Offering the best quotes for your research!
New and used scientific instruments
🚚 Shipping Worldwide 🌎
✉️ info@questpair.com
Yamato DTS-830 327L Forced Convection Class 100 Clean Oven
Product Description
Yamato DTS-830 Forced Convection Clean Oven
- Capacity: 327L interior volume
- Circulation Method: Forced convection with rear exhaust
- Temperature Range: Room temperature +30 to 360°C
- Temperature Control Accuracy: ±0.5°C at 360°C
- Temperature Fluctuation: ±0.5°C at 360°C
- Temperature Distribution Accuracy: ±5.0°C at 360°C
- Temperature Gradient: ±10.0°C at 360°C
- Max Temperature Reach Time: Approximately 80 minutes
- Clean Level: Class 100 (when temperature stabilized)
- Interior Material: Stainless steel
- Exterior Material: Cold rolled steel plate with melamine resin baking finish
- Heat Insulation: Glass wool
- Heater: 9.0 kW stainless steel pipe heater
- Fan: Two 200W Scirocco condenser type motors
- Filter: Heat resistant HEPA filter with >99.97% efficiency at 0.3 μm particles
- Differential Pressure Meter: Analog type (0–300 Pa)
- Cable Port: Ø33 mm × 1 (right side)
- Caster Wheels: Free swivel without stopper (2 at front)
- Temperature Control: PID V control with digital setting (▲/▼ keys)
- Display System:
- Top screen: green 4-digit LED (1°C resolution)
- Bottom screen: orange 5-digit LED (1°C resolution)
- Operation Functions:
- Fixed temperature operation
- Program operation (up to 99 steps, 99 patterns, repeat function)
- Timer or clock operation with auto start/stop and quick auto stop
- Additional Monitors: Power consumption, CO2 emissions, heater output, power-on and operation timers (up to 65,535 hours)
- Communication: RS485 external terminal
- Sensor: K type thermocouple double sensor for temperature control and overheat prevention
- Heater Control: Triac with zero-cross control
- Safety Devices:
- Self-diagnostic (sensor failure, triac short-circuit, overheating prevention, heater line disconnect, main relay damage)
- Earth leakage breaker (40A)
- Fan motor failure detection
- Key lock function
- Independent overheating prevention device
- Door Switch: Stops fan motor and heater circuit when door is open
- Dimensions:
- Internal: 620 × 480 × 1100 mm (WxDxH)
- External: 850 × 1080 × 1955 mm (WxDxH)
- Weight: Approx. 335 kg
- Shelf Load Capacity: Approx. 30 kg per shelf
- Shelf Bracket: 35 steps with 30 mm pitch
- Power Supply: AC 220V three-phase, 24A, 50/60 Hz (no plug, round terminal)
- Shelf Plates/Brackets: 3 plates and 6 brackets included
Options: Recorder, manual/auto damper, N2 gas introducer with flow meter, emergency switch available.
Convertible Model: DES830 convertible to high-performance filter type maintaining Class 100 at stable/fluctuating temperatures up to 200°C.
Item Stats
Product details
| Circulation Method | Forced convection |
| Operating Temp. Range | Room temperature +30 to 360°C |
| Temp. Control Accuracy | ±0.5°C at 360°C |
| Temp. Fluctuation | ±0.5°C at 360°C |
| Temp. Distribution Accuracy | ±5.0°C at 360°C |
| Temp. Gradient | ±10.0°C at 360°C |
| Max. Temp. Reaching Time | ~80 min. |
| Clean Level | Class100 (when temperature is stable) |
| Interior Material | Stainless steel |
| Exterior Material | Cold rolled steel plate with melamine resin baking finish |
| Heat Insulating Material | Glass wool |
| Heater | 9.0kW (stainless steel pipe heater) |
| Fan Type | Scirocco fan, condenser type motor 200W x 2 |
| Differential Pressure Meter | Analog type (0 ~ 300Pa) |
| Cable Port | Inner diameter: 33mm×1 (right side) |
| Filter | Heat resistant HEPA filter (dust-collection efficiency >99.97% with a 0.3μm particle) |
| Caster Wheels / Adjuster | Free swivel caster wheels without stopper / level adjuster (2 at front) |
| Temp. Control / Setting Method | PID V control / Digital setting with ▲/▼ keys |
| Temp. Display System | Top screen: green 4-digit digital LED (resolution 1°C), Bottom screen: orange 5-digit digital LED (resolution 1°C) |
| Other Indications | LED indicates temperature patterns for heating/stabilizing/cooling |
| Operation Functions | Fixed temperature operation, Program operation (maximum 99 steps up to 99 patterns, with repeat operation function), Timer or clock operation function (Fixed temperature operation w/ auto start/auto stop/quick auto stop, program operation auto start) |
| Additional Functions | Power-on Time and Operation Time Accumulation Monitor (up to 65,535 hours); Calibration Offset; Monitoring Display for Accumulated Power Consumption, Total CO2 Emissions, and Heater Operation Output; Power Recovery Mode; Setting Data Backup and Recovery, External Communication Terminal (RS485) |
| Sensor | K type thermocouple double sensor (for temperature control and independent overheat prevention device) |
| Heater Control | Triac with zero-cross control |
| Safety Device | Self-diagnostic functions (Detection for Temp. Sensor Failure, Triac Short Circuit, Automatic overheating prevention, Heater Line Disconnect, Main Relay Contact Damage ), Earth leakage breaker, Fan Motor Failure, Key Lock Function, Independent overheating prevention device |
| Earth Leakage Breaker | 40A |
| Door Switch | Door open: fan motor and heater circuit off, Door close: fan motor and heater circuit on |
| Internal Dimensions** | 620×480×1100 mm (WxDxH) |
| External Dimensions | 850×1080×1955 mm (WxDxH) |
| Internal Capacity | 327L |
| Weight | ~335 kg |
| Withstand Load Of Shelf | ~30 kg / shelf |
| Number Of Shelf Bracket Step / Pitch | 35 steps / 30mm |
| Power Supply 50/60Hz (V±10%) | AC220V, three phase, 24A (no plug, round terminal) |
| Shelf Plate / Bracket | 3 pcs. / 6 pcs. |
Documents
About QuestPair
Our Mission
QuestPair is Europe's leading platform for scientific equipment, connecting researchers and organizations with verified suppliers of both new and pre-owned laboratory instruments in the biotech and material science industry. Our aim is to make the procurement of scientific instruments more efficient, cost-effective, and reliable, so that laboratories can focus on advancing science rather than searching equipment and negotiating deals.
Why Choose Us
Founded by scientists for scientists, we understand your challenges. Our AI-powered platform offers transparent pricing, verified quality, and expert support, ensuring you find the perfect equipment for your research needs.
Verified Quality
Every piece of equipment undergoes thorough verification by our expert team, ensuring reliability and performance.
Cost Efficiency
Access both new and premium pre-owned equipment, saving up to 40% without compromising on quality.
Expert Support
Our dedicated team provides personalized guidance throughout your equipment procurement journey.
Ready to Transform Your Research?
Join thousands of biotech scientists who trust QuestPair for their equipment needs.
What customers think about QuestPair
Brilliant service. Everything arrived and was exactly as expected
Jon Welburn
Great customer service! Got me great options for the equipment I was looking for and in a timely manner.
Pamela
Space Lab Technologies, LLCHarm is very responsive to help me find the right equipment. The product I received is in a good condition.
Ph.D. Hsin-Wen Liang
Northeastern UniversityFrom €24,426.84*ex. VAT
In Stock
Get a quote within one business day
Verified equipment
Trusted warranties & returns
Safe payment and fast delivery
Didn't find what you're looking for?
Our sales team specializes in sourcing custom and hard-to-find products to meet your exact specifications. Submit a request for a tailored quote.
Frequently Asked Questions
Is this equipment new or refurbished?
How long does shipping take?
What about warranty and returns?
Why request a quote?
Need help choosing the right tool?
- Accurate policy information specific to your chosen product
- Clear understanding of warranty coverage and terms
- Detailed return policy explanation
- Transparent shipping options and costs
Customer Service
Here to help you with: Product Inquiries, Shipping & Support, Technical Support, Business Inquiries and Press.
We are available to assist you Mon-Fri, 10am - 5pm CET.