Coffetek Gourmet Vitro 6 4 Cannister Touch Display Coffee Machine

Coffetek Gourmet 83545 Touch Display Coffee Machine Lab This item was removed from a university wher (more)e it was surplus to requirement. It is in good cosmetic condition and powers on, but is missing the powder hoppers and drip tray. It is sold for spares/repairs Key not included.

Pair of Etna Nova Bean to Cup Coffee Machines Model no. NES121BXLHECU30 These have been removed from (more) a university kitchen where they were surplus to requirements. Both machines have been powered up but have not been tested further. They are in reasonable cosmetic condition with some marks from use. They could do with a deep clean before they are used again. Neither machine has a drip tray. Individual dimensions - L60 X W33 X H88cm

Coffetek Gourmet 83545 Touch Display Coffee Machine Lab This item was removed from a university wher (more)e it was surplus to requirement. It is in good cosmetic condition and powers on, but it has been out of use for 5+ years. It will require a service. Key not included.

Coffetek Gourmet 83545 Touch Display Coffee Machine Lab This item was removed from a university wher (more)e it was surplus to requirement. It is in good cosmetic condition and powers on, but it has been out of use for 5+ years and it would require servicing before use.Key not included.

Thermoplan Black & White 3 CTM-RF Fully Automatic Coffee Machine Spares/Repairs This was removed (more) from a university pub where it was surplus to requirements. The unit powers up but we were unable to test it further. The grounds drawer is missing. The university confirmed that it may have some issues, and it has some superficial damage, but it could be refurbished. It is sold for spares/repairs as we are fairly sure it will have issues.

Azkoyen Palma H87 Vending Machine This was removed from a university campus where it was surplus to  (more)requirements. The unit powers up and is in full working order. Capacity: 480 Products

Sony 3CCD Colour Video Camera DXC-390P and Adaptor CMA-D2CE This was removed from a university lab w (more)here it was surplus to requirements. All modules power up but have not been tested further. Everything is in good cosmetic condition with minor marks. Camera:Model DCX-390PSerial No. 4018813-CCD 1/3" format, 800 tv lines S/N 63, RGB C-mount camera Adaptor:Model CMA-D2CESerial No. 27147 Included with the camera and adaptor are a power lead, a dc power lead and data lead between the two units.

LABORATORY INCUBATORS ILW SMART POL-EKO ILW - POWERFUL, FOR MICROBIOLOGICAL TESTS ILW incubators are (more) perfect for the stable and safe incubation of samples, in any working environment. They maintain a constant temperature from 0°C to 70°C (It's necessary to purchase automatic defrosting function, ILW PLUS, for all units operating at set point <=5°C to prevent icing). The version capable of reaching -10 °C is available as an option, while with the SMART PRO version you can expand the heating range up to +100 °C. More! Large touch display, alarms, lock, easy to clean stainless steel interiors will make the use of these incubators a breeze. Thanks to the programming with time and temperature profiles, you will be able to carry out highly precise and repeatable incubations. But it doesn't end here, continue reading and discover all the other surprising features of these incubators! ABSOLUTE CONTROL The SMART control panel is among the most complete you can find on the market. Large symbols and temperature values ​​guarantee comfortable and clear reading, combined with disarming ease of use. The latest generation touch screen responds to commands even if touched with latex gloves and is equipped with a large display: all values ​​are perfectly readable from any angle, regardless of the intensity of the light. DO YOU KNOW THE ADVANTAGES OF AN ADVANCED CONTROLLER LIKE THE SMART PANEL? - Sharp 4.3' color touch screen - Quick and easy data transfer: via LAN or USB - Fast, multi-segment, time and temperature programming - Visual and audible alarms with colored bar on display - Internal memory for programs and data storage - User manual downloadable directly from the controller - Loop function up to 255 times or infinite - Controls can be managed even when wearing latex gloves - Recording of the minimum, average and maximum temperature value for each segment - Overview of the set and current parameters during operation - Operation in temperature or time priority mode - ... and much more More and more? POL-EKO has already thought about it. For those who want cutting-edge functions and the freedom of transfer and remote use, POL-EKO offers you the SMART PRO controller. You can find all the differences between the SMART and SMART PRO panel in our dedicated post: insights on SMART and SMART PRO. With the SMART PRO versions, more accessories and options will also be available. QUALITY FIRST Resistant. Durable. POL-EKO incubators are designed and built to guarantee the best performance. They are a smart purchase, for customers who want to invest in the future of their laboratory. By choosing these products you will have precise results for years and years, repeatable and in complete comfort. The ILW SMART series incubators are built with the best materials and equipped with the most important accessories, to give you a complete and ready-to-use standard product. - Double door: solid external; glass interior - Interior in acid-resistant stainless steel according to DIN 1.4301 - Insulated door with lock - Protection class 2.0 - Protection class 3.3 (DIN 12880) as option - Stainless steel shelves - USB port for downloading recording data, events, manuals, service - LAN port - Open door alarm - Access port for external sensor - Available in the special models FOT (SMART version) and FIT (SMART PRO version) FOCUS: Photoperiodic (FOT) and phytotron (FIT) systems allow day/night simulation. While the FOT option allows you to turn the light on and off from the display thanks to a program, with the FIT option you can also control the intensity of the light. To find out more, download our informative PDF: The photoperiodic (FOT) and phytotron (FIT) systems by POL-EKO. ILW SMART SERIES POL-EKO offers 5 models of refrigerated incubators with capacities from 56 to 749 litres. The ILW series are only available in the forced air version. DETAILS AND ACCESSORIES Every detail of your POL-EKO models is designed to make routine work as simple and comfortable as possible. Below, the front and rear view of your future ovens for drying, analysis or testing. 1 - Rating plate 2 - Access port for external sensor 3 - Internal glass door 4 - Shelf 5 - Condenser housing 6 - Solid external door 7 - Temperature sensor 8 - Ventilation 9 - Door open sensor 10 - Touch screen control panel 11 - USB port 12 - Handle with lock 1 - Main switch 2 - Adjustable feet 3 - LAN port 4 - Fuse 5 - Main power socket C20 OPTIONS POL-EKO allows you to increase the possibilities of your incubator with quality accessories; to better adapt to particular applications or to equip the instrument with safety systems and advanced connections. In the photo, the FIT system (phytotron) for the ILW SMART PRO models. - Door with viewing window - Stainless steel shelf - Perforated shelf - Stainless steel basins - Automatic defrost function - Version up to -10°C - Reinforced version - Interior light - Photoperiodic system - Internal socket - LabDesk software - IQ OQ PQ calibration and qualification - Overtemperature protection class 3.3 according to DIN 12880 - Backup battery for the display in case of power failure - Dry alarm contact - LAN cable - Non-standard 20/60/100 mm access door - Additional 30 mm access door

Cruma 1200G fume hood. Pre-filter and carbon filter with microchip and USB Type A connection for org (more)anic vapours from liquid products. Average air speed 0.50 m/s. Microprocessor control and LCD display with indication of type of filter installed, working hours, expiry and next inspection, date and time and countdown timer. Programmed alarms and warnings. LED lighting. Noise level < 58 dB. Spill retention tray. Includes table with wheels. Dimensions (cabin only): 1200*800*1097 mm; 118 kg. User manual. The Cruma 1200G fume hood is a high-quality piece of equipment designed to ensure safety when handling chemicals and toxic gases through a carbon filter and efficient extraction system that ensures the elimination of harmful vapours and particles in the work environment. In addition, the Cruma 1200G hood offers a large work surface and excellent visibility thanks to its transparent polymethyl methacrylate front panel. With intuitive and easy-to-use controls, this hood allows the gas extraction speed to be adjusted according to the user's needs. Ideal for laboratories, chemical and pharmaceutical industries, the Cruma 1200G fume hood is a reliable and safe option to protect the health and well-being of workers.

Memmert ICP260 Refrigerated Forced Circulation Incubator 256L, 115V Setting Temperature Range -12°C (more) to +60°C Setting Accuracy Temperature 0.1 °C Chamber Volume 256 L (9 cu. ft.) Features - Working temperature range from -12°C to +60°C with optimum performance between +16°C and +34°C - Large 256 L (9 cu. ft.) capacity - Inner glass door provides visibility while maintaining internal conditions - TwinDISPLAY with digital PID-microprocessor controller and high-definition TFT-color displays - Energy-efficient, CFC-free cooling system with automatic defrosting - Precise temperature control with a setting accuracy of 0.1°C - Durable construction with rear zinc-plated steel and stainless steel interior - Comprehensive safety features including AutoSAFETY over- and undertemperature protection The Memmert ICP260 Refrigerated Forced Circulation Incubator 256L, 115V offers precision temperature control within a -12°C to +60°C range, making it ideal for sensitive applications in laboratory settings. This model features a generous 256 L (9 cu. ft.) capacity, with a robust stainless steel interior and an inner glass door, ensuring easy observation without disturbing internal conditions. Equipped with TwinDISPLAY, an adaptive PID-microprocessor controller with high-definition TFT-color screens, the ICP260 provides reliable, intuitive control of temperature, fan speed, program time, and more, with settings in both Celsius and Fahrenheit. The incubator’s air jacket heating system delivers uniform heat distribution while the energy-efficient, CFC-free cooling system with automatic defrosting keeps operations smooth and sustainable. Safety is a priority with built-in AutoSAFETY over- and undertemperature protection, visual and acoustic alarms, and a mechanical temperature limiter that activates if the heating exceeds nominal limits. From its durable zinc-plated housing to its AtmoCONTROL software support for efficient programming and data management, this Memmert incubator combines advanced functionality with user-friendly design, meeting high standards for laboratory applications. INCLUDED: The Memmert ICP260 Refrigerated Forced Circulation Incubator 256L, 115V includes: - 2 Stainless Steel Grids - USB Drive w/ Software &amp; AtmoCONTROL Manual - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.