Radwag WAY 1200.5Y.KO Mass Comparator

RS 232 cable: scale (15-pin connector) – computer (9-pin connector). Cable length: 5 m. Custom (more)ized cable length (extra charge): 2 m, 10 m.

RADWAG-manufactured AVK-1000 automatic vacuum mass comparator is intended for national metrological  (more)institutes that transfer and maintain the national reference mass standard of 1 kg. The comparator is intended for weighing mass standards and silicone spheres of 100 mm diameter. It enables comparison of up to 6 prototypes of max 1kg mass. The repeatability of the process is of 0.3 µg and readability of d = 0.1 µg. A specially designed vacuum chamber enables carrying out measurements in a vacuum of 10-6 mbar capacity or in atmosphere containing noble gases. AVK-1000 is equipped with suspended weighing pan that eliminates eccentricity errors. Standard version of the mass comparator features thermo-hygro-barometer for testing ambient conditions with great accuracy: pressure of 0.001hPa, humidity of 0.01% and temperature of 0.001 °C. The comparator is also equipped with high quality vacuum gauge. The AVK-1000 vacuum mass comparator can be equipped with the LOAD LOCK system for carrying mass standards. The system enables switching or adding artefacts without changing the atmosphere inside the main chamber. With the use of a special chamber for mass standards switching the whole process is 90% shorter. During mass standards replacement carried out without the use of the LOAD LOCK system, the air enters the main chamber of the mass comparator. After each opening of the chamber it is necessary to pump the air out in order to obtain required vacuum value. The vacuum mass comparator needs approx. 48 hours in order to obtain vacuum that ensures measurement repeatability. The LOAD LOCK is equipped with a high-efficiency pump system, the time of pumping the air out in order to enable opening of the valve of the main chamber is significantly shortened. The stabilization of the main chamber after replacing/adding the mass standard and closing the valve connecting the main chamber and the LOAD LOCK system takes 5 hours. The high-quality vacuum gauges enable monitoring and comparing the vacuum value in order to determine the moment when opening the valve again and replacing the mass standard is available. A specially designed viewfinder enables monitoring of the process. The LOAD LOCK enables switching objects of dimensions adapted to the AVK-1000 mass comparator: cylindrical mass standards of 22-95 mm diameter and silicone spheres of 40-100 mm diameter. Supplementing the AVK-1000 vacuum mass comparator with LOAD LOCK system significantly improves the comparison performance.

RADWAG-manufactured AVK-1000 automatic vacuum mass comparator is intended for national metrological  (more)institutes that transfer and maintain the national reference mass standard of 1 kg. The comparator is intended for weighing mass standards and silicone spheres of 100 mm diameter. It enables comparison of up to 6 prototypes of max 1kg mass. The repeatability of the process is of 0.3 µg and readability of d = 0.1 µg. A specially designed vacuum chamber enables carrying out measurements in a vacuum of 10-6 mbar capacity or in atmosphere containing noble gases. AVK-1000 is equipped with suspended weighing pan that eliminates eccentricity errors. Standard version of the mass comparator features thermo-hygro-barometer for testing ambient conditions with great accuracy: pressure of 0.001hPa, humidity of 0.01% and temperature of 0.001 °C. The comparator is also equipped with high quality vacuum gauge. The AVK-1000 vacuum mass comparator can be equipped with the LOAD LOCK system for carrying mass standards. The system enables switching or adding artefacts without changing the atmosphere inside the main chamber. With the use of a special chamber for mass standards switching the whole process is 90% shorter. During mass standards replacement carried out without the use of the LOAD LOCK system, the air enters the main chamber of the mass comparator. After each opening of the chamber it is necessary to pump the air out in order to obtain required vacuum value. The vacuum mass comparator needs approx. 48 hours in order to obtain vacuum that ensures measurement repeatability. The LOAD LOCK is equipped with a high-efficiency pump system, the time of pumping the air out in order to enable opening of the valve of the main chamber is significantly shortened. The stabilization of the main chamber after replacing/adding the mass standard and closing the valve connecting the main chamber and the LOAD LOCK system takes 5 hours. The high-quality vacuum gauges enable monitoring and comparing the vacuum value in order to determine the moment when opening the valve again and replacing the mass standard is available. A specially designed viewfinder enables monitoring of the process. The LOAD LOCK enables switching objects of dimensions adapted to the AVK-1000 mass comparator: cylindrical mass standards of 22-95 mm diameter and silicone spheres of 40-100 mm diameter. Supplementing the AVK-1000 vacuum mass comparator with LOAD LOCK system significantly improves the comparison performance.

