Limpsfield Model LCNP15 Natural Gas 1305 Kw Burner with Autoflame Control System

Limpsfield LPN3/2051 Natural Gas Burner 2051 KW/hr (7.0MBtu/hr) This item was removed from a univers (more)ity where it was surplus to requirement. It is in good cosmetic condition and in good working order. The item details are as follows: Model LPN3/2051Serial No. 1561Manufactured 24.02.17Output 2051 KW/hr 7.0 MBtu/hrDungs Control System With Autoflame Combustion Management SystemPart Nos. MM10005, MM10004 Serial Nos. 21267, 52981 WEG W22 7.5hp 415 volt fan motor

Limpsfield LCNP15 Natural Gas 1305 Kw Burner with Autoflame Control System This item was removed fro (more)m a university where it was surplus to requirement. It is in good cosmetic condition and in good working order. The item details are as follows: Model LCNP15Serial No. 01162Manufactured 30.05.14Output 1303Kw/hr With Autoflame Combustion Management SystemPart Nos. 2 x MM10005, Serial Nos. 12272, 12302 Siemens Ignition Transformer Type ZE 23/8.5 Dungs LGW 50 A4 pressure switch WEG W22 7.5hp 415 volt fan motor 2.0" gas inlet pipe

Limpsfield LCNP15 Natural Gas 1305 Kw Burner with Autoflame Control System This item was removed fro (more)m a university where it was surplus to requirement. It is in good cosmetic condition and in good working order. The item details are as follows: Model LCNP15Serial No. 01159Manufactured 30.05.14Output 1303Kw/hr With Autoflame Combustion Management SystemPart Nos. 2 x MM10005, Serial Nos. 12303, 12290 Siemens Ignition Transformer Type ZE 23/8.5 Dungs LGW 50 A4 pressure switch WEG W22 7.5hp 415 volt fan motor Caldaia A Condensazione high limit cut-off control 2.0" gas inlet pipe No testing carried out.

*Dimensions not added* BMM Weston Steam Generator Model 2616 w/ Lubron Osmostar 250 Water Purifier L (more)ab This system was removed from a university where it was surplus to requirement. Testing on these units is not possible due to the original hard-wiring of the steam generator and the presence of residual water in the filters and pipes. The steam generator will require re-wiring before use. Unfortunately, the copper pipes were cut during removal, rather than being properly disconnected, therefore, will require substantial recommissioning work to get the system up and running again. This system comprises the following: BMM Weston Steam GeneratorModel 2616Serial No. DH14744Two 30KW heating elements123-litre boiler capacity168˚C design temperature6.6 bar operating pressure Lubron Water Technologies Reverse Osmosis SystemModel Osmostar 250Serial No. 10022407Year 2010250 litres per hour, 30 bar working pressure Lubron Softstar Water SoftenerSerial No. 10012208Year 2010

The PowerPac Basic power supply is designed to provide constant voltage or current electrophoresis a (more)pplications. The power supply operates at the value specified for the constant parameter, with limits for the other parameters. To prevent damage to the electroferese cell, the PowerPac Basic provides automatic crossover to constant current or constant voltage depending on which set limit is first reached. If the set limit of the non constant parameter is reached, the power supply will switch, making the limiting non constant parameter the new constant. Output specifications: Voltage: Adjustable from 10 to 300 volt, in 1 volt increments Current: Adjustable from 4 to 400 mA, in 1 mA increments Power: 75 W

Hiden Isochema Intelligent Gravimetric Analist+ DSMS Mass spec This system was removed from a univer (more)sity where it was surplus to requirement. All units power up and are in good cosmetic condition, we are unable to test the system further at our facility. The lab confirmed the system was working prior to removal. The system includes the following: Hiden Gravimetric Gas sorption analyserSN - HALIGA157Powers on, PC has MASsoft Professional Software installed. Hiden Analytical DSMS Dynamic Sampling Mass SpectrometerModel - HAS-301-414 PLSN/Ref - WR 12971 Hiden Analytical HAL301/3FSN - 3F2R-0/A/81447/E Edwards 1.5 PumpModel - E2M1.5Code - A371-32-919SN - 086277133 Vacuubrand Diaphragm Vacuum PumpModel - MD1SN - 31507705 Hiden Analytical Furnace Power ControllerPowers on Parts fitted:Hiden Analytical Model - HAS037001SN - 314001 Hiden Analytical Model - HA-092-0010SN - 310-003 Pfeiffer VacuumModel - TC600SN - 0829014257 Hiden Analytica Cryo Furnace Circulation UnitModel - HAS0221248SN - 314-001 Has 2 Vacuubrand Diaphragm Vacuum Pumps fitted and one spareModel - MD1 PC/Accessories:Dell Vostro 200Dell 19" Monitor & KeyboardIBM MouseAll Powers on Software discs:Hiden IGA Systems Software CD V2.148Hiden Analytical Software Suite v4.25Software USB - Has above software saved on usb Other accessories included:Blue case of screws & copper gaskets2 x Dilvac Dewar Flask & Containers 2 x 35cm1 x Dilvac Flask 12 x 23cmSmall Furnace - Model HAS0221267 - Unable to test Manuals:IGA Systems manualHiden Vacuum ManualsHiden MASsoft professional manual set

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

KNF IP65 UFEM 1.10 FT.18RCP2 Liquid Pump KNF SIMDOS diaphragm pumps offer a variety of options to su (more)it most laboratory liquid metering and dosing needs. The UFEM 1.10 FT.18RCP2 version has a liquid transfer flow rate of 1 – 100 mL/min and discreet dosing volumes of 1 – 999 mL. It is constructed with the following chemically-resistant fluoropolymer flow path materials: PTFE head, PTFE covered diaphragm, and FFKM valves. The easy-to-read display combined with a touch control knob makes programming and access of all functions very intuitive. Besides onboard manual control, this pump offers analog control, start/stop and reset/prime TTL logic control, output signal fault alarm, and RS 232 PC control. A RC control interface cable and RS 232 cable with D-Sub 9 connector are included. A foot switch for start and stop impulses is available. All SIMDOS pumps are simple and intuitive to operate, compact, and quiet, making them a welcome addition to any business or academic lab. They are effective against pressures of up to 85 psig and transfer viscous media up to 500 centistokes (reduces flow rate above 150 cSt). The integrated software permits the transfer parameters to be modified for a range of different viscosities at the touch of a button. With a durable and IP65 splash-proof design, these pumps are maintenance free, and provide trouble-free ±2% accuracy and ±1% repeatability performance. SIMDOS 10 pumps are self-priming up to 9.8 feet of water, and can run dry indefinitely without damage. Also, unlike peristaltic pumps, there are no troublesome tubing to break or fatigue. INCLUDED: The KNF IP65 UFEM 1.10 FT.18RCP2 Liquid Pump includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

IKA Vortex 3 Vortexer Shaking Movement Orbital Orbit Diameter 4 mm Speed Range 500-2,500 rpm Featu (more)res - Suitable for short-time (touch function) or continuous operation. - Wide, infinitely adjustable speed range. - Attachments and inserts available for tubes, microplates, and flasks - Attachments securely click onto appliance; special strap available for easy handling of flasks. - Sturdy zinc die cast casing with a compact design. - Stable at high speeds; ultra-high vibration damping and low self-heating motor. The vortex shaker is designed for both short-time (touch function) and continuous operation, making it versatile and efficient for various laboratory needs. Its wide, infinitely adjustable speed range and compatibility with multiple attachments and inserts (such as Eppendorf tubes, microtiter plates, and 250 ml Erlenmeyer flasks) allow for a wide range of applications. The shaker features a sturdy zinc die cast casing, a compact design, and stability at high speeds thanks to its special feet with ultra-high vibration damping and a self-ventilating motor for low self-heating.

Boekel Scientific 260200 Orbitron Rotator I, 115V Boekel Scientific Orbitron I Lab Mixer is a fixed  (more)speed nutating mixer. Excellent for any lab application requiring a gentle, low foaming agitation. Supplied with a 12 x 12” tray and dimpled mat. Features: •Pad is removable for easy cleaning and test tube transport •Gentle, low foaming agitation •Small footprint •Thin power cord easily passes through incubator door gaskets •Rugged steel platform has notches for bungee cords if necessary •Fixed speed and position platform •Supplied with dimpled mat and 12 x 12 tray INCLUDED: The Boekel Scientific 260200 Orbitron Rotator I, 115V includes: - 12 x 12 Tray with Dimpled Mat - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty