Servomex Analyser Series 1400 CO2 Analyser Lab

This listing is for a Magellan Instruments Tandem Pro Gas Analyser. The unit is in full working con (more)dition and is ready for immediate release. The Magellan Instruments Tandem Pro Gas Analyzer is a self-contained O2 & CO2 gas analyzer. The PRO system comes with an internal gas pump and programmable display. It includes calibration functions, error reporting and dual 4-20mA outputs. An RS232 output is included for integration into control systems. Benefits: Greater understanding of your cells and processes Physiological state measurement on-line Scale-up and scale-down predictions Batch variation studies: feature analysis Metabolic flux analysis and mass-balance calculations Accurate fed-batch control Batch variation studies: anomaly analysis Metabolic activity based feeding Dedicated, continuous, standard signals for all your reactors On-line information, allows real-time calculation of RQ, CER, OUR, growth rate, KLa, etc. 0-10V and 4-20mA, with RS232 on PRO & Multiplex Integrates to any reactor size (250ml – 100m3)   Specifications: Feature CO2 O2 Measurement Principle: Infrared Absorption Electrochemical Range: 0-5%, 0-10%, 0-20% 0-30%, 0-50%, 0-100% Resolution: 0.01% 0.01% Accuracy: ±2% of full scale ±2% of full scale Drift: <0.05% / month full scale <0.05% / month full scale Operating Temperature: 0 – 45°C 0 – 45°C Temp. Compensation: Included 0.02%/°C T90 Response Rate: <50 secs <10 secs

Servomex Analyser Series 1400 CO2 Analyser Lab This item was removed from a university where it was  (more)surplus to requirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

ATI Portasens lll Gas Leak Detector Kit Model D16 with H2O2 Sensor Lab This item was removed from a  (more)university where it was surplus to requirement. It is in very good cosmetic condition and powers on, we are unable to test it further at our facility. The gas leak detection kit contains the following items: 1 x main D16 detection unit1 x ATI H2O2 sensor1 x H10 Sensor Keeper 00-09811 x Sampling Wand for localised detection2 x Tenenergy 10,000 mAh NiMH rechargeable batteries1 x Intellicharger Newi2 charger with power cable1 x Dwyger Instuments Minimaster flow meter1 x calibration t-fitting1 x filters1 x 1/4" straight connector1 x USB cable1 x hard carry case

This Oxford Intelligent Level Meter ILM 210 was removed from a university lab where it was surplus t (more)o requirements. The unit powers on but we were unable to test it further. The unit shows an error on the display, but this is down to it not being connected to gas. It was not tested further. It is in good cosmetic condition with some minor marks from use.

Siemens Sitrans LG270 Radar Transmitter Type - LG270,AXHT01HXVDAX This was removed from a university (more) lab where it had been used as part of a larger rig. It has not been tested and has some of the rig attached. It is in reasonably good cosmetic condition but has marks from use.

Varian Star 3400 CX gas chromatograph with onboard printer, dual FID detectors and dual split/splitl (more)ess injectors. Note: this unit is sold as is, no warranty applies. This unit turns on but no further tests have been performed.

Water bath from 25°C to 100°C for the laboratory The ring baths for columns, Erlenmeyer flasks or be (more)akers are suitable for continuous operation, even unattended, thanks to the standard level and lack of water monitoring. LAUDA Hydro ring water baths are available in five models, all featuring a removable perforated lid with a set of heat-resistant plastic rings. - Operations in a temperature range from 25 to 100°C. - Models H 11 V, H 19 V have been specially designed for safe use in fume cupboards. - The housings are made of stainless steel to allow their use even with chemically aggressive fluids. - Temperature regulation by knob with graduated scale - Lid with set of rings for opening the modular tank - Water level and lack control, for continuous unattended operations - The support rods (length 600 mm, diameter 12 mm), made of stainless steel, are included as standard - Hydro is protected against dry running by an electro-mechanical valve. In case of low water, the heating is stopped In the photo, simple control panel, with knob, graduated scale, warning light and safety valve. Ring opening, to adapt to different types of glassware. Standard water level regulator for continuous operation, even unattended. Safety system in case of water shortage LAUDA evaporization baths are protected against dry running by a cut-off device for lack of water (thermostatic overvoltage). The nut located on the control panel will be used to disarm the security system. Water level regulator as standard Thanks to this accessory, the loss of water inside the instrument (through evaporation) is compensated and the water level is kept constant. Furthermore, it allows use at temperatures below ambient temperatures, with a minimum of approx. 3°C above tap water temperature.

Portable pH / ion meter with InLab Expert Go-ISM Seven2Go Pro's simplified menu, LED status light an (more)d uFocus measurement screen provide users with fast, high-quality data. Seven2Go's easy-to-reach buttons and sleek design ensure comfortable one-handed operation. Seven2Go Pro's IP67 design, sunlight-resistant screen and rugged uGo carrying case ensure reliable data, even in difficult and isolated conditions. ISM® Ready: Reduced chance of errors When any InLab ISM® (Intelligent Sensor Management) sensor is connected, the instrument automatically recognizes the sensor and stores the sensor ID, serial number and last calibration data. Specifications - Seven2Go pH / Ion meter S8-Std-Kit Parameter: pH; Ion; ORP Channel: Single channel Version kit: Ready-to-use measuring kit Sensor: InLab Expert Go-ISM PH measuring range: -2 - 20 PH resolution: 0.001; 0.01; 0.1 Accuracy pH (±): 0.002 Ion concentration measurement range: 1.00E-9...9.99E+9 Ion concentration resolution: 3 or 4 digits (automatic interval) Ion concentration accuracy (±): 0.5% Measurement range mV 0 Resolution mV 0.1; 1 Accuracy mV (±): 0.1 Temperature range (2): -30°C...130°C Temperature resolution: 0.1°C Temperature accuracy (±): ± 0.2°C Portable: Yes Safety and Compliance: GLP; Password protection; User Management Compatible with Intelligent sensor management (ISM): Yes Memory capacity: 2,000 measurements Data transfer: PC Degree of protection: Watertight and dustproof (IP67) Languages: English; Italian; French; Polish; Russian; Portuguese; Chinese; Korean; German; Spanish; Thai; Japanese Ease of Use: Multilingual menu; Calibration support; Backlit Memory size: 2000 measurements mV measuring range: -2,000.000...2,000.000

Heidolph Glassware Set G5Dry Ice condenser for low-boiling solvents - Glassware set includes one 1,0 (more)00-ml evaporating flask and one 1,000-ml receiving flask - Evaporating flasks and vapor tubes which come with a standard NS 29/32 joint size are also available with NS 24/29 ground joints - Ventilation cap without ground joints for easy handling and grease-free operation included - A venting valve with refill function is optionally available - Not suitable for the automated distillation program Dynamic AUTOaccurate on Hei-VAP Expert / Ultimate Control models - Also available upon request: glassware sets for Soxhlet extraction and descending condenser system INCLUDED: The Heidolph Glassware Set G5 includes: - G5 Dry Ice Condenser - 1 Liter Receiving Flask - 1 Liter Evaporating Flask - Full 3 Year Manufacturer's Warranty

Do you need a balance that not only determines weight with impressive accuracy, but also performs a  (more)digital audit, responds to your voice commands and sends you light messages? If so, learn about the functionality of the ELLIPSIS series of balances: Digital Weighing Auditor Ensures that your balance is ready for use. It enables air buoyancy compensation in real-time. What is more, it informs about the need for a balance inspection or a periodic audit of the balance&rsquo;s accuracy and sensitivity. 10-Inch Display Bigger screen &ndash; 10&rsquo;&rsquo; &ndash; means more information in one place. On the new ELLIPSIS terminal, you will see up to 3 screens, widgets, graphs, statuses, notes, handy measurement history. Uncompromising User Verification For the first time ever, the balance will verify the user using a password, RFID card, fingerprint reader, facial recognition mechanism, or any combination of these. Ambient Light &ndash; An Innovative Way for the Balance to Communicate With the User The light colour will tell you about status, process results, procedures, or alerts. Hotspot Use the balance on any device connected to it. This can be a smartphone, tablet, or computer. RFID ELLIPSIS works with RFID tags* that can be used to tag your products or formulation ingredients in the database. They can also be used to identify a user. Live Note &ndash; Note Down Your Conclusions It&rsquo;s the first time you can add a voice memo to a measurement series or procedure report. If you prefer to write it down, ELLIPSIS allows you to add a text note. Handy Library This is where a series of recent measurements or a report ready for digital signature, according to 21 CFR Part 11, can be found. Widgets Prepared to display what you need most at any given moment. Smart Min Weight The balance displays whether the value of the weight you want to weigh is below or above the minimum weight threshold. 21 CFR Part 11 Do you work in the pharmaceutical industry? Do you need a digital signature? We are offering the laboratory balance which as a standalone fully meets the requirements of 21 CFR Part 11/ EU GMP Annex 11. - Full data security - Electronic signatures - Validations - Electronic records - Audit trails Modbus TCP/IP is one of the most popular communication protocols in industrial automation. Implementing it in the 5Y balances and CY10 scales makes the devices of this series friendly to automation integrators. A balance or scale in a Modbus system is a slave device and performs tasks specified by the master device which is most often a PLC. Protocol Modbus TCP/IP in the 5Y balances and C10 scales enables, among other things, the realization of mass readout, zeroing and tare functions of the device, as well as tare settings and MIN and MAX thresholds. Two-point adjustment Adjacency, which takes place at two measurement points instead of one, improves measurement precision over the full weighing range. And what does this mean for you? More accurate measurement. Under-pan weighing Weighing instruments purchased after 15th February 2023 will allow under-pan weighing at any time after the purchase. All you need to do is just to order a dedicated hook. * RFID ISO/IEC 14443 Type A, 13.56 MHz

PS.R2 series balances represent a new standard of precision balances. They feature a new, readable L (more)CD display which allows a clearer presentation of the weighing result. Besides, the display has a new text information line allowing to show additional messages and data, e.g. product name or tare value. Communication interfaces New PS.R2 balances, like previously designed PS series balances, have pans in two possible dimensions: 128x128 mm or 195x195 mm balances with a smaller pan have a draft shield. The balance precision and the measurement accuracy is assured by automatic internal adjustment, which takes into consideration temperature changes and time flow. PS.R2 balances feature several communication interfaces: 2 x RS 232, type A USB, type B USB and optional Wireless Connection. The balance may cooperate with computer by means of USB interface supposing a supplementary software has been installed (respective driver). The said driver may be downloaded from RADWAG website &ndash; SOFTWARE link or SUPPORT section. The housing is made of plastic, and the pan is made of stainless steel. The balances have a possibility to weigh products out of the pan (under-pan weighing) - the load hangs under the pan. Databases in R Series Balances The information system is based on 5 databases, which allows for several users to work with several products databases, and the registered weighing results can be subject to further analysis. The data is registered in 5 databases: users (up to 10 users), products (up to 1000 products), weighments (up to 5000 weighments), tares (up to 100 tares), ALIBI memory (up to 100 000 weighments). Quick access to information There is two directions data exchange within the system thanks to a quick USB interface. New balances allow to import and export databases using USB pen drives. Direct access to functions and databases is possible from the level of keyboard. Database - a direct access to databasis Function - a direct access to the basic functions F1 do F4 - programmable function and navigation keys on the menu ALIBI memory The used ALIBI memory is a data secure area and allows to record up to 100 000 weighment records. It ensures security of constant data register in the long time period. Under-pan weighing Weighing instruments purchased after 15th February 2023 will allow under-pan weighing at any time after the purchase. All you need to do is just to order a dedicated hook. THBR 2.0 System Cooperation with THBR 2.0 System for ambient conditions monitoring.

Real Time PCR Cycler Corbett Rotor Gene 3000. Fully equipped for real-time amplification, endpoint a (more)nalysis, autocall genotyping, and nucleic acid concentration measurement. Rotor for  72 0.1 ml strip tubes. Excitation source 470nm, 530nm, 585nm, 625nm high power LEDs. 510nm, 555nm, 610nm and 660nm, 580nm, 610nm high pass and bandpass detection filters. Detected fluorophores Sybr-Green I, Fam, Tet, Joe, Vic, Max, Rox, Tamra, Cy3, Cy5, Cy5.5, Tex Red. Temperature range 25 - 99 ° C. Heating / cooling range 2.5 ° C / sec (tube temperature); uniformity +/- 0.01 ° C. Includes PC and software. User manual. Real Time PCR Cycler Corbett Rotor Gene 3000. The Rotor-Gene multi-filter system can detect all available real-time chemistries including Sybr-Green, dual-labelled and MGB probes, FRET and Molecular Beacons.Most DNA amplification enzymes/ buffers can be used on the system to generate Quantitation/Melt data. It is not necessary to use expensive kits that are specific to the instrument. Additionally, Rotor-Gene offers the most user-friendly real-time analysis software system currently available. Using an experiment Wizard, a new real-time protocol can be setup within a matter of minutes in a few easy to follow steps.