Compass CX221 Ohaus

IN/OUT cable (PUE C41H, PUE HY10, PUE 5.15, PUE 5.19). Lenght 2 m. Cable types: Standard P0256.2: 2  (more)m Customized P0256.5 (extra charge): 5 m Customized P0256.10 (extra charge): 10 m Compatible with: Scales operated via PUE C41H terminal Scales operated via PUE HY10 terminal Scales operated via PUE 5.15 terminal Scales operated via PUE 5.19 terminal PUE C41H terminal PUE HY10 terminal PUE 5.15 terminal PUE 5.19 terminal HRP platform MWSH weighing module MWLH weighing module

This is the first receipt printer of RADWAG production. We offer two models which differ in terms of (more) communication interfaces: RTP-RU80 – RS 232* and USB, RTP-UEW80 – USB, Ethernet and Wi-Fi. The printers communicate with all RADWAG laboratory balances and industry scales. Their connection and configuration is intuitively easy and takes barely few moments (Plug and Play). Communication via Wi-Fi enables remote printing. The printers are equipped with a paper cutter ensuring operation ergonomics. The set includes: RTP-RU80: printer; power supply; cable with a plug of European standard, type C or E/F; USB cable; RS232 cable, female/ male; 80 mm thermal paper, 1 roll; RTP-UEW80: printer; power supply; cable with a plug of European standard, type C or E/F; USB cable; 80 mm thermal paper, 1 roll. *RS 232 port comes in a female version

Character communication protocol is designed for communication between RADWAG balance and external d (more)evice via RS232, Ethernet or Wi-Fi* interfaces. The protocol consists of commands sent from the external device to the balance and responses sent from the balance to the device. Responses are sent from the balance each time a command is received as a response to the command. The commands that make up the communication protocol allow you to obtain information about the status of the balance and ways to influence its operation, for example, they allow you to receive weighing results from the balance, control the display, etc.

Additional WD-4/8 LCD display has been designed to connect PUE C315 indicator. The display is equipp (more)ed with a plastic housing and LED backlight. It is powered from a balance indicator. Features: Automatic baud rate recognition Screen saver

KIT 85 is a density determination kit intended for laboratory balances featuring a weighing pan with (more) ø85 and ø100mm. This stainless steel accessory allows determining density of: solids (including granulates); liquids. KIT 85 features an additional set of weighing pans for testing granulate of density higher, and lower than 1 g/cm3.

THE TOP MODEL OF THE 5 SERIES Ideal for laboratories requiring precise sample temperature control an (more)d maximum reproducibility. The AREX 5 Digital magnetic stirrer is a beautiful instrument with a dual digital display for thermoregulating samples with an accuracy of ± 1.0 °C. Thanks to the VTF system then, it will be possible to achieve an accuracy of ± 0.5°C. Pt100 and Pt1000 probes are also available as an option. RESISTANCE, SAFETY AND PERFORMANCE The plate of the AREX 5 Digital Velp model is IP42 certified and is made of aluminum alloy coated with a ceramic layer, which guarantees protection from scratches and chemical agents, making it very resistant and easy to clean. It is therefore preferred in laboratories where acids, bases and solvents are used. Safety circuits and overtemperature protection guarantee complete protection for the operators. Two light indicators inform the user when the heating function is active. Even when the instrument is switched off, a safety message ('HOT') remains on the display until the plate temperature drops below 50°C. A further alarm will detect the presence of the probe. The plate structure and the insulating disc protect the internal parts and ensure high resistance to the most demanding laboratory environments and applications, for example when working with cold fluids (below 0°C). AREX 5 is designed to last over time and like most Velp products it is guaranteed for 3 years. THERMOREGULATION When a temperature probe is connected, it is possible to choose 2 different thermoregulation modes to satisfy all laboratory needs: - FAST: the set temperature is reached quickly - FINE: the set temperature is reached more slowly, minimizing the overshoot SHAKING AREX 5 is equipped with a powerful brushless motor for daily applications, being able to agitate up to 20 liters (H2O). It is also equipped with SpeedServo™ technology, which allows the speed to be kept constant even when the viscosity of the sample varies. The combination of the powerful brushless motor and the strong magnetic coupling ensure homogeneous stirring, even in the peripheral areas of the plate, guaranteeing a constant speed in all positions. DESIGN The compact, innovative and attractive design offers comfort and safety both during benchtop applications and in laboratory fume cupboards. The inclination of the front panel is designed to optimize the user experience and the bright LED display allows easy reading and constant monitoring of the temperature and stirring speed. APPLICATIONS AREX 5 is the ideal solution for temperature sensitive applications in many industrial, research and academic laboratory sectors. THE AREX DIGITAL PANEL: BEAUTIFUL AND SIMPLE TO USE By turning the left knob it will be possible to adjust the temperature up to 310°C, while with the right one it will be possible to set the stirring speed from 50 to 1500 rpm. COMPARISON TABLE OF THE NEW VELP SERIES 5 MAGNETIC STIRRERS:

