compressor Lab This item was removed from a university where it wa (more)s surplus to requirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility. The unit had been newly installed in late 2023, so has not seen heavy use. Also included is the following: Nardi Compressor - Dryer 400Installed/Replaced - 23/11/23

Woods 63KO Variable Pitch Aeronautical Engineering Wind Testing Tunnel This was removed from a univ (more)ersity engineering department where it was surplus to requirements. The tunnel was dismantled when we collected so no testing was carried out, but we were told that it was still in operational condition prior to dismantling. It is in five sections: Section 1- Main Power/ Fan Unit.-405 kg. 120 cm x 120 cm x 150 cm. Outlet flanges 63 cm inside diameter. 3 phase 5 pin 415V motor. Section 2- Silencer Unit- 160 kg. 127 cm x 91 cm x 131 cm. Flanges are 79 cm and 63 cm inside diameters. Section 3- Air Intake Funnel- 155 kg. 170 cm x 121 cm x 145 cm .Apertures are 41cm x 41 cm and 80 cm x 80 cm. Section 4- Large Tunnel Section-155 kg. 118 cm x 73 cm x 120 cm. Apertures are 41 cm x 41 cm and 64 cm diameter internal. Section 5- Work Access Unit-85 kg. 55 cm x 55 cm x 160 cm. This has 8 openings 30 cm x 60 cm. It comes with a variety of doors, 8 in total.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

6 block dry heaters Designed for daily use in the laboratory, dry block heaters are ideal for applic (more)ations that require particular temperature stability. All units house six easily interchangeable modular blocks, with 40 options to choose from. Close contact between tube and block ensures maximum heat retention for efficient heating. Analog models: economic alternative; low temperature range: +5°C above ambient temperature to 100°C; high temperature range: 75°C to 150°C; control via two temperature adjustment knobs. Digital models: for repeatable results; from 5°C above ambient temperature to 120°C; control via touch pad controls with independent and easy to read LED displays for temperature and time display; sound alarm. - Exceptional temperature uniformity and extraordinary thermal stability. - Unique single point calibration function to ensure accurate display of actual temperature (digital models) Applications Culture incubation and activation, enzymatic reactions, immunoassays, melting / boiling points, isothermal incubation, nucleic acid denaturation Display LED display in digital models and knob with double adjustment and markings in analog models Operation Detachable three-wire cable and plug (included). Analog models require an external thermometer or temperature adjustment tool for the setpoint Structure Painted steel armor and support bar attachment with fixing knob Construction features Keypad control and audible alarm (digital models)

R02 Label Editor is a proprietary application of RADWAG, which allows users to make labels for indus (more)try scales, scales intended for EX area, PGC scales and checkweighers. It is used to design labels for scales operating in labelling, counting, dosing and formula making systems, and in automatic scale systems. R02 Label Editor is compatible with: advanced C32, HX7 and HX5.EX series scales, professional HY10, TMX, WLY, WPY and 5Y series scales, DWM, DWT and DWR series checkweighers. Label Editor functionality: making label templates for ZEBRA label printers that support EPL-II and ZPL-II programming languages, making label templates for CAB Hermes printers, sending graphics and fonts to printer memory, change of DPI for the designed label, change of label size and label print direction, declaring label printout quantity, support of code pages: WE – Windows 3.1 Latin 2, E1 – ISO 8859/1: Latin 1, PM – PC-850 Multilingual, PE – PC-852 Latina 2, PC – PC-8 Code Page 437, E7 – ISO 8859/7 Latin/Greek, WR – Cyryllic and WL – Windows-125, available label components: graphics, bar code, line, frame, table, nutrition facts label, static text, variable value, support of 1D bar codes: Code 3 of 9, UPC-A, UPC-E, Interleaved 2 of 5, Interleaved 2 of 5 Check Digit, Code 128 A, Code 128 B, Code 128 C, GS1-128, EAN-13 (JAN-13), EAN-8 (JAN-8), HIBC, CODEBAR (NW-7), Int 2 of 5, Plessey, UPC 2DIG ADD, UPC 5DIG ADD, Code 93, UCC/EAN128, UCC/EAN128 for K-MART and UCC/EAN128 Random Weight, support of 2D bar codes: UPS MaxiCode, PDF417 and DataMatrix, selection between 13 different graphic styles.

