Single-channel electronic pipette F81044 GILSON P300M 20 to 300 µl

Digital dispenser BRAND DISPENSETTE S 1-10ML Brand reference: 4600340 volume range: 1-10ml Accuracy  (more)in % (+/-): 0.5% Accuracy in µl (+/-): 50 µl coefficient of variation in %: 0.1% coefficient of variation in µl: 10 µl Without purge valve

Manufacturer: Agilent P/N: 5061-3361 Description:Agilent Rigid Capillary Tubing10 cm x 0,17 mm Items (more) delivered:- 10 SS caps Condition:The caps are new.

Arise Biotech EzMate 601s Automated Pipetting System This was removed from a university lab where it (more) was surplus to requirements. The unit powers up and runs through calibration a self-tests without fault. There is no PC with the unit so we were unable to test it further. It is in good cosmetic condition with minor marks from use. Item does not include EzStarter Software or ACHM Control Box.

Hamilton Microlab Chemagic STAR Liquid Handling Workstation with Software This was removed from a wo (more)rking lab where it was surplus to requirements. The unit was purchased by the lab some time ago, but was only ever lightly used, if at all. It came to us in the original packaging. With it are; 1 x Perkin Elmer Chemagic STAR Extraction unitSN - 083 1 x Chemagic STAR Table PN - 806102/01SN - 7554Dimensions - L236 W78 H81cm (with frame on top it goes up to 105cm) Other parts:-2 x Chemagic 24 Rod Heads6 x RGT_CAR PN - 185436/002 x RGT_CAR PN - 185290/0113 x APE_Carrier PN - 198588/012 x TIP_CAR PN - 182085/031 x APE_Carrier PN - 188039/0010 x Tube Racks (Holds 12 x 50ml)4 x Tube Racks (Holds 12 x 12ml)6 x Tube Racks (Holds 32 x 12ml)2 x Tube Racks (Holds 12 x 1ml)2 x Tube Racks (Holds 32 x 1ml)6 x SMP_CAR PN - 185249/008 x MP_CAR PN - 185248/002 x RGT_CAR PN - 187299/0014 x Plate Holders2 x Trays holding 32 parts labelled 1853153 x CO-RE Needles2 x PN - 198935/00Various screwsPower CableRoll of waste bagsBox containing Brackets Manuals/Software:-Microlab STAR Line Programmer's ManualMicrolab STAR Line Operator's ManualChemagic STAR Installation package V2.0 Part 1Chemagic STAR Installation package V2.0 Part 2 Medium VolumeChemagic STAR Installation package V2.0 Part 2 High VolumeMicrolab STAR Venus Two Base Package 4.3Microlab STAR Venus Two Service Pack 1 Consumables:-7 x Packs Hamilton CO-RE Tips 120 5ml Tips without Filters 6 x Packs Hamilton CO-RE Tips 480 High Volume Tips (1000µL) without Filters 1 x Box of 10 x 200ml Reagent Containers1 x Box of 6 x 200ml Reagent Containers2 x Boxes of 12 x 50ml Reagent Containers1 x Box of 7 x 50ml Reagent Containers2 x Boxes of 12 x 120ml Reagent Containers1 x Box of 8 x 120ml Reagent Containers1 x Box of 250 Perkin Elmer Disposable Tips

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This Orbit Marine AL-7100-LCU Local Control Unit was removed from a university lab where it was surp (more)lus to requirements. The unit is in good cosmetic condition with marks from use. The client informed us that it is functional.

Leica DMIL Inverted Microscope Type 090-135.001 This was removed from a university lab where it was (more) surplus to requirements. The unit powers on and is in working order. The focus knob is quite stiff but the fine adjustment works as intended. It is in good cosmetic condition with minor marks. Includes: -Leica ∞/-/ C PLAN L 10x/0.22 PH 1 (506078)-Leica ∞/0-2 C PLAN L 20x/0.30 PH 1 (506152) 2 x Eyepieces:-Leica 10X/18 (527000)-Leica 10X/18 M (527001)

Yamato DG-440C Natural Convection Glassware Drying Oven with Sterilization Lamp 92L, 115V Temperatur (more)e Range Ambient +5°C to 70°C Heater Power 1.0 kW Chamber Volume 92L Features - Large window for easy observation - Can be used to store instruments after drying - Highly efficient heat insulation material for both internal and external structure - Adjustable foot for stability on uneven floors - Mobile on casters (DG800C/810C/840C/850C) - Equipped with stainless steel pipe heater and water receiving plate at the bottom - Stainless steel interior, easy to clean and highly resistant to corrosion - DG440C/450C/840C/850C installed with filter at air in-take port, exhaust fan and germicidal lamp for fast drying - Dial setting and digital display of temperature control and timer 92L glassware drying natural convection oven with large observation window for easy observation. Equipped with filter at air in-take port, exhaust fan and germicidal lamp for fast drying. Highly efficient heat insulation material for both internal and external structure. Adjustable foot for stability on uneven floors. Equipped with stainless steel pipe heater and water receiving plate at the bottom. Stainless steel interior, easy to clean and highly resistant to corrosion. Dial setting and digital display of temperature control and timer. Can be used to store instruments after drying. Operating temp ambient +5~70°C. INCLUDED: The Yamato DG-440C Natural Convection Glassware Drying Oven with Sterilization Lamp 92L, 115V includes: - 2 x Shelves w/ Brackets - Water Receiving Plate - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

The MW-04-3 mass converter is designed to be a component of construction of an industrial load cell  (more)scale. Depending on the needs, communication can be established via RS232, Profibus DP. The MW-04-3 mass converter can connect with weighing indicators or the PC. It is equipped with Inputs/Outputs enabling independent control of some industrial processes, e.g.: dosing. One MW-04-3 mass converter allows to operate up to 4 weighing platforms. Construction The converter is housed in a metal casing. Signal cables of the weighing platforms (4 pcs maximum) are fed through cable glands. RS232 is available on the M12 8P connector, Profibus DP may be fed through the PG11 cable gland. The device is equipped with an in-built power supply, this allows to power it directly from the mains. By standard the MW-04-3 mass converter supports 2 weighing platforms, optionally it can support 4. Area of use: Industrial load cell scales; Complex weighing systems supervised by computer system thanks to use of the Ethernet module; Connecting numerous weighing platforms to an industrial indicator; Dosing systems; Silo weighing; Discrete weighing (no weighing indicator) on a production line; Weighing in place with limited access, where instant readout of mass is not required, just record of weighings; Large embedded scales, where the converter is installed under the scale; Simple systems for chackweighing and result control Communication with the automation system due to an implemented MODBUS communication protocol. Indicator Software Functions: Designing formulas and dosing processes directly on the weighing indicator, Dosing and formulations (manual and automatic), Configuration of communication between formula making scales and actuators, Carrying out dosing and formulations on numerous platforms, Placing production orders for formulation (refers to PUE 5) with batches where the following is set: multiplier (quantity of formulation repetitions), source and target warehouse, user, scale. "Formulations" software makes use of the weighing indicators functionality to the maximum when it comes to their operation along with actuators, e.g. control of dosing valves. Additional advantage is the possibility to set an interrelated ingredient dosing on various platforms within one formulation process. Formulations and Dosing in the Industry: Industrial weighing indicators are designed on the basis of an innovative approach to formulation and dosing processes. Communication between the indicators and the modern MW-04 mass converters boosts the functionality of systems that realise both dosing and formulations. Communication interfaces enable placing the weighing platform and the indicator in a considerable distance one from another. Formulation process carried out using RADWAG indicators is highly popular in various areas of industry, the indicators enable either manual or automatic dispensing of many ingredients in accordance with a pre-defined formulation. Practically any product can be a formulation ingredient, either it is a loose material such as sugar, tea, grain, spices, powders etc. or liquid, this is possible thanks to appropriate automation. Compatibility with: PUE 5 Indicator; PUE 7.1 Indicator; PUE HY10 Indicator; PC.

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.