Radwag AKM-2.50.1.5Y Automatic Mass Comparators

Application: Automatic mass comparator AK-4/5000 series is intended to automatic determination of we (more)ights mass deviations with operator’s activity limited to the minimum. The comparator enables determining deviations of three tested weights in a single cycle. AK-4/5000 is designed to compare weights from 1 kg to 5 kg. The instrument is commonly applicable in mass measuring laboratories, and particularly in certification units for weights classes E and F. Design and functionality: The supervising part of the mass comparator is a digital module which cooperates with a controller of instrument’s mechanical components. The digital module and the automatic loader are located in mass comparator’s weighing chamber. The instrument is operated by means of digital display which is plugged to mass comparator’s controller. The supervising elements are not integrated with mass comparator’s mechanical parts, thus enabling separation of instrument’s weighing chamber from ambient conditions influence.

Powerbank ZR-04 is used for rechargeable power supply for balances and scale accessories. It uses fa (more)st charging technology. It allows long operating time without recharging and, thanks to the “Low Power” function, powering devices with low power consumption. The ZR-04 powerbank is made of high-quality components that ensure reliable operation. A display indicating the state of charge enhances ergonomics. Powerbank ZR-04 meets airline standards, which means that it can be carried on board an airplane as hand luggage. The device can simultaneously power the balance/ scale and charge the internal battery. The average power time of the balance/ scale is, depending on the product series, from 8 to as much as 24 hours.

PT0455 Cable is used to connect the 5Y series balance or the PUE CY10 terminal to a RADWAG RTP print (more)er. Its standard length is 1,8m.

The newest line of Radwag Mass Comparators enables adjusting mass standards and weights according to (more) the OIML recommendations (R-111) from 1 mg to 5 kg for E1 class and lower. Mass comparators are used both for ensuring traceability of mass measurements, and verification of weights in accordance with the principles of legal metrology. RADWAG Mass Comparators have gained recognition among Accredited Calibration Laboratories in many countries. Mass comparator WAY 5Y.KO series similarly to other models, comprises two components. One of them holds the electronic module, and the other precise mechanical measuring system. The WAY 5Y.KO series comes standard with an aesthetic, large weighing chamber with glass anti-draft shield. All elements of the weighing chamber are manufactured from glass or metal to minimize the influence of electrostatic charges on weighing result. Mass comparator WAY 5Y.KO series features an intuitive menu supporting a user while operating the instrument.

The suspended self-centring weighing pan is designed specifically for the WAY 5Y.KO manual mass comp (more)arators. Installed It is installed during the device’s production stage in place of the standard weighing pan, so it should be ordered when ordering a comparator (it is not sold as a separate product). The weighing pan has the following functions: placing several weights, which are the resultant of the reference standard, off-centre, positioning the centre of gravity of the test and reference standards always in the same place.

The new RMC.1000.5 robotic mass comparator guarantees the utmost repeatability within 10 g - 1 kg ra (more)nge with the readability of 1 µg. Fully Automated Process of Robotic Comparison of Mass Standards Opening of the weighing chamber in the course of measurements generates air drafts and changes environmental conditions inside the chamber, this causes a great increase in dispersion. The new line of robotic mass comparators eliminates the above problem. It has been solved due to a combination of the robotic mass comparator features with the characteristics of the automatic machines. This innovative approach has improved comparison result repeatability by 100% in relation to standard solutions applied worldwide. A Robot and an Automatic Machine in One RMC 1000.5 mass comparator combines features of robotic and automatic mass comparators. Thanks to such an innovative combination it is possible to: eliminate air drafts and ground vibrations, maintain stable environmental conditions inside the weighing chamber, prolong life cycle of the robotic system, shorten duration of mass standard comparison, reduce noise. Real-Time Measurement of Ambient Conditions The new RMC 1000.5 mass comparator has been equipped with a top-class thermo-hygro-barometer enabling real-time control of ambient conditions in four locations, among many in the weighing chamber and mass standard magazine. Thermo-hygro-barometers are highly precise devices measuring pressure with the readability of 0.001 hPa, humidity of 0.01 %, and temperature of 0.001 °C. Reliability of ambient conditions measurement carried out using the thermo-hygro-barometer is confirmed by a calibration certificate. Universal Magazine Insert Design Mass standard magazine features 36 positions. The RMC 1000.5 enables comparison of weights of all shapes compliant with OIML recommendations, using just one universal insert. Remote, real-time preview of comparison process is possible thanks to a video camera. Transport Arm With use of the automatic mass comparator, the transport arm remains inactive in the course of comparison, this eliminates air drafts and vibrations, considerably shortens comparison, and reduces noise emission. The transport arm of the RMC 1000.5 mass comparator is used only to transfer the mass standards, it is out of operation within the comparison process. Optional Equipment Additional equipment includes a video camera enabling remote preview of comparison process in real time (Internet access required), and RMCS software. The RMCS allows unrestricted monitoring of the comparison process.

