Orbit Marine AL-7100-LCU Control Unit Local Lab

Safety and resistance for your laboratory OHS advance is designed to guarantee the highest safety st (more)andards. - The durable watertight housing and IP 54 protection rating ensure durability even in the most aggressive environments. - Built-in safety alarms for overload, over temperature and over current will maintain performance over time by stopping agitation - The safe operation of the start and stop knob and the lock key prevent unintentional starts and changes in working conditions. - The built-in vibration sensor with different sensitivity levels will stop the operation and inform you to make sure your OHS is stable and properly fixed. Continuous operation guaranteed and supported by a 3 year extended warranty. First-class performance OHS 200 Advance is the ideal solution for demanding applications operating with viscosities up to 100,000 mPa. The electronically controlled brushless motor of the OHS 200 Advance agitates up to 100 l (H2O) with a maximum torque of 200 Ncm and guarantees maximum durability. SpeedServoTM torque compensation technology maintains constant speed by automatically adapting to changes in viscosity. Set the OHS 100 Advance electronic speed control from 30 to 1300 rpm. Constant Torque at Any Speed The powerful brushless motor and microprocessor control ensure unprecedented performance, highlighting the difference between a conventional rod stirrer and VELP OHS Series rod stirrers. The torque remains constant at any speed, even at maximum. Having a constant torque is a very important parameter for the reproducibility of the analyzes. SmartChuck Technology: Inserting or Removing an Auction Has Never Been So Simple! How often do you have to remove or replace the stirring rod using two hands and see the rod fall into the liquid? SmartChuck ™ technology makes this activity quick and easy with the use of one hand and without special accessories. Two simple movements allow you to unlock the protection ring and remove or replace the stirring rod. In the event that the protection ring is opened during the analysis, the instrument stops shaking, showing a safety message on the display. Intuitive and precise control panel The intuitive 3.5” OHS Advance TFT display will guide you to precisely set your working conditions and achieve reproducible results. Show key information at a glance. Real-time information on viscosity variation with a resolution of 1 Ncm. Interact with OHS Advance from the real-time graph showing speed, torque and temperature of your test. The OHS Advance works without surveillance thanks to the timer that can be set from 1min to 99.59h. Ideal operating methods can be defined and programmed for demanding tasks where ramps and interval operations are required. Temperature under control OHS Advance is supplied with a Pt100 temperature probe included in the package. Constantly monitor the temperature of your reaction and set the meter to slow down or stop activity if the temperature reaches a defined value. This is important when you want to prevent exothermic reactions from interfering with your analysis! THE BENEFITS OF OHS ADVANCE CONNECTIVITY The OHS Advance is the only rod stirrer to offer the ability to control and monitor processes via Wi-Fi connection to VELP Ermes and via USB. The VELP Ermes cloud platform allows you to control the OHS Advance from PC, smartphone and tablet through a simple and intuitive web interface. With this platform designed by VELP it is possible to activate the shaking, set a timer, set a method (among those saved on the device), download and share reports with a click. For applications in the pharmaceutical, biotechnology and life science sectors, VELP Ermes can manage OHS Advance localized in clean rooms or other controlled environments, without the need for lengthy safety procedures. With the OHS / CotrollerSoftTM software, VELP offers the possibility to all laboratories that cannot benefit from cloud services, a valid alternative with USB connectivity. The OHS allow you to choose between two different control panels, Digital or Advanced, to better suit the needs of your laboratory. - Digital: precise speed settings; torque indicator; integrated timer. - Advanced: all information at a glance; intuitive; real-time graphs. Very easy to use and comfortable tools. Intuitive control panel equipped with Smartchuck: operations and rod change with one hand, effortlessly. - Mandrel opening: Ø from 1 to 13 mm - Stirring rod diameter for Pass-Through: up to 8.5mm Velp products guarantee you peace and security within your laboratory. - Safety button clearly visible from the front - IP54 protection - Integrated safety sensors CONTROL PANEL OF OHS ADVANCE MODELS A - LCD display B - Display keys C - Stirring speed kond D - Lock key E - Main switch F - Smart Chuck

B.O.B Stevenson Type 7736 MN 40500 Centrifugal Fume Extraction Fan This item was removed from a univ (more)ersity where it was surplus to requirement. It is in good cosmetic condition, we are unable to test it further at our facility.

