TQ TD1050 Steam Engine Trainer Teaching Rig Apparatus Lab

This listing is for a GE Healthcare Uniflux 10 TFF System.The unit is in full working condition and  (more)is ready for immediate release.Supplied with x2 Watson Marlow 520BP PumpsThe GE Healthcare UniFlux 10 is part of a fully automated series of tangential flow filtration (TFF) systems designed to facilitate clarification, concentration, and diafiltration across pilot to manufacturing scales. Here’s a comprehensive look at its features, capabilities, and applications:Overview:Fully Automated TFF/Cross Flow System: The UniFlux 10 is engineered for complete automation in tangential flow filtration, maximizing productivity and ensuring consistent, repeatable, and validatable results throughout the filtration process.Adjustable Flow Rate: The UniFlux 10 offers a flow rate range of 0.5 to 10 liters per minute, allowing flexibility to adapt to different sample volumes and process requirements while maintaining efficient filtration.Recirculation and Mixing Options: The system supports recirculation tanks ranging from 5 to 600 liters for efficient fluid management or can utilize single-use mixing systems as alternatives to traditional stainless steel tanks, simplifying setup and cleanup.Key Features:UNICORN Control Software: The UniFlux 10 utilizes UNICORN software for full automation, which includes comprehensive data logging capabilities throughout the entire cross flow process. This system is designed to comply with FDA regulations, particularly 21 CFR Part 11, making it suitable for use in regulated environments.Familiar User Interface: Users familiar with GE Healthcare’s chromatography systems, such as the bench-top ÄKTA systems and production-scale ÄKTAprocess, will find the UniFlux interface intuitive, facilitating a smoother transition for operators.Versatility in Filtration: The UniFlux system is suitable for microfiltration (MF) and ultrafiltration (UF) applications, incorporating high-performance cross flow filters like hollow fiber cartridges and filter cassettes tailored for diverse bioprocessing needs.Flow Rate Flexibility: Specifically, the UniFlux 10 features a flow rate range from 0.5 to 10 liters per minute, allowing for effective filtration tailored to varying sample sizes and process demands.Diaphragm Pump Technology: The use of a diaphragm pump ensures stable and consistent flow rates, essential for achieving optimal filtration performance.Optional Triple Inlet Valve: An optional triple inlet valve allows for the seamless introduction of multiple fluids—products, buffers, and cleaning solutions—without the need for switching tubing, enhancing operational efficiency.Equipment Services:OptiRun Service Solutions: GE offers comprehensive OptiRun service solutions, which can be customized to meet specific asset management needs and desired outcomes, ensuring that your UniFlux system remains in peak operating condition.Applications:The UniFlux 10 is ideally suited for:Biopharmaceutical Production: It is essential for the clarification and concentration of biological products, including monoclonal antibodies, vaccines, and other critical biopharmaceuticals, ensuring high yield and purity.Cell Culture Processing: Streamlines the filtration of complex cell cultures, enabling effective recovery of valuable biomolecules while removing unwanted debris and contaminants.Buffer Exchange and Diafiltration: Facilitates effective buffer exchange processes, essential for preparing products for downstream processing and formulation.

This Jun Air Oilless Air Compressor Model No. OF302-25MD2 was removed from a university lab where it (more) was surplus to requirements. We had the compressor professionally serviced and certified. The engineer fitted a new pneumatic pipe and it now is in full working order. It cycles at 120psi. It is in good cosmetic condition with only minor marks from use.

This Gast 5H Series Air Compressor Model - 5HCE-790D-M501X-1 was removed from a university lab where (more) it was surplus to requirements. The unit powers up and builds pressure but has not been tested further. It works well. It is in good cosmetic condition with minor marks.

HaB Douglas Bag Cart Systems 100 L Plus  Dry Gas Meter This was removed from a university lab w (more)here it was surplus to requirements. The unit is in good cosmetic condition but has not been tested. Please note that we have multiples of this unit in stock. You may not receive the one in the photos but will receive one in near-identical working and cosmetic condition. If you would like to see photos of the exact unit you are receiving upon purchase before it is shipped, we would be happy to provide this.

GE Healthcare / Cytiva Xuri Cell Expansion System W25 This system was removed from a university wher (more)e it was surplus to requirement. All units are in good cosmetic condition and powered up, we are unable to test the system further at our facility due to not having the required software. HP Elite desktop PC - No operating system or software included. We have left the PC with the system in case it has relevant hardware installed. This system comprises the following: Cytiva XuriTM Cell Expansion System W25 base unitCytiva Xuri Cell Expansion W25 PumpCytiva Xuri Cell Expansion W25 CBCU HP EliteDesk PC w/ Dell Monitor & HP Mouse and Keyboard. TH Cytiva Filter Heater

RAYPA IRE-160 refrigerated incubator. Capacity 160 L. Temperature range 0º C to 45 ºC. Forced air ci (more)rculation. Stability ± 1.5ºC; homogeneity ± 1.5 ºC. Digital temperature and time control. Two internal sockets for equipment connection. RS232 connection. Closing. Includes three trays. Dimensions (H*W*D): inside 73*51*43 cm; exterior 94*60*60 cm. Weight 75kg. User manual. Raypa IRE-160 refrigerated oven applications: Water analysis, B.D.O. (Biological Oxygen Demand), enzymatic reactions and bacterial cultures at low temperature, botany, conservation of samples, aging, cosmetics, etc.

