New Brunswick Scientific Innova CO-170 Lab Spares/Repairs NOTE - THIS IS A SPARES/REPAIRS ITEM

New Brunswick Scientific Innova CO-170 Lab This item was removed from a university lab where it was  (more)surplus to requirements. The unit powers up and is in fairly poor cosmetic condition with some rust, it has been temperature-tested. (thermometer not included) The unit developed a back-light fault in the screen during CO2 testing. It is sold as Spares/Repair.

This BIO RAD Bio-Plex System, Luminex XYP & Luminex 100 Multiplex was removed from a university  (more)lab where it was surplus to requirements. The system powers on and is in a reasonably good cosmetic condition, we're unable to test it further at our facility. System includes: BIO RAD Luminex XYPModel: Luminex XYPSerial#: LXY05066104 BIO RAD Luminex 100Model: Luminex 100Serial#: LX1000503501

Immunetics MiniBlotter 16. 2x16 channels. Max reagent volume per channel: 350μL. Channel width x len (more)gth: 3.0 mm x 5.5 cm. Blots width 8.3 cm. For membrane assays including Western, Northern, and Southern Blots and Checker-board Blots. Requires microliter volumes, not milliliter volumes. Multiple samples analyzed simultaneously. No cross-contamination between channels. Decrease processing time. All results on a single membrane. Compatible with all standard electrophoresis systems. With the Immunetics MiniBlotter enable you to perform multiple antibody or probe incubations on a single membrane, using microliter volumes of reagent. Typical applications include monoclonal antibody screening on western blots, animal and human serum screening, and DNA probe hybridizations. Sample processing is streamlined through use of the Washing Manifold, which enables washing of all sample lanes simultaneously. Reactions can be detected by all conventional methods, including enzyme conjugates, chemiluminescence and radiolabels.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Manufacturer: Qiagen Model: ESEQuant LR3 Description: The ESEQuant LR3 is a highly sensitive, robust (more) and cost-effective fluorescence measurement system for rapid testing at the point of need. This flexible and reliable system, based on a ready-to-use concept, allows you to easily develop fluorescence or colourimetric tests. Starter kits are immediately available and can be quickly adapted to different test strip or cassette formats. The powerful combination of fluorescence reader, state-of-the-art touchscreen and comprehensive Lateral Flow Studio software for developers provides an easily customisable and simple to use lateral flow system. Key features: - Small, stand-alone instrument - Customisable system with short time to market - Simplified data entry via modern touchscreen - LIS and HIS connectivity for easy integration - Fulfilment of legal requirements Technical specifications Housing: Customisable for different cassette formats Portable device with a weight of <2 kg (4.4 lb.) Small footprint of 230 x 200 x 100 mm (9.1 x 7.9 x 3.9 inches) Optics: Colourimetric or fluorescence detection Internal calibration with standards Highly sensitive Electronics: Interactive 17.8 cm (7 inch) touch screen Battery operated Embedded PC Software: Standalone operation Customisable GUI Pre-installed algorithms Connectivity: LIS and HIS connectivity Ethernet and 4 USB ports Optional: WLAN and Bluetooth Optional accessories: Internal or external barcode reader Printer RFID reader Scope of delivery: - ESEQuant LR3 - Operating instructions as PDF via e-mail The device is in absolute top condition and has been 100% tested for function.

Siemens Immulite 2000 Immunoassay System This was removed from a university lab where it was surplus (more) to requirements. The item powers on and runs through initialisation steps, the built-in computer boots up and has Immulite 2000 Version 6.9 Software installed. The touchscreen works. It is in good cosmetic condition with minor marks. We powered it with the provided UPS. Included with it are; AMETEK PowervarModel - ACDEF3000-22PN - 17302-02R Accessories/Consumables:-4 x Packs of Reaction Tubes (1000 per pack) REF - LRXT12 x Sample RacksImmulite 2000/2000 XPi System Software/Release Notes V.6.7Tool box

IKA RV 10 Auto Pro V Flex Rotary Evaporator Features - 4L heating bath optimized for rapid achieveme (more)nt of working temperature, with a temperature safety circuit and boil-dry protection - Integrated vacuum controller and timer function - Bright, high-contrast, TFT, color-graphic control panel with simple menu navigation and programming for up to ten individual procedures - Automatic cooling water management, heating bath management, and ventilation - Right or left flask rotation with push-off mechanism for tightly-fitting flasks - Digital interfaces: USB port and RS-232 interface for remote control Motorized lift with Safety-Stop function, which lifts the receiving flask from the heating bath in case of a power failure Precise setting of distillation method per solvent with direct volume and efficiency control Integrated solvent library with 40 preset solvents and the ability to expand to incorporate new processes The completely revised RV 10 auto is the flagship of the IKA Rotation Evaporator product line. Its impressive features include an innovative handling concept with a bright, high-contrast, TFT, color-graphic control panel, an integrated vacuum controller, cooling water monitoring and mature safety standards. The RV 10 auto offer all properties required for efficient, safe, and cost-effective operations. These include automatic control of the vacuum and cooling water volume. Its intuitive handling concept quickly leads its users to their desired results in every application. Thanks to specially designed glass guides, the condenser makes extremely efficient use of the 1500 cm² cooling surface. Thanks to its extended ramp programming capability, the RV 10 auto allows users to carry out customized procedures. Other innovative features, such as smooth start, interval mode, right-left operation in interval mode, or the timer function for time-lapse tests, make everyday work in the laboratory much easier. Safety is ensured by the motorized lift with safety-stop function that automatically lifts the evaporation flask out of the heating bath in the case of power failure. Additional safety for users is provided by individually adjustable temperature safety circuits, protection against boiling dry, adjustable end-point recognition to prevent glass breakage, and a locking function. The receiving flask and the condenser are also available in coated versions. The USB port or the RS-232 interface enable remote control with the IKA “labworldsoft” software package and an update option with the firmware update tool. The device comes complete with vacuum hoses and hose connectors for your in-house cooling water supply. The new IKA Vacstar digital included in the package is controlled directly from the drive unit of the RV 10 auto via the data cable provided. INCLUDED The IKA RV 10 Auto Pro V Flex Rotary Evaporator includes: - RV10 control - HB digital S099 Heating Bath - IKA VACSTAR digital Vacuum Pump - RV 10.900 Glassware vertical - RV 10.73 Vapor tube (NS 24/40) - RV 10.8001 Seal - RV 3.4 Woulff bottle - RV 3.1 Support pole - Vacuum hose (2 x 0.55 m) - Water discharge hose (1 x 1 m) - Water discharge hose (1 x 1 m) - USB cable - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty (+ Additional Free 3 Year Warranty Extension with IKA Registration) IKA RV 10 Auto Pro V Flex Rotary Evaporator SpecificationsType of coolingVertical condenserCooling surface1500 cm2Speed range5 - 300 rpmReversible direction of rotationyesSpeed tolerance set rotation speed &lt; 100rpm1 ±rpmSpeed tolerance set rotation speed 100rpm1 ±%LiftMotorStroke140 mmHeating temperature rangeroom temp. - 180 °CHeat output1350 WSet temperature resolution1 ±KFilling volume max.4 lVacuum controller integrated yesTimer yesVacuum pumpVacstar digitalDimensions (W x H x D)500 x 430 x 440 mmWeight52.34 kgPermissible ambient temperature5 - 40 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 20RS 232 interfaceyesUSB interfaceyesAnalog outputyesVoltage100 - 240 VFrequency50/60 HzPower input100 WPower input standby3.3 WComparison of ModelsSpecificationRV 10 Auto Pro V FlexRV 10 Auto VRV 10 Digital VRV 3 VRV 8 VType of CoolingVertical CondenserVertical CondenserVerticalVerticalVerticalSpeed Range5 - 300 rpm5 - 300 rpm5 - 280 rpm20 - 300 rpm5 - 300 rpmLiftMotorMotorMotorManualManualStroke140 mm140 mm140 mm150 mm120 mmHeating Temperature RangeRoom Temp. - 180 °CRoom Temp. - 180 °CRoom Temp. - 180 °CRoom Temp. - 99 °CRoom Temp. - 180 °CTimerYesYesYesN/AN/ADimensions (W x H x D)500 x 430 x 440 mm500 x 430 x 440 mm500 x 430 x 440 mm440 x 530 x 330 mm510 x 490 x 345 mmWeight52.34 kg34.96 kg32.36 kg28.3 kg25.76 kgRS 232 InterfaceYesYesYesN/AN/AUSB InterfaceYesYesYesN/AN/AVoltage100 - 240 V100 - 240 V220 - 240 / 115 / 100 - 240 / 100 - 120 / 100 - 115 V100 - 240 V100 - 240 V.comparison-table tr td:nth-child(2) { background-color: #fffacd; }Request a Formal Quote

The anti-draft chamber is an optional accessory intended for WAY KO mass comparators working in unfa (more)vourable conditions (air-drafts). It is mounted on a table, inside the mass comparator is placed. The chamber features sliding top and side panes allowing free access to the weighing chamber of the mass comparator. All components of the anti-draft chamber are made of metal and glass with conductive coating eliminating influence of electrostatics on the weighing result.