VACUUBRAND MV 2 NT Diaphragm Pump Ultimate Vacuum 0.5 mbar Max. pumping speed at 60 Hz 1.4 cfm Num (more)ber of Heads/Stages 4/4 Features - Outstanding chemical resistance and superior vapor tolerance - Exceptionally high performance even at low vacuum - Compact design - Whisper quiet and very low vibration - Long diaphragm life, maintenance-free drive system Four-stage diaphragm pumps are an excellent solution for continuous, oil-free pumping of gases when the need is to reach fractional millibar ultimate vacuums. All parts in contact with pumped vapors or gases are made of aluminum, stainless steel and carefully selected plastics suitable for a wide range of non-corrosive applications. The new NT-series pumps provide whisper-quiet and ultra-low-vibration operation, high leak-tightness and improved vacuum. The highly flexible, fabric-reinforced double diaphragm made of FKM offers extended operating life. Four-stage diaphragm pumps are an excellent choice for continuous, contamination-free evacuation and pumping of non-aggressive gases under the very high vacuum demands of applications in physics and analytics. Due to the outstanding ultimate vacuum, these pumps are often used as alternative to rotary vane pumps. A typical application is the use as backing pump for turbomolecular drag pumps.INCLUDED: The VACUUBRAND MV 2 NT Diaphragm Pump includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Scilogex MicroPette Pipettor, 10-100µl The Scilogex MicroPette Pipettor, 10-100µl has a volume range (more) of 10-100µl with an accuracy of 0.80/1.00/3.00±%. INCLUDED: The Scilogex MicroPette Pipettor, 10-100µl includes: - Calibration/Opening Tool - Grease - Tip - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Boekel Scientific FS100 XL Platelet Incubator w/built in Agitator The Boekel Scientific FS100 is a f (more)loor standing platelet incubator / agitation system. The unit has 25 shelves and can hold up to 100 units of platelets. Boekel Scientific pioneered the use of thermoelectric heating and cooling for the storage of platelets and has implemented this technology on the FS100. Thermoelectric heating and cooling is efficient and does not require refrigerant gas or compressors, which can be prone to failure. The system has a 7” industrial color touch screen and an alarm indicator light that can be viewed from across a large room. The large indicator light is illuminated when the unit is powered on and blinks when the unit enters an alarm condition. This indicator light allows for quick identification of a unit that requires attention. Boekel platelet incubation / agitation systems have an advanced control system with many automated processes including high low temperature alarm testing, unit temperature calibration and the patented inventory management system. The inventory management allows for platelet expiration tracking using color coded icons. This easy-to-use tool was designed to decrease loss of platelets due to time expiration. These systems also have an integrated thermal printer for printing temperature and event reports. This service free device replaces the old-style chart recorders that are difficult to read and require monthly maintenance. The control systems also have a USB port for downloading unit data and an ethernet port for connection the equipment to a network. All systems also have a battery backup system that will log data in the event of a power failure. The FS100 has smooth rolling, lockable casters making it easily to install and relocatable. If a blood bank uses a secondary temperature monitoring system they can easily attach a probe using the FS100 probe port and mounting hardware. Features: - 25 Removable shelves to store up to 100 units of platelets - Massive 7” industrial touch screen with intuitive icons - Gas-less/Compressor less heating and cooling design - Locking Casters for easy unit placement - Patented Inventory Management System to decrease wastage - Alarm and Standard Operation Indicator Light - Onboard thermal printer for keeping records of temperature data - Downloadable event log - Battery backup in the event of a power failure - Two-year Warranty - Extended Warranty Available Click Here to View Product Video INCLUDED: The Boekel Scientific FS100 XL Platelet Incubator w/built in Agitator includes: - 25 Removable shelves to store up to 100 units of platelets - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW