Limpsfield LCNP15 Natural Gas 1305 Kw Burner w/ Autoflame Control System

Limpsfield LPN3/2051 Natural Gas Burner 2051 KW/hr (7.0MBtu/hr) This item was removed from a univers (more)ity where it was surplus to requirement. It is in good cosmetic condition and in good working order. The item details are as follows: Model LPN3/2051Serial No. 1561Manufactured 24.02.17Output 2051 KW/hr 7.0 MBtu/hrDungs Control System With Autoflame Combustion Management SystemPart Nos. MM10005, MM10004 Serial Nos. 21267, 52981 WEG W22 7.5hp 415 volt fan motor

Limpsfield LCNP15 Natural Gas 1305 Kw Burner with Autoflame Control System This item was removed fro (more)m a university where it was surplus to requirement. It is in good cosmetic condition and in good working order. The item details are as follows: Model LCNP15Serial No. 01162Manufactured 30.05.14Output 1303Kw/hr With Autoflame Combustion Management SystemPart Nos. 2 x MM10005, Serial Nos. 12272, 12302 Siemens Ignition Transformer Type ZE 23/8.5 Dungs LGW 50 A4 pressure switch WEG W22 7.5hp 415 volt fan motor 2.0" gas inlet pipe

Limpsfield LCNP15 Natural Gas 1305 Kw Burner with Autoflame Control System This item was removed fro (more)m a university where it was surplus to requirement. It is in good cosmetic condition and in good working order. The item details are as follows: Model LCNP15Serial No. 01159Manufactured 30.05.14Output 1303Kw/hr With Autoflame Combustion Management SystemPart Nos. 2 x MM10005, Serial Nos. 12303, 12290 Siemens Ignition Transformer Type ZE 23/8.5 Dungs LGW 50 A4 pressure switch WEG W22 7.5hp 415 volt fan motor Caldaia A Condensazione high limit cut-off control 2.0" gas inlet pipe No testing carried out.

*Dimensions not added* BMM Weston Steam Generator Model 2616 w/ Lubron Osmostar 250 Water Purifier L (more)ab This system was removed from a university where it was surplus to requirement. Testing on these units is not possible due to the original hard-wiring of the steam generator and the presence of residual water in the filters and pipes. The steam generator will require re-wiring before use. Unfortunately, the copper pipes were cut during removal, rather than being properly disconnected, therefore, will require substantial recommissioning work to get the system up and running again. This system comprises the following: BMM Weston Steam GeneratorModel 2616Serial No. DH14744Two 30KW heating elements123-litre boiler capacity168˚C design temperature6.6 bar operating pressure Lubron Water Technologies Reverse Osmosis SystemModel Osmostar 250Serial No. 10022407Year 2010250 litres per hour, 30 bar working pressure Lubron Softstar Water SoftenerSerial No. 10012208Year 2010

RS Biotech Galaxy R+ Incubator Lab This was removed from a university lab where it was surplus to re (more)quirements. The unit powers up and has been tested with a digital thermometer (not included).We were unable to set the temperature to the MAX due to it having a faulty display, therefore it is listed as Spares/Repair. It is in reasonably good cosmetic condition, although the motor at the back of the incubator is producing a continuous buzzing sound and the screen is very dark, which may indicate a faulty backlight. This item also includes the following: 9 x Metal containers with glass lids and bases.

Carl Zeiss 47 16 90 Polarisation Microscope with 2 x Objectives This was removed from a university  (more)lab where it was surplus to requirements. The item powers on and both objectives are clear and in working order. It was powered up using an in-house Zeiss power supply (not included). It is in good cosmetic condition with minor marks. Item includes: 1 x Plan 2,5/0.08 Carl Zeiss objective (46328 -9903)1 x PH2 NEOFLUAR 40/0.75 objective (46 07 21)1 x Carl Zeiss Lamp (46 72 59)1 x Zeiss eyepiece (46 40 44-9902)1 x Zeiss eyepiece (46 40 42-9903)1 x Ocular Lens Assembly (47 30 12 - 9901)1 x Carl Zeiss 5 Objective Nosepiece Holder (47 31 59-9902) Serial number- 070577Model number- 47 16 90-0000/13

Assorted Millipore, Mobius & Thermo Scientific Polythene Drums & Trolleys These were removed (more) from a working lab where they were surplus to requirements. Included are; Mobius Polyethylene Drum 180L x 1 1 HoleSerial#: N/A Millipore Polyethylene Drum 200L x 1 1 HoleSerial#: N/A Thermo Scientific Polythene Drum 100L x 1No HoleSerial#: 11100-0030 Unbranded Polythene Drum 100L x 1No HoleSerial#: N/A Mobius Polythene Drum 100L x 11 HoleSerial#: N/A Millipore Polythene Drum 100L x 1 1 HoleSerial#: N/A Nalgene Polythene Drum 55L x 2No HoleSerial#: 11100-0015 Nalgene Polythene Drum 18L x 2No HoleSerial#: 11100-0005 Unbranded Polythene Drum 15L x 1 2 HolesSerial#: N/A All drums are in good cosmetic damage with minimal wear and no damage. Drum Dolly 65cm x 2 Drum Dolly 54cm x 1 Drum Dolly 47cm x 1 Drum Lid 65cm x 2 Drum Lid 50cm x 2 Drum Lid 39cm x 1 Drum Lid 36cm x 1 Drum Lid 33cm x 1

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

Ohaus EX24001 Explorer Precision High Capacity Balance, 24000 g, 0.1 g Maximum Capacity 24,000 g Rea (more)dability 0.1 g Repeatability (Typical) 0.1 g Features - High-capacity balance with a maximum capacity of 24,000g and certified readability of 1g - AutoCal automatic internal calibration maintains daily accuracy and reduces the need for external masses - Large 5.7" full-color VGA touchscreen display with adjustable three-level angle - Superior shock, spill, and splash resistance with IP54 metal base and die-cast top housing - Standard RS232 and USB communication ports with optional Ethernet connectivity - Quadrastance design and cable storage system for enhanced stability and organization - Fast stabilization time for quick and efficient measurements - Full housing in-use cover and calibration lock for added protection and security The OHAUS Explorer Balance Series offers a blend of advanced features and modern design, providing unmatched functionality for laboratory and industrial applications. With capacities ranging up to 35kg and readabilities from 0.1mg to 0.1g, these balances cater to a wide range of precision weighing needs. Key features include the AutoCal™ automatic internal calibration system, ensuring daily accuracy without the need for external weights, and a large color touchscreen that simplifies operation through an intuitive interface.Many explorer balances are designed for versatility, featuring up to 14 application modes and multiple connectivity options such as RS-232, USB, and optional Ethernet. The modular design allows for flexible workspace integration, and select models include a frameless draftshield with motorized side doors, operated via programmable touchless sensors for hands-free efficiency. AD models offer automatic door functions, enhancing convenience, while N models are NTEP certified, ensuring compliance with strict readability and repeatability standards. D models feature dynamic capacity ranges, making them adaptable for various weighing tasks.Durable construction with a metal base, stainless steel pan, and integrated weigh-below hook ensures long-lasting performance. The Explorer series also supports advanced user management, data logging, and security features, making it ideal for regulated environments. Whether for basic weighing, parts counting, or more complex measurements, the OHAUS Explorer Balance Series delivers precision, reliability, and ease of use, setting a new standard in high-performance balances. Click Here to View Product Video INCLUDED: The Ohaus EX24001 Explorer Precision High Capacity Balance, 24000 g, 0.1 g includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Scientific Industries Digital MicroPlate Genie PulseThe Digital MicroPlate Genie Pulse single positi (more)on microplate mixer features aggressive and uniform mixing of single microplates with speeds from 500 RPM to 3000 RPM and a shaking orbit of 1.0mm diameter. The Pulse “ON” and “OFF” times can be set from 0.1 seconds to 99 minutes for a more random motion and thorough mixing. The Digital MicroPlate Genie Pulse digital control and display of speed and time offers reproducibility and accuracy, with true speed display as well as fully programmable RUN/STOP modes. Accepts most microplate types, even in 384-well formats. The Digital MicroPlate Genie Pulse is new in the box . Includes: Power Cord Original Manufacturer Documentation Full 2 Year Parts and Labor Warranty Scientific Industries Digital MicroPlate Genie Pulse Specifications Speed 500-3000 RPM (750 – 2850 RPM for 230V models) Time 0 – 99 minutes or continuous Pulse-ON/OFF 0.1 seconds – 99 minutes Vortexing Orbit 1.0mm diameter Max. Capacity 1 microplate, any type with standard SBS footprint Dimensions (D x W x H) 165 x 165 x 165mm 6.5 x 6.5 x 6.5in Weight 2.75 Kg (6.1 lb)