This listing is for a Powervar UPM UPS Power Supply . The unit is in full working condition and is  (more)ready for immediate release. The Powervar UPM UPS is a power conditioned, sine-wave uninterruptible power supply designed to provide clean, conditioned power free from noise, voltage spikes, and common-mode disturbances. Key Features: Power Rating: The Powervar UPM UPS has a power rating of 1440VA/1296 Watts. Inverter Waveform: The UPS produces a low distortion sine wave output. Transfer Time: The transfer time is 4 ms. Frequency: The typical frequency is 60 Hz. Efficiency: The online efficiency (without charger) is 91%. BTU/Hr: The UPS has a BTU/Hr rating of 459. THD: The total harmonic distortion (THD) with 100% resistive load is not specified. Protection Features: Surge Diverter: The UPS is equipped with a surge diverter to protect against high-voltage surges. Noise Filter: The UPS has a built-in noise filter to reduce electromagnetic interference (EMI). Low-Impedance Isolation Transformer: The UPS features a low-impedance isolation transformer to provide fully conditioned isolated power. Ground Guard Technology: The UPS is designed with Ground Guard technology to prevent ground loops and eliminate the need for special dedicated-isolated electrical circuits.

Nanometrics Nanospec/AFT Microarea Gauge 010-0180 Lab This system was removed from a university engi (more)neering department as surplus to requirements. This system powers on and is in a reasonably good cosmetic condition, unable to test it further at our facility. System includes: Nanometrics CTS-102 Film Thickness Computer/power supplyM/N: CTS 102-7200-0536-01S/N: 1282-2-00549 1x Nanometrics PrinterM/N: 6420-19107S/N: 53892536 1x Olympus BH Base 1x Olympus BHM Stage 2x American Optical 10xWF Eyepiece 1x Olympus 5 Piece Nose Piece with 3 Objective Lenses: - 1x Olympus M10 0.25P/N: 412650 1x Olympus MPlan 100 0.90P/N: 402546 1x Olympus MPlan 40 0.63P/N: 405434

M1 Mass Standard - rectangular weights. Nominal value - 25 kg.

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

IKA Rocker 2D Digital Shaker Type of Movement 50 to 1,500 rpm Speed Range 5 to 80 RPM Angle Adjustm (more)ent Range 2.5 to 15° Features - Timer: Countdown, adjustable from 1 s to 99h 59min - Counter: Display of shaking time - Error Code Display - Different attachments enable use for a variety ofapplications - Usable at 4 to 50 °C in incubators - Easy operation with touch keypad - Anti-slip rubber mat included - Suitable for continuous operation - Shaking diameter: 0 - 15° (angle) - Speed range: 5 - 80 rpm Digital rocking shaker with adjustable speed for smooth mixing tasks. Used for homogeneous mixing in flasks, culture flasks, Petri dishes, and tubes. Even with load and voltage fluctuations, shaking speed remains constant. An adjustable tilt angle ensures optimum adaptation to the particular experimental conditions. The shaker features a timer with a countdown adjustable from 1 second to 99 hours and 59 minutes, and a counter for displaying shaking time. Different attachments enable use for a variety of applications, and it is usable at 4 to 50 °C in incubators. The easy operation with a touch keypad and included anti-slip rubber mat make it suitable for continuous operation, offering a shaking diameter of 0 - 15° and a speed range of 5 - 80 rpm. INCLUDED: The IKA Rocker 2D Digital Shaker includes: - RD 1 universal mat - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty (+ Additional Free 1 Year Warranty Extension with IKA Registration) IKA Rocker 2D Digital Shaker Specifications Type of movementrockingPermissible shaking weight (incl. attachment)2 kgPermissible ON time100 %Speed min (adjustable)5 rpmSpeed range0 - 80 rpmSpeed display7 segment LEDSpeed control1 RPM stepsTimeryesTimer display7 segment LEDTime setting min.1 sTime setting max.5999 minOperating modetimer and continuous operation Rocking angle adjustable2.5 - 15 ° Shaking platform stackableyesAltitude (when shaking platform stacked)30 mmDimensions (W x H x D)280 x 150 x 330 mmWeight2.2 kgPermissible ambient temperature4 - 50 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 21Voltage100 - 240 VFrequency50/60 HzPower input24 WDC Voltage24 VCurrent consumption1000 mAComparison of ModelsSpecificationRocker 2D BasicRocker 2D DigitalRocker 3D BasicRocker 3D DigitalType of movementrockingrockingtumblingtumblingPermissible shaking weight (incl. attachment)2 kg2 kg2 kg2 kgSpeed range5 - 80 rpm5 - 80 rpmfixed 30 rpm5 - 80 rpmSpeed control1 RPM steps1 RPM stepsN/A1 RPM stepsTimernoyesnoyesTime setting min.N/A1 sN/A1 sTime setting max.N/A5999 minN/A5999 minRocking/Tumbling anglefixed 8°adjustable 2.5 - 15°fixed 8°adjustable 0 - 15°Shaking platform stackableyesyesyesyesDimensions (W x H x D)280 x 150 x 330 mm280 x 150 x 330 mm280 x 165 x 330 mm280 x 185 x 330 mmWeight2.2 kg2.2 kg2.2 kg2.3 kgVoltage100 - 240 V100 - 240 V100 - 240 V100 - 240 V.comparison-table tr td:nth-child(3) { background-color: #fffacd; } DownloadsTechnical Specification Download Operator's Manual Download Request a Formal Quote