Pharmacia Biotech GE IPGphor Isoelectric Focusing System 80-6414-02

This job lot of items comes from a variety of university laboratories. The items were no longer requ (more)ired, collected from various store rooms and facilities. None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should operate well. None of these items have been PAT or electrical safety tested. For this reason, we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks. They are sold as a spares/repairs bundle intended to be purchased by someone who has time to test and where necessary refurbish the units. It is an excellent opportunity for anyone looking to benefit from individual equipment resale. The units have not been tested at all. ITEM-36591 Hybaid Maxi 14 Rotisserie Hybridisation Oven ITEM-36595 Hybaid Shake 'n' Stack Hybridisation Oven [condition: Used]ITEM-36596 Fisherbrand HU10 Mini-Plus Horizontal Gel Electrophoresis Unit [condition: Used]ITEM-36597 Hoefer Electrophoresis Unit [condition: Used]ITEM-36598 Hoefer Electrophoresis Unit [condition: Used]ITEM-36599 Luckham 4RT Rocking Table [condition: Used]ITEM-36607 UVP Transilluminator [condition: Used]ITEM-36608 Compaq TFT7010 Monitor [condition: Used]ITEM-36609 Thermo Hybaid PCR Express With Spare PCR Block [condition: Used]ITEM-39835 Hanna Instruments Water Test ITEM-39836 Jenway 9200 DO2 Meter ITEM-39766 Extech 407510 Heavy Duty Dissolved Oxygen Meter ITEM-39767 Job lot of Hanna Instruments Pocket PH Meters ITEM-38983 FluidX Xcap Microplate capper [condition: Used]ITEM-23169 Small desk fan SFE/1 [condition: Used]ITEM-39770 Hybaid PCR Express ITEM-39771 MJ Research PTC-225 Thermal Cycler ITEM-39772 Grant W6 Sonic Bath ITEM-37438 CBS Scientific EPS-300 X Power supply [condition: Used]ITEM-37439 SS 3H Hotplate Stirrer [condition: Used]ITEM-39774 Spectra Physics SP8480XR Scanning Detector ITEM-39775 Tyco Electronics LVC2KW Power Supply ITEM-39776 GS Laboratories 6593-10 CO2 Control Backup System Lab ITEM-39777 Spectra System AS3000 ITEM-39778 Test Tubes w/ Holding Rack ITEM-39779 Perkin Elmer L226-0103 Model LC-240ITEM-39101 Vevor Rolling Mill [condition: Used]ITEM-37443 Jenway 1000 Hotplate Stirrer [condition: Used]ITEM-39782 Pyrex 20L FlaskITEM-39783 Zippette Flask and Dispenser