Application: Automatic mass comparator AK-4/100 series is intended to automatic determination of wei (more)ghts mass deviations with operator’s activity limited to the minimum. The comparator enables determining deviations of three tested weights in a single cycle. AK-4/100 is designed to compare weights from 10 g to 100 g. The instrument is commonly applicable in mass measuring laboratories, and particularly in certification units for weights classes E and F. Design and functionality: The supervising part of the mass comparator is a digital module which cooperates with a controller of instrument’s mechanical components. The digital module and the automatic loader are located in mass comparator’s weighing chamber. The instrument is operated by means of digital display which is plugged to mass comparator’s controller. The supervising elements are not integrated with mass comparator’s mechanical parts, thus enabling separation of instrument’s weighing chamber from ambient conditions influence.

The newest line of Radwag Mass Comparators enables adjusting mass standards and weights according to (more) the OIML recommendations (R-111) from 1 mg to 5 kg for E1 class and lower. Mass comparators are used both for ensuring traceability of mass measurements, and verification of weights in accordance with the principles of legal metrology. RADWAG Mass Comparators have gained recognition among Accredited Calibration Laboratories in many countries. Mass comparator WAY 5Y.KO series similarly to other models, comprises two components. One of them holds the electronic module, and the other precise mechanical measuring system. The WAY 5Y.KO series comes standard with an aesthetic, large weighing chamber with glass anti-draft shield. All elements of the weighing chamber are manufactured from glass or metal to minimize the influence of electrostatic charges on weighing result. Mass comparator WAY 5Y.KO series features an intuitive menu supporting a user while operating the instrument.

The case has been designed for safe transportation of the 5Y.PM scales. It is equipped with two hand (more)les for convenient carrying so that the device can be transported by two people at the same time (recommended). The interior of the case has been adapted to fit all device components, with this it can be carried without the risk of damage. The case is made of 6 mm thick plywood. It features reinforced corners, aluminium trim, and hard dark foam filling. The case comes as an accessory.

Striking the ideal balance of inventive features and functional and simple weighing capabilities, th (more)e OHAUS Adventurer Series presents all the applications you need for routine weighing and measurement tasks. Equipped with a color touchscreen, GLP / GMP compliance functions, two USB ports and much more, the Adventurer is the most complete scale in its class. Applications Weighing, Piece Counting, Percent Weighing, Check Weighing, Dynamic / Animal Weighing, Totalization / Statistics, Formulation, Density Determination, Display Hold Display 4.3 '' (109 mm) touchscreen display with VGA color graphics resolution and user-controlled brightness Operation AC adapter (included) Communication RS232, USB host, USB device (included). Real time clock with GLP / GMP data output. Structure Metal base, ABS top housing, stainless steel pan, illuminated up-front level indicator, weigh below hook, security bracket, calibration lock, full housing in-use cover Construction features Selectable environmental filters, auto tare, user selectable service life calibration points, software lockout and reset menu, user selectable communication settings and print options, user configurable project and user ID, up to 9 operating languages

IKA RO 5 Multiposition Magnetic Stirrer Stirring Positions 5 Positions Speed Range 0 to 1,200 RPM  (more)Speed Control 10 RPM Steps Features - Adjustable reverse operation - Wear free magnetic coils - Error code display - Easy operation with touch keypad - Suitable for continuous operation - Speed range: 0 - 1200 rpm The IKA RO 5 Multiposition Magnetic Stirrer is designed for efficient and simultaneous stirring at five positions, each capable of handling up to 0.4 liters (H2O) with a speed range of 0 - 1200 rpm. Featuring adjustable reverse operation and wear-free magnetic coils, it ensures long-term reliability and consistent performance. The device offers easy operation with a touch keypad and includes an error code display for troubleshooting. Suitable for continuous operation, the stirrer maintains a stable speed with no deviation across individual positions. The stainless steel set-up plate measures 120 x 470 mm, providing a durable and resistant surface. With a stirring position distance of 90 mm and precise speed control in 10 RPM steps, it accommodates stirring bar lengths of 25 - 30 mm. The unit's compact dimensions of 120 x 60 x 570 mm and weight of 3.66 kg make it ideal for various laboratory settings, operating efficiently within a permissible ambient temperature of 5 - 40 °C and relative humidity up to 80%. The IKA RO 5 is built to IP 40 protection standards and operates on a voltage range of 100 - 240 V with a power input of 13 W.

Benchmark Block, 96 x 0.2ml or 1 x PCR Plate The Benchmark Block (for 96 x 0.2ml or 1 x PCR plate) f (more)or use with the MultiTherm Heating Shaker or MultiTherm Heating and Cooling Shaker INCLUDED: The Benchmark Block, 96 x 0.2ml or 1 x PCR Plate includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty