Drying Oven Smart SLW 240 POL-EKO

An economic laboratory oven but complete with the necessary adjustments and safety devices. Fine tem (more)perature regulation, clear and complete display, top safety class, front regulation of the rear air inlet. Forced ventilation for a better temperature distribution and faster reaching of the set point. MATERIALS:     External structure in steel painted with anti-acid epoxy powder     Inner chamber in 18/8 stainless steel STANDARD:     PID thermoregulator with adjustable temperature up to 300°C     2 shelves     Rear 45 mm outlet with front device for adjusting opening/closing gap.     Safety class DIN 3.1 Microprocessor controlled Safety class DIN 3.1 (top DIN class) Laboratory Oven with forced ventilation STE-F 52 FALC

*No decon*Techne Hybridiser Oven HB-1D Lab This item was removed from a university where it was surp (more)lus to requirement. The unit powers up and is in good working order (thermometer not included). It is in good cosmetic condition, however it's missing both of its back feet. This item also includes the following: 4 x Techne Glass Vials

Yamato DKN-302C Programmable Forced Convection Oven 27L, 115V Temperature Range Ambient +10°C to 26 (more)0°C Temperature Distribution Accuracy ± 2.5°C (at 210°C) Chamber Volume 27L Features - Best seller based on excellent performance and affordability - Superior temperature accuracy - DKN302C/312C/402C/412C/602C/612C models come with observation windows - Programmable PID controller for easy program settings (30-step, 3-pattern program controller with repeat functions) - Fixed setting, Quick Auto stop, Auto stop, Auto start, Program operating modes with easy control capabilities - Increased safety and self-diagnostic functions - Overheating prevention and calibration off-set are possible with auxiliary functions - Easy to use and maintain - Built in exhaust ports The Yamato DKN-302C Programmable Forced Convection Oven 27L with extended functions and safety features. Bestseller based on excellent performance and affordability. Superior temperature accuracy. Comes with an observation window. Programmable PID controller for easy program settings (30-step, 3-pattern program controller with repeat functions). Fixed setting, Quick Auto stop, Auto stop, Auto start, Program operating modes with easy control capabilities. Overheating prevention and calibration off-set are possible with auxiliary functions. Easy to use and maintain. Equipped with built in exhaust ports. Operating temp ambient +10~260°C. INCLUDED: The Yamato DKN-302C Programmable Forced Convection Oven 27L, 115V includes: - 2 x Shelves w/ Brackets - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Memmert UN30plus Natural Convection Oven 32L, 115V Setting Temperature Range +20°C to +300°C Convec (more)tion Type Natural Convection Chamber Volume 32 L (1.1 cu. ft.) Features - 32L internal volume accommodates various sample sizes for lab versatility - TwinDISPLAY with dual high-definition TFT-color displays for precise control and monitoring - Temperature range from +20°C to +300°C with accuracy up to 99.9°C: 0.1, from 100°C: 0.5 - 2 Pt100 sensors DIN Class A in 4-wire-circuit for mutual monitoring and error prevention - Natural convection ensures uniform heat distribution for delicate samples - Pre-heated fresh air admixture with electronically adjustable air flap for consistent temperature control - Digital timer adjustable from 1 minute to 99 days for flexibility in lab processes - AutoSAFETY with over- and undertemperature monitoring to ensure protection and safe operation The Memmert UN30plus Natural Convection Oven 32L, 115V is a versatile and precision-engineered solution for temperature control in laboratory and industrial settings. With a 32L internal volume, this oven provides ample space for a variety of sample sizes while maintaining a temperature range from +20°C to +300°C. The oven’s advanced TwinDISPLAY system, featuring dual high-definition TFT-color displays, allows for precise monitoring and easy adjustments. Equipped with two Pt100 sensors in a 4-wire circuit, the UN30plus ensures consistent temperature accuracy, protecting your samples through mutual monitoring and error prevention. This oven also features natural convection for uniform heat distribution, ideal for delicate samples, along with a pre-heated fresh air admixture controlled by an adjustable air flap for optimal temperature stability. The digital timer, adjustable from 1 minute to 99 days, offers flexibility in various applications, while the AutoSAFETY system provides integrated over- and undertemperature protection for maximum safety. The easy-to-clean stainless steel interior, reinforced by ribbing, is corrosion-resistant, making the Memmert UN30plus both robust and reliable for continuous lab use. INCLUDED: TheMemmert UN30plus Natural Convection Oven 32L, 115V includes: - 1 x Stainless Steel Grid - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

DO305 Karl Fischer drying oven is ideal for the accurate determination of the water content of solid (more) or viscous samples, such as: Substances that release the water only at a high temperature, such as plastic in powder or granular form     Substances that cause lateral reactions with the Karl Fischer reagent, such as oxidizing inorganic salts     Substances that cause problems in the titration vessel because of their consistency, such as fibrous or pasty substances     Substances that are poorly soluble or insoluble, such as wool, dough, tar and coal

BINDER BD-115 incubator / oven with natural convection 100°C Model: BD115 Capacity: 115 liters Tempe (more)rature range: Room temperature plus 5 °C to 100 °C Inner glass door Integrated digital temperature display 2 shelves Cable passage: Ø 30 mm (on the right wall) Power supply: 230 V, Frequency: 50-60 Hz, Power: 400 W, Internal dimensions: 60 x 40 x 48 cm Overall dimensions: 83.5 x 75 x 70.5 cm Weight: 61 kg Tested at 37°C Overheating safety device functional but the indicator light is off

REC magnetic stirrer Advanced heating performance for your laboratory reactions REC features state-o (more)f-the-art heating plate technology, designed by VELP, which ensures temperature homogeneity, thermal efficiency and long-lasting heating performance. You can rely on the REC for laboratory applications performed at very high temperatures, as the maximum settable temperature of the heating plate is 550°C. Thanks to the extremely bright and easy-to-read digital REC display, it is possible to constantly monitor the set temperature by turning the convenient knob. Absolute safety and ease of use for laboratory operators The REC hotplate stirrer guarantees a superior level of safety and protection for laboratory operators, as it is entirely made of technopolymer and is equipped with an extremely resistant ceramic plate, ideal for high resistance to acids, bases and solvents . When the platen temperature is above 50°C and the heating function is not active, a safety message is displayed. The control panel is positioned at a safe distance from heat sources and the technopolymer structure is carefully designed so that accidental spills of liquids cannot reach the electronics. The extremely durable ceramic soleplate is easy to clean and resistant to acids, bases and solvents. Using a damp cloth, all residues will be easily removed. It is not possible to connect the REC model to Velp's Cloud Ermes.

Brooks Life Sciences IntelliXCap Automated Screw Cap Decapper/Recapper 48-format This item was remov (more)ed from the university lab where it was surplus to requirement. It is in good cosmetic condition and powers on, we are unable to conduct further testing at our facility, but it has been confirmed that it was working prior to removal. Includes the following: - FluidX Scope USB Reader PN - FLX-20-1003SN - 1003-0220-0076Powers on via USB - Manuals 2 x boxes of tubes (96 tubes per rack) 2D Coded (size not specified)One box is full the other has around half of the tubes left - FluidX Perception HD Barcoded Rack Reader PN - 20-4018SN - 4018-0320-0096Powers on via USB

Labconco CentriVap DNA Centrifugal Concentrator Centrifugal force and vacuum rapidly evaporate s (more)olvents from multiple small samples DNA rotor holds seventy-two 0.5mL sample tubes or sixty 1.5 or 2.0mL sample tubes Memory stores nine user-set programs Corrosion-resistant diaphragm pump achieves vacuum of 7 mBar; has pumping capacity of 34L/min. Heat and run times set separately, each from 1 to 999 minutes so that heat may be programmed to shut down sooner than run to protect heat-sensitive samples from excessive heat exposure after solvent evaporates Large phenol-free lid seal ensures good vacuum without potential for phenol contamination Easy-to-read LCD display prompts user to set program parameters and displays program number, actual and set point temperatures, point heat, and run time remaining INCLUDED: The Labconco 7970010 CentriVap DNA Centrifugal Concentrator, 115V, 60Hz includes: - DNA Rotor - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

MA X7.IC.A moisture analyzers are hi-tech measuring instruments intended for quick determination of  (more)relative moisture content, dry mass content and other parameters in samples of different substances. MA.X7.IC.A series is equipped with innovative system: the drying chamber can be opened and closed automatically using button or proximity sensors. Such solution allows: Maintaining moisture analyzer clean – operator does not touch moisture analyzer’s housing. Removing any shocks caused by manual closing of the chamber – the chamber closes automatically and always with the same intensity. Achieving high repeatability of opening and closing the drying chamber. Enhancing drying process automation. Enhancing safety of operation by eliminating contact with hot components of drying chamber. Improving operation ergonomics. MA.X7.IC.A series features user-friendly colour touchscreen. Free configuration of the control panel can be done by means of hotkeys, customizable information fields and programmable labels. Drying process can be carried out for any temperature and – thanks to databases – particular drying process may be set for a specific product. Highlights of X7 Series moisture analyzers: Automatic opening and closing of the drying chamber 7” capacitive colour touchpad Modern interface Uncomplicated, intuitive operation Programmable display Drying profiles (standard, mild, step, fast) GLP/GMP printouts-reports Repeatable and customized applications Work optimization due to the use of halogen lamps Capacity and temperature MA.X7.IC.A maximum capacity ranges from 50g/0.1mg to 210g/0.1mg. Moisture content is measured with the 0.01% accuracy (0.001 % for samples bigger than 1.5g). The maximum drying temperature is 160˚C (there is an optional moisture analyzer with 250˚C maximum temperature). An additional element for moisture analyzers that improves their functionality is a water vapour permeability determination set used in tanning industry for determining hygienic properties of leather. Databases: Information system of X7 series moisture analyzers is based on 8 databases, allowing many users to operate product database comprising many samples. Collected measurements may be subjected to subsequent analysis. Collected data is registered in 8 databases: Products (up to 5000 products) Users (up to 100 users) Packaging (up to 100 packagings) Customers (up to 1000 customers) Drying programs (up to 200 drying programs) Drying process reports (up to 5000 drying process reports) Ambient conditions (up to 10000 records) Weighings (up to 50000 records) The results The results obtained using the moisture analyzer (the final result of the drying process): % M – the mass loss in %; displays the mass change recorded during the drying process, expressed as a percentage, % D – the dry mass obtained during the drying process, expressed as a percentage; the result is the portion of the sample that remains on the weighing pan after the moisture has evaporated, % R – the ratio of moisture content to dry mass, obtained during the drying process, expressed as a percentage; the result is the portion of the sample that evaporated during the drying process, g – the sample mass after drying. Interfaces USB interface ensures quick transfer and copying of any results of your work (measurements, reports, databases) to a computer or other moisture analyzer. Remote access to the moisture analyzer allows for online data management. Cooperation with E2R allows for external data management which in turn increases the efficiency and results to the maximum.

ZWIEBEL calibration weight 500g class M1 INOX Laboratory calibration weight in stainless steel Brand (more): ZWIEBEL Weight: 500 g Type / class: M1 maximum permissible error: ± 25mg LZ 67 Weight checked on a precision balance at 0.01g (10mg) - see photo In its wooden box uncalibrated weight