Hoefer SE260 Mighty Small II Deluxe Mini Vertical Protein Electrophoresis Basic Unit Compatible Gla (more)ss Plate Sizes (W x H) 10 x 10.5 cm or 10 x 8 cm Maximum Power Settings 500 V, 500 mA, 12 W Compatible Spacers 0.75 mm, 1.0 mm, 1.5 mm Features - Maximum glass plate size 10 x 10.5 cm - Flexible design, additionally able to accommodate 10 x 8 cm format with optional accessories - Supports a wide variety of precast gels - Efficient active cooling ensures sharp bands - Run up to two gels (maximum 30 samples) at one time under identical conditions - Quick and easy to assemble - Choose from a wide variety of accessories The Hoefer SE260 Mighty Small II Deluxe Mini Vertical Protein Electrophoresis Unit combines the advantages of a compact design with effective cooling, offering a reliable solution for precise protein and nucleic acid analysis. Optimized for high-quality electrophoretic screening, this unit accommodates glass plates up to 10 x 10.5 cm and can also fit 10 x 8 cm formats using optional accessories, providing versatility for various lab applications. With its efficient active cooling system, the SE260 ensures sharp, well-defined bands across samples, making it ideal for labs that prioritize consistency and accuracy. This electrophoresis unit can run up to two gels at once, processing up to 30 samples under identical conditions, which is particularly useful for comparative studies and high-throughput workflows. The SE260’s flexible compatibility with a wide range of precast gels, along with its straightforward assembly process, makes it easy to incorporate into different lab settings. Operating smoothly within standard lab conditions, it can handle temperatures up to 45°C and humidity levels up to 80%, ensuring robust performance in various environments. With power settings of up to 500 V and 500 mA, the SE260 is designed to support a range of experimental protocols. Please note, the dropdown menu allows selection of a complete package based on preferred spacer accessory (0.75 mm, 1.0 mm, or 1.5 mm), which includes the following products: - Lower Buffer Chamber - Upper Buffer Chamber/Cooling Core - Safety Lid with High Voltage Leads - Casting Cradle w/Sealing Gasket Set - Casting Clamp Assemblies, 2 pcs - Cams, 4 pcs - Glass Plates, Rectangular, 10 x 10.5 cm, 10 pcs - Alumina Plates, Notched, 10 x 10.5 cm, 5 pcs - Spring Clamps, 4 pcs - Combs, 10 well, 2 pcs - T-Spacers, 4 pcs - Well Locating Decals, 2 pcs - Gel Seal INCLUDED: The Hoefer SE260 Mighty Small II Deluxe Mini Vertical Protein Electrophoresis Basic Unit includes: - Lower Buffer Chamber - Upper Buffer Chamber/Cooling Core - Safety Lid with High Voltage Leads - Cams, 4 pcs - Spring Clamps, 4 pcs - Well Locating Decals, 2 pcs - Gel Seal - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Hoefer SE400 Air-Cooled Vertical Protein Electrophoresis Basic Unit Compatible Glass Plate Sizes (W (more) x H) 18 x 16 cm Maximum Power Settings 500 V, 60 mA, 20 W Compatible Spacers 0.75 mm, 1.0 mm, 1.5 mm Features - Maximum glass plate size 18 x 16 cm - Rugged injection molded construction is durable and assembles easily - Run two gels with the addition of a divider plate - Built-in casting stand seals leak free - Choose from a wide variety of accessories - Plates, clamps, spacers, and combs are interchangeable with the SE600 Series The Hoefer SE400 Air-Cooled Vertical Protein Electrophoresis Basic Unit is a durable and economical system ideal for educational labs with multiple users. Constructed with rugged injection-molded materials, this compact unit is designed for longevity and ease of assembly, making it well-suited for consistent use in busy lab environments. The SE400 accommodates glass plates up to 18 x 16 cm, providing ample space for efficient protein analysis. With the addition of a divider plate, users can run two gels simultaneously, enhancing throughput and versatility. Equipped with a built-in leak-free casting stand, the SE400 streamlines the setup process, while its components—plates, clamps, spacers, and combs—are fully interchangeable with the SE600 Series, allowing labs to expand their setup with ease. Operating smoothly within standard lab conditions, it handles temperatures up to 45°C and humidity levels up to 80%, with power settings reaching 500 V, 60 mA, and 20 W, ensuring reliable performance for routine applications. Please note, the dropdown menu allows selection of a complete package based on preferred spacer accessory (0.75 mm, 1.0 mm, or 1.5 mm), which includes the following products: - Lower Buffer Chamber/Casting Stand on Leveling Base with High Voltage Leads - Upper Buffer Chamber - Safety Lid with Electrodes - Glass Plates, 18 x 16 cm, 2 pcs - Clamp Assemblies, 16 cm, 2 pcs - Cams, 2 pcs - Slotted Gasket for Upper Buffer Chamber - Bubble Level - Laminated Gasket for Casting Stand - Spacer-Mate-Alignment Template - Wonder Wedge Plate Separation Tool - Gel Seal - Comb, 15-well, 1.5 mm thick - Spacers, 1.5 mm thick, 2 cm wide, 2 pcs INCLUDED: The Hoefer SE400 Air-Cooled Vertical Protein Electrophoresis Basic Unit includes: - Lower Buffer Chamber/Casting Stand on Leveling Base with High Voltage Leads - Lower Buffer Chamber/Casting Stand on Leveling Base with High Voltage Leads - Upper Buffer Chamber - Safety Lid with Electrodes - Glass Plates, 18 x 16 cm, 2 pcs - Clamp Assemblies, 16 cm, 2 pcs - Cams, 2 pcs - Slotted Gasket for Upper Buffer Chamber - Bubble Level - Laminated Gasket for Casting Stand - Wonder Wedge Plate Separation Tool - Gel Seal - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

The redesigned wide Mini-Sub Cell GT Electrophoresis Cell offers updated features that make electrop (more)horesis even easier. The wide Mini-Sub Cell GT Cell is suited for multiple-sample, rapid-screening applications. This popular system has a wide platform that can separate 30 samples per comb. The wide Mini-Sub Cell GT Cell is the same width as the Sub-Cell GT Cell, so the comb holder, combs, and 15 x 10 cm gel trays are interchangeable with the larger Sub-Cell GT units. All wide Mini-Sub Cell GT Systems accommodate ReadyAgarose Precast Gels to save time and allow highly reproducible separations. The cells include a buffer tank, a safety lid with cables, and a leveling bubble. Cell size (WxLxH): 178 x 255 x 68 mm Gel tray sizes (WxL): 150 x 70 mm ReadyAgarose gels accommodated: Yes, wide mini and 96 Plus formats Sample throughput: 10 – 60 Base buffer volume: ~650 ml Buffer recirculation: No Bromophenol blue migration: ~4.5 cm/hr (at 75 V)

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Dock for the FlashGel electrophoresis system.