Limpsfield LCNP15 Natural Gas 1305 Kw Burner with Autoflame Control System This item was removed fro (more)m a university where it was surplus to requirement. It is in good cosmetic condition and in good working order. The item details are as follows: Model LCNP15Serial No. 01160Manufactured 30.05.14Output 1303Kw/hr With Autoflame Combustion Management SystemPart Nos. 2 x MM10005, Serial Nos. 12294, 12331 Siemens Ignition Transformer Type ZE 23/8.5 Dungs LGW 50 A4 pressure switch WEG W22 7.5hp 415 volt fan motor Caldaia A Condensazione high limit cut-off control 2.0" gas inlet pipe

Hakko Electronics Monitouch V810iCD screen Monitouch V810iCD ( by Fuji Electric ) Display Type : TFT (more) Color LCD Colors : 65K Color or 32K color with blink mode Resolution : 640 x 480 Rating : IP65 with gasket / IP20 from rear Memory : approx 4.5 MB SRAM : 128 KB PLC 9 Pin Serial Ports : DB9F (RS232C, RS422, RS485)Data transfer 8 pin Modular Serial Ports : 2 - RJ45 (RS232C, RS422, RS485) 24VDC PWR 10.4" VGA TFT UL/c-UL CE Analog Resistive Touch Switch Built-in Ethernet Weight : 5 Kg

Are you overwhelmed by the number of production processes? What about having them all under control? (more) To be able to analyse and correct them in real time? After all, it is the key to increasing the efficiency of the production line! Our clients, the factory owners, were the ones who told us about their problems and needs. Our answer is simple: the E2R System. This software is designed to make your work easier. The E2R System consists of six independent modules: 1. E2R Weighing, 2. E2R Weighing Records, 3. E2R Formulations, 4. E2R PGC, 5. E2R Checkweigher, 6. E2R Moisture Analyzer. Choose the best module for your company. Need more information? With the E2R PGC module, you can: safely and continuously record measurements and controls at the weighing workstations; buffer the weighings and controls on the scales and transmit them to the computer; carry out product controls in grams and millilitres; carry out destructive and non-destructive controls; automate the control process; control operator errors; support dual-platform scales; carry out two controls at one weighing workstation; synchronise time of the weighing workstations; transfer the “Products”, “Operators” and “Schedules” databases from the computer to the scales; schedule a cyclic product control on the selected scales; set a reminder to take a measurement in an ongoing control with the possibility of using a signalling option; check correctness and determine tare thanks to the average tare module; determine the average tare before each control or at the set interval; record weighings and controls taken from the scales into the computer; monitor the status of scales and controls in the system; disable the measurement recording for tare outside the tolerance range; disable the recording of the net mass measurement outside the tolerance range; exchange data with external systems; use friendly and flexible reporting mechanisms, such as: - generating information on measurements and archived controls from a particular time interval, - data browsing using filtering option, - a summary of selected weighing-related information, - reporting of individual weighings, - determining headers of individual weighing reports, - generating weighing statistics reports, - changing the batch quantity in the control to meet the statutory ranges criteria, - changing the batch number in the control, - adding individual comments to the control report. - export control and weighing reports to files: PDF, HTML, MHT, RTF, XLS, XLSX, CSV, TXT and more; customize the permission levels for different users of the system; customize the graphical interface, reports and graphs; work with external software for stockpiling, billing, accounting, and ERP systems; work with RADWAG weighing systems; select the language of each of the system components; work almost anywhere over Ethernet and Wi-Fi.