Ohaus SHWV02DG Waving ShakerThe OhausSHWV02DG Digital Waving Shaker provides precise speed control a (more)nd a smooth, lowfoaming, three dimensional, "wave" motion. Ideal for use in a widerange of laboratory applications and designed to be used in a variety ofenvironmental conditions. Tray includes a non-skid rubber mat that is suitablefor holding Petri dishes.The SHWV02DGis designed for use in a range of lab applications in a variety ofenvironmental conditions. Waving Shakers offer a smooth, low-foaming, 3D wavemotion for precise speed control. All models include a non-slip mat, and mostmodels are available with a stacking tray option.Microprocessorcontrol allows for electronic tilt angle adjustment in 1° increments for tiltand 1 rpm for speed.Digitalmodels are equipped with LED displays and touchpad controls for speed, tiltangle and time. Timer displays elapsed time or when programmed to a set time,will turn off when time reaches zero.Speed rampingfeature slowly increases speed to desired setpoint to avoid splashing.Audible/visual signals activate when the system detects an obstruction or trayoverload. INCLUDED: The Ohaus SHWV02DG Waving Shaker includes: - Non-Skid Rubber Mat - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Labconco FreeZone Bulk Tray Dryer 115V,50/60Hz FreeZone Bulk Tray Dryers lyophilize moderate to larg (more)e bulksample loads or numerous small batches of vials or serum bottles. The Bulk TrayDryers have three large, 12.7” x 16.6” shelves that heat up to +60C. Optionsinclude a 6-port manifold, isolation valve, additional heated shelves andsample trays. Lyo-Works™ OS lets the user set up to 30 programs, with up to 16steps each; record, chart and store data; and receive email alerts. The traydryer connects to a FreeZone Console Freeze Dryer that provides a real timedisplay of the tray dryer’s parameters on a large capacitive touch screen. Features Chamber may accommodate two additional shelves (sold separately). 200-watt heater on each shelf for heating to +60C (+140F). A microprocessor maintains system temperature within 3C of set point. (Shelves are not cooled by the Bulk Tray Dryer. Samples must be pre-frozen.) Three sensor probes for monitoring sample temperature. Connections for two additional sensors are provided (additional sensors sold separately). System programming that is displayed on the FreeZone 6, 12 or 18 Liter Freeze Dryer (freeze dryer sold separately): Manual or Program mode; probe temperatures in C or F, vacuum in mBar, Pa or Torr; segment of the program that is in progress; time remaining in present segment; alarms for power failure; shelf temperature variation >±3C; failure to reach shelf set point temperature ±3C; and program completed. Data logging and storage, when enabled, that stores and displays data in table or chart on the FreeZone 6, 12 or 18 Liter Freeze Dryer (freeze dryer sold separately). Data logging may be exported via USB or Ethernet from the FreeZone Freeze Dryer. Vacuum release valve with knob for venting the chamber so the chamber door may be opened. Side-mounted power switch. Integral support stand with attachment port for connection to FreeZone 6, 12 or 18 Liter Console Freeze INCLUDED: The Labconco 780601000 FreeZone Bulk Tray Dryer 115V,50/60Hz includes: - Communication Cable - Hardware (Screws x 4, Nuts x 4, Washers x 8) - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

IKA Eurostar 60 Control Overhead Stirrer Speed Range 0/30 to 2000 RPM Viscosity Max. 50,000 mPas S (more)tirring Quantity Max. 40 l Features - Multilingual TFT display - Programmable functions - Integrated temperature measurement - Interval operation - Timer function - Adjustable safety circuit - Locked function - Infinitely adjustable speed - Push-through agitator shafts - Overload protection - Short-term overload operation - Slim casing - Quiet operation - Error code display - H 67.60 temperature sensor and WH 11 WiCo holder included indelivery Universal laboratory stirrer designed with a removable wirelesscontroller and a digital TFT display. It automatically adjusts the speedthrough microprocessor controlled technology within the speed range of 0/30 -2000 rpm. The stirrer comes equipped with a RS 232 and a USB interface tocontrol and document all parameters. An integrated torque trend display isprovided for the measurement of viscosity changes. Safety circuits installedensures automatic cut-off in an anti-stall or overload conditions. Continuouscomparison of shaft speed to desired speed is maintained and variations areadjusted automatically. This guarantees a constant speed even with changes inviscosities of the sample.

Edwards ELD500 - 100-120V 60Hz US Helium Leak Detector Max. Measurement <5x10-12 mbar ls-1 Inlet  (more)Connection NW25 Helium Pumping Speed 3.1 ls-1 Features - Color touch screen control with local graphical display and audible leak detection - Wireless models allow simultaneous control of up to 10 leak detectors - Low weight and integrated carry handles which allow it to be bench top or trolley mounted - Allows effective pump down of large of contaminate flows compatible with ELD500 and FLEX variants - Standard sniffer line enables operation up to 4m from the ELD500. Longer sniffer lines of up to 50m can be used with the sniffer extender interface - Ensured by class leading 180° mass spectrometer The ELD500 precision leak detector is designed for fast, accurate leak detection in a wide range of applications, fully mobile and with an easy to control interface. Featuring with low energy consumption, extended warranty and even longer life ion source, Edwards ELD500 leak detector ensures exceptional low cost of ownership with no compromise on performance.Available in three variants: ELD500, ELD500 FLEX, and ELD500 DRY, Edwards ELD500 leak detector is versatile. All models feature a rugged turbomolecular pump optimised for the rigours of portable leak detection, ideal across all applications.The ELD500 WET version uses a small rotary vane backing pump. This is the preferred choice when the unit is operated in an industrial environment and when fast pump down times of large chambers are required.INCLUDED: The Edwards ELD500 - 100-120V 60Hz US Helium Leak Detector includes: - Power Cord - One Year Manufacturer's Warranty