Edwards nEXT85H NW40 NW16 80W Turbomolecular Vacuum Pump Ultimate Vacuum <5x10-9 mbar Inlet Conne (more)ction NW40 Pumping Speed Nominal 2,820.00 l/min Features - Combines oil-lubricated ceramic and dry permanent magnetic bearings for enhanced durability - Built-in electronics for streamlined operation and easy integration with control systems - Enhances speed and compression efficiency for a wide range of applications - Allows for in-field replacement of oil cartridges and bearings with minimal tools - Offers standard, high light gas compression, and additional regenerative stage options for specific needs - Provides superior compression performance for various gases - Ensures efficient operation with reduced electrical interference - Magnetic bearings reduce noise and vibration, ensuring a stable vacuum environment The nEXT 85H pumps consist of the turbomolecular pump with a permanently attached controller containing drive electronics. The controller controls the electrical supply to the pump with the exception of standby speed control. It has no manual controls and can only be operated through the logic interface. To operate the nEXT-85 H pump you must connect it to your own control equipment and power supply or alternatively use the Edwards TIC Turbo Instrument Controller or TIC Turbo Controller. nEXT 85H pumps are supllied with an inlet-screen fitted into the centering O-ring for ISO version pumps and into envelope for CF version pumps. nEXT85 pumps with an NW 25 interstage-port are supplied with an inlet-strainer that fits into the interstage-port. The inlet-screen and inlet-strainer protect the pump against damage that would be caused by debris entering the pump. The nEXT 85 H pumps have a vent-port for venting the pump and vacuum system to atmospheric pressure. The pump is supplied with a manual vent-vavle fitted; this can be replaced with a TAV5 or TAV6 solenoid-operated vent-valve. The TAV valve can be directly controlled by the on-board controller. The nEXT pumps have a purge-port: an inert purge gas can be introduced protect the bearing and motor from corrosion. An optional vent-port adapter and purge restrictor can be fitted to the purge-port to control the flow rate of the purge gas and to filter the gas supply. Click Here to View Product Video INCLUDED: The Edwards nEXT85H NW40 NW16 80W Turbomolecular Vacuum Pump includes: - Operator's Manual - 1 Year Manufacturer's Warranty

Polyscience AP7LR-20-A11B 7L Low-Profile Refrigerated Circulator, Advanced Programmable (-20 to 200C (more)), 120V, 60Hz3D Visualization of the Polyscience CirculatorThe rendered image can be freely rotated in a full 360-degree view, allowing you to zoom in, pause, and explore every angle. For enhanced detail, the rendering can also be displayed in full-screen mode. This 3D model is designed exclusively for visualization purposes and may not accurately represent the actual appearance of your product. Your browser does not support iframes. The Polyscience AP7LR-20-A11B 7L Low-Profile Refrigerated Circulator is intended for the precise temperature control ofsuitable liquids in a reservoir. Extremely easy to use and maintain, itcombines design innovation with highly intuitive operation to deliverconvenient and versatile liquid temperature control for a wide range ofapplications.Features Time/temperature programming (ten 100-step programs) Intuitive 4.3” (10.9 cm) SmartTouch display 6 languages: French, German, Spanish, Chinese, Arabic, English Variable speed pump with open- and closed-loop external circulation capability Swivel 180™ Rotating Controller On-board connectivity: USB-A & B, Ethernet, RS-232/RS-485, and external temperature probe Event scheduling (time & date) with real-time clock Review temperature trends for up to 10 days Multiple selectable “home” screens On-screen help Automatic and/or user-adjustable performance optimization 5-point calibration capability INCLUDED: The Polyscience AP7LR-20-A11B 7L Low-Profile Refrigerated Circulator, -20°C to 200°C, 200W; 120V includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Temperature range: 30°C to 40°C Net content: 610 litres Dimensions (WxDxH): 715 x 800 x 2012 mm Inte (more)rnal dimensions (WxDxH): 590 x 675 x 1400 mm

Series 3 digital force gauges are designed for tension and compression force testing in numerous app (more)lications from 0.5 N to 500 N. The gauges feature a sampling rate of 2,000 Hz, producing accurate results under a wide range of test conditions. A backlit graphic LCD displays large characters, and a menu is available to access the gauges’ features and configurable parameters. USB output is provided for data collection purposes. Set point indicators are provided for pass-fail testing. The gauges are overload protected to 200% of capacity, and an analog load bar is shown on the display for graphical representation of applied force. An ergonomic, reversible aluminum housing allows for hand held use or test stand mounting for more sophisticated testing requirements. Series 3 digital force gauges are directly compatible with Mark-10 test stands, grips, and software.

F2 Mass Standard - rectangular weights. Nominal value - 5 kg.

The H315 waterproof scale Made to work in high humidity conditions and even direct contact with wate (more)r. Designed for precision measurements, making it used in situations where weighing readability is crucial. The power of steel The use of stainless steel for the construction guarantees you a long life for the balance. It is not afraid of contact with moist objects or accidental splashes. The robustness and strength of the design of the platform scales makes it possible to weigh large objects, such as pallets of goods. The stable platform is resistant to vibration, which is important when weighing large objects. Not just weighing But also parts counting, percent weighing, animal weighing and peak hold. The power of H315’s working mods. Do you require fast and repeatable weight measurement under difficult conditions? The H315 scale is made for that! It has been with us for years, and will stay for a long time to come The LCD display has accompanied us for long years. During this time it has proven its reliability. It guarantees the readability of the result from many angles and is energy efficient. Inner power No access to mains power? Power failure? No problem. Thanks to its internal rechargeable battery, the H315 scale allows many hours of operation without mains power (up to 7 hours). Battery power supply is available at an extra charge. As standard, the scale is equipped with a RS232 cable, to which you can connect most of the accessories from our range.