Motic BA310POL Polarizing Binocular Compound Microscope Magnification Range 4x to 60x Optical System (more) Colour Corrected Infinity (CCIS) Illumination Koehler Quartz 30W Halogen Features - Polarizing microscope - Binocular head - 360 degree rotatable stage - Rotatable polarizer - Rotatable analyzer - Focusable, center able Bertrand lens - 6v/30w Koehler halogen illumination - N-WF PL10x/20 eyepieces with crosshair on one eyepiece - EC Strain free objectives: 4x, 10x, 40x S, 60x S - Manufactured in accordance with European RoHS Standard to avoid contact with lead - Anti-fungus treatment applied to all parts of the microscope for humidity protection - Switching power supply for use worldwide (100-240V) The BA310POL series from Motic are powerful polarization microscopes for use with transmitted light. Designed for the examination of birefringent samples in mineralogy and petrography, the BA310POL can also used for research with synthetic materials, as well as educational and industrial applications. Illumination is provided by a 6v/30w Halogen lamp, with adjustable field and aperture diaphragms enabling users to easily create homogeneous and repeatable illumination. Together, these increase image quality by reducing stray light and increasing contrast. The field diaphragm also plays a key role in Conoscopic observation.The BA310POL contains a pre-centered stage, 160mm in diameter, with a continuous 360 degree scale in 1 degree increments. This provides sample orientation and enables semi-quantitative measurements. Furthermore, high precision ball bearings ensure smooth rotation, as well as precise positioning of the test sample. The stage also contains a chemical resistant surface, hard coated to withstand abrasion. Users will find a fully rotatable polarizer with 90 degree click stops, contained in a sub stage condenser carrier. The unit’s intermediate tube also contains several items – a Bertrand lens, compensator slot, and an analyzer. The analyzer is fully rotatable, with a scale in 1 degree increments, and fixing screw to help lock the best positions. The Bertrand lens is both focusable and centerable, and the DIN compliant compensator slot can be used with any of Motic’s optional compensators. These range from first order red and quarter wave plates, to quartz wedges. The BA310POL also includes EC Plan Achromatic objectives. Made of high quality optical glass, these objectives contain a multi layer lens coating for increased contrast and image quality. Combined with a fully corrected tube lens, the BA310POL provides an optical intermediate range without any colored fringes. INCLUDED: The Motic BA310POL Polarizing Binocular Compound Microscope includes: - Binocular head Siedentopf type 30° inclined - Widefield high eyepoint eyepiece N-WF PL10X/20mm with diopter adjustment - Intermediate Tube with Rotatable Analyzer and Bertrand Lens - Reversed quadruple nosepiece - CCIS EC Plan Strain-free Objectives: 4X, 10X, 40X(S), 60X(S) - 360° Circular Rotating Stage - Achromat Swing-out Condenser, N.A.0.9/0.13 (strain-free) - Rotatable Polarizer - Empty Insertion Plate - Blue filter, allen hexagonal key, vinyl dust cover - Koehler illumination quartz halogen 6V/30W with intensity control - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Julabo CORIO CD-300F Refrigerated Circulator, 115V/60Hz (NRTL Certified) Refrigerant R134a Working (more) Temperature Range -25°C - 150°C Cooling Capacity 310W (at 20°C) Features - Models for internal and external applications - Bright, white, easy to read display - Very quiet - Easy pump change-over (internal and external circulation) - External pump connections (M16x1) - USB connection - Space-saving cooling coil design yields more usable space in the bath tank - Bath lid and drain tap included - Removable ventilation grid - Refrigeration unit without side vents - Class III (FL) according to DIN 12876-1 CORIO™ CD refrigerated/heating circulators are suitable for temperature applications with cirulation to an external apparatus or immersing a device in the bath tank. The CORIO™ CD circulator incoporates easy change-over for control of fluid circulation internally or externally. Refrigeration combinations offer a low temperature range from -20 °C to -40 °C with an upper limit of 150 °C. Unit fittings M16x1 male threaded adapters including a pair of 8 and 12 mm hose barbs.USB connection for external PC control and data-logging. A space-saving cooling coil design yields more usable space in the bath tank. Bath lid and drain tap included.PID temperature control provides ±0.03 °C stability. Centrifugal pump capacity of 15 L/min with pressure to 5.1 psi.Stainless steel bath tank. Class III (FL) according to DIN 12876-1INCLUDED: The Julabo CORIO CD-300F Refrigerated Circulator, 115V/60Hz (NRTL Certified) includes: - 2 Each Barbed Fitting for Tubing 8 and 12 mm Inner Dia. (Pump Connections M16x1 Male) - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Heidolph Unimax 2010 Orbital Platform Shaker The Unimax 2010 is the optimal model for increased samp (more)le throughput. With a usable area of 390 x 340 mm and the possibility of a multi-story structure, space is used effectively. The orbit of 20 mm and speeds between 20 and 400 rpm guarantee gentle mixing of all samples. This shaker can be operated either continuously or with an integrated timer (max. 120 min). Click Here to View Product Video INCLUDED: The Heidolph Unimax 2010 Orbital Platform Shaker includes: - Power Cord - Operator's Guide - Manufacturer Documentation - 3 Year Manufacturer's Warranty