Radwag WAY 200.5Y.KO Mass Comparator

RS 232 cable: scale (15-pin connector) – computer (9-pin connector). Cable length: 2 m. Custom (more)ized cable length (extra charge): 5 m, 10 m.

IN/OUT cable (PUE C41H, PUE HY10, PUE 5.15, PUE 5.19). Lenght 2 m. Cable types: Standard P0256.2: 2  (more)m Customized P0256.5 (extra charge): 5 m Customized P0256.10 (extra charge): 10 m Compatible with: Scales operated via PUE C41H terminal Scales operated via PUE HY10 terminal Scales operated via PUE 5.15 terminal Scales operated via PUE 5.19 terminal PUE C41H terminal PUE HY10 terminal PUE 5.15 terminal PUE 5.19 terminal HRP platform MWSH weighing module MWLH weighing module

The newest line of Radwag Mass Comparators enables adjusting mass standards and weights according to (more) the OIML recommendations (R-111) from 5 kg to 20kg for E1 class and lower. Mass comparators are used both for ensuring traceability of mass measurements, and verification of weights in accordance with the principles of legal metrology. RADWAG Mass Comparators have gained recognition among Accredited Calibration Laboratories in many countries. Mass comparator APP 5Y.KO series comprises two components. One of them holds the electronic module, and the other precise mechanical measuring system. High measuring accuracy is guaranteed by semi-automatic adjustment system with external mass standard. The weighing pan made of aluminium is covered with cork layer and features centering holders for the weights. The APP 5Y.KO series features an intuitive menu supporting a user in instrument operation. Correct operation of the mass comparator requires applying a special anti-draft shield which comes standard with the instrument.

PT0443 Cable is used to connect the 5Y series balance or the PUE CY10 terminal to a computer. Its st (more)andard length is 1,8 m. Optionally, the cable is used to connect the 5Y series balance or the PUE CY10 terminal to: AS X2 and AS R series balances PS X2 i PS R series balances PM C32 series balances WLC and WTC series balances, and C315 series scales MAS and MPS series weighing modules

THB sensor THB sensor is a device measuring ambient conditions, it cooperates with: a computer (1 se (more)nsor via USB 2.0 port); direct cooperation, a weighing device (1 sensor via USB 2.0 port); direct cooperation, a THBR Box (up to 4 sensors connected to THBR Box via USB 2.0 port). The THB sensor is designed to measure parameters such as temperature, humidity, pressure, air density and vibrations level. Sensor registers level of permissible vibrations at the workstation, wherein the values of vibrations level are displayed within 0 - 100% range versus reference values in laboratory conditions. Values exceeding 100% threshold inform about potential occurrence of error greater than permissible error of mass measurement performed using weighing device. Each sensor has its own identification number that is assigned to measurements saved to the database. Ambient conditions can be monitored using: weighing instrument display website Windows OS application: THB Single or THB Multi Android application. On the basis of sent measurements, the THB Single or THB Multi software determines air temperature, humidity, pressure, density and permissible vibrations factor.

The suspended self-centring weighing pan is designed specifically for the WAY 5Y.KO manual mass comp (more)arators. Installed It is installed during the device’s production stage in place of the standard weighing pan, so it should be ordered when ordering a comparator (it is not sold as a separate product). The weighing pan has the following functions: placing several weights, which are the resultant of the reference standard, off-centre, positioning the centre of gravity of the test and reference standards always in the same place.

Ramp scale with stainless-steel load cells is intended for meat, fish, pharmaceutical, cosmetic and  (more)chemical industry. The scale is equipped with LD4N system allowing lifting the platform up, useful for maintenance purposes. The mechanism enables safe platform lifting and does not require physical exertion or additional equipment. Upon platform lowering, the scale is ready to carry out measurement. There is no need for recalibration. The scale is made of OH18N9 stainless steel and is equipped with PUE H315 indicator. On a customer request the scale can be made of steel of increased anti-corrosion resistance. The length of the cable for connecting the indicator to the platform - 3m. Ramp scale with LD4N system is equipped with only one ramp. Dual range weighing instrument for an additional charge. Since the scale is equipped with a platform lifting system, you are kindly requested to order a transport box (OSB box for the platform) for it. The transport box is necessary for the safe and efficient transport and storage of the ramp scale with the platform lifting system. Please take this item into consideration when planning and placing your order. If you have any questions, the Customer Service Department will be happy to assist you.

Scilogex DS-160/T7 Saw-tooth Generator ProbeThe Scilogex DS-160/T7 Saw-tooth Generator Probe is for  (more)use with D160 Homogenizer and has a diameter of 7mm x 130mm. The Scilogex DS-160/T7 is for tissue and can hold volumes 1-50mL.INCLUDED: The Scilogex DS-160/T7 Saw-tooth Generator Probe includes: - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Corepoint Scientific EF301WWW-0M -15C to -25C Hazardous Location Freezer Temperature Setpoint Range  (more)-15°C to -25°C Capacity 30 Cu. Ft. Defrost Method Manual Features - Meets NFPA and OSHA guidelines for Hazardous Location, Class 1, Division II, Groups C & D, ensuring a safe operating environment. - Provides 30 cubic feet of storage, ideal for handling larger quantities of sensitive materials that require secure and stable conditions. - Uses R404a refrigerant with a manual defrost system to maintain effective and efficient temperature management. - Includes four fixed shelves, providing sturdy and reliable storage options within a spacious interior. - Equipped with a recessed handle and a keyed door lock to prevent unauthorized access and ensure content security. - Features leveling legs that allow for easy adjustment and stable setup in various operational environments. The Corepoint Scientific EF301WWW-0M Hazardous Location Freezer is designed specifically to meet the stringent requirements of NFPA and OSHA guidelines for Class 1, Division II, Groups C & D hazardous locations. This freezer offers a robust 30 cu. ft. storage capacity within a solid, right-hinged door equipped with a magnetic gasket to ensure a secure seal, optimizing internal temperature control from -15°C to -25°C.Constructed from durable powder-coat steel and insulated with high-density urethane foam, the EF301WWW-0M maintains consistent temperatures crucial for storing sensitive materials safely. It features four fixed shelves for efficient organization of contents, recessed handles for a streamlined profile, and leveling legs to ensure stability on uneven surfaces. Power cord is not included - final power connections at site must be hardwired to meet local codes. INCLUDED: The Corepoint Scientific EF301WWW-0M -15C to -25C Hazardous Location Freezer includes: - 4 Fixed Shelves - Leveling Legs - Key for Door Lock - Operator's Manual - 1 Year Manufacturer's Warranty