Weighing Table

Dimensions: 1740 x 800 x 960 mm

Radwag WLC 6/A2/C/2 Precision Balance. Weighing range from 5g to 6kg. Readability 0.1 g. Linearity ± (more) 0.2 g. Plate size 195x195 mm. Self-calibration. 2 × RS232, USB-A, USB-B connectivity. Backlit LCD screen. Optional legal metrology (M) Class II (+ € 40). Radwag WLC precision balances are dedicated to very fast and accurate weighing in the laboratory and industrial environment. They can work in places far from a power supply source since they are equipped with an internal accumulator (230V) and a standard RS 232 interface. It has a stainless steel pan and a backlit LCD screen that guarantees the best legibility of the weighing result. Communication interfaces: 2 × RS232, USB type A, USB type B allow cooperation with external devices such as a printer, a computer, a pen drive, an additional screen. The scales also have a real time clock and an ALIBI weighing memory.

The antivibration table has been designed to eliminate ground vibrations during the operation of aut (more)omatic feeder. It consists of two separate constructions: the outer, designed to isolate the working part, and the inner. The working part includes a table and a stone separated by a vibration damper. The table features a stone top (located on the left side of the table) and adjustable feet with protective rubber tips, facilitating table levelling on uneven surfaces. The structure of the SAL/T version is made of powder-coated steel, and the top is made of HPL board.

The antivibration table has been designed to eliminate floor vibrations during the operation of PLUS (more) series laboratory balances. It consists of two separate constructions: the outer, designed to isolate the working part, and the inner. The working part includes a table and a stone separated by a vibration damper. The table features a stone top (located at the centre of the table) and adjustable feet with protective rubber tips, facilitating table levelling on uneven surfaces. The structure and the tabletop are made of acid-resistant stainless steel.

The dual weighing workstation is intended for microbalances and analytical balances. It is equipped  (more)with two lockers for a computer and an emergency UPS power supply or a power strip. The workstation also has a sliding shelf for a keyboard and a mouse. It additionally features ventilation openings and a base for a monitor. The separated anti-vibration part provides protection against vibration, and the feet feature rubber tips to facilitate table levelling on uneven floors. The structure of the workstation is made of steel, the two tabletops that allow two balances to be used simultaneously are made of stone, and the working part of the tables is made of MDF.

If you buy a High Resolution Scale HY10 by July 31, 2024, you will receive each of these products al (more)ong with a FREE lifetime license for the Workflow Module. Fast and Stable Measurement The scale displays the final result even in one second. High Maximum Capacity and Accuracy in a Single Device On the large weighing pan of an HRP scale, you can weigh a load of 150 kg with a readability of 1 g and impressive repeatability. Minimum Eccentricity Error Over the Entire Range On the HRP scales, you can also weigh irregularly shaped items with a centre of gravity significantly displaced from the weighing pan axis. Parameter Stability Over Time and After Transport Retain the correct metrological parameters even after prolonged, intensive use and transport of the scale due to its resistant and robust mechanical design. Weighing Pan Dimensions Adapted to the Accuracy of the Balance Weigh with the highest readability of 0.02 g on the 360 x 280 mm weighing pan and with a readability of 20 g on the 1,250 x 1,000 mm weighing pan. Maximum Robustness IP 67 platforms with additional sealing elements to protect against dust, dirt and moisture and can be cleaned with a pressure washer. New, lmproved MONOBLOCK® The new, taller and larger MONOBLOCK® enables the best repeatability and speed in its class of weighing platforms. New HRP Platform HY10 terminal is a constructional component of industrial multifunctional load cell scales, it connects with RADWAG high resolution platforms and weighing modules. Readability of 0.01 g at 10 kg maximum capacity and 0,2 g at 120 kg maximum capacity. Repeatability down to 0.01. Higher resistance to changes in ambient conditions. The platforms are so robust that they can be cleaned with a pressure washer. Transport protection that stiffens the structure during transport, eliminating any unwanted stresses. Platforms with a maximum capacity starting at 300 kg include transport handles, which makes them easy to move. Platforms of IP 67. PUE HY10 Terminal HY10 terminal is a constructional component of industrial multifunctional load cell scales, it connects with RADWAG high resolution platforms and weighing modules. High Level of Protection HRP scales have additional sealing elements to protect them from dust, dirt and moisture. This allows them to be cleaned with a pressure washer.

The BBP300 +4ºC & -35ºC combination refrigerator / freezer offers 2x 286 liters of safe and reliable (more) storage capacity. The inner fans with forced air circulation ensure superior temperature uniformity and fast temperature recovery. The upper chamber standard comes with a double layer glass door where the bottom compartment comes with a stainless steel door. Both chambers have their own independent cooling system, controller and power. The BBP300 is the combination blood & plasma system and comes with 2 x 3 stainless steel roll-out drawers and standard 2 chart recorders. Capacity: 2x 286 l Doors: upper -1 glass door (double layer), bottom – 1 stainless steel door for both parts Air circulation: forced air circulation by inner fan Defrost: fully automatic defrost cycle Temperature range: +4ºC upper part / -35ºC lower part Temperature precision: ± 0.5ºC Temperature stability: ± 1ºC Temperature uniformity: ± 2ºC Microprocessor: adjustable set-point, high alarm, low alarm, door alarm, 2 separate and independent (audible, visual and remote alarm) Chart recorder: 2x 7- day chart recorder, factory installed in top panel Cabinet material: stainless steel inside and outside Dimensions (WxDxH): 710 x 800 x 1985 mm Internal dimensions (WxDxH): 590 x 675 x 590 mm (x 2 compartments) Drawers (WxDxH): 490 x 610 x 150 mm Weight: 190 kg

This Olympus Fluoview FV1000 System was removed from a university lab where it was surplus to requir (more)ements. Included are; 1x Olympus FluoviewModel FV1000 The unit is in good cosmetic condition, but the power cables were missing so it has not been tested. The included PC powers up and has Olympus FV10-ASW Version 01.06.00.13 installed. 1x Olympus Transmitted Light Detector:Model FV10-TDThe unit is in good cosmetic condition. 1x Olympus Control Box:Model IX2 UCBThe unit powers on and is in good cosmetic condition. 1x Olympus Power Supply:Model FV10-PSUThe unit powers on and is in good cosmetic condition. 1x FV10-PSU Key:Model 1201 The unit is in good cosmetic condition. 1x Olympus Hand-switch:Model U-HSTR2The item powers on and is in a reasonable, used cosmetic condition. 1x Olympus Laser Diode Interface Controller:Model FV10-LDIFThe unit is in good cosmetic condition. The PSU is missing. 1x Olympus Power Supply:Model U-RFL-T200Life Time: 3667 hoursThe unit powers on and is in good cosmetic condition. It is not known if the Burner has been replaced after 200 hours. 1x Olympus Mercury Light Source:Model U-LH100GThe unit powers on and is in good cosmetic condition. The Lamp is working. 1x Olympus Light Source StandModel FV10-FIRThe unit is in good cosmetic condition. There are some scuffs and scratches from general use. 1x Olympus Power Supply:Model FV5-LDPSURunning hours: 79335.3 The unit powers on and is in good cosmetic condition.I was unable to connect the head to the power supply as there is no cable that comes with the two units. 1x FV5-LDPSU Olympus Power Supply Key:Model 1201The unit is snapped. However, FV10-PSU key is the same model and fits the barrel of the FV5-LDPSU Olympus power supply. 1x Olympus Laser HeadModel LD405The unit is in good cosmetic condition.I was unable to connect the head to the power supply as there is no cable that comes with the two units, I could not test whether the laser head is responsive to the power supply. 1x IW-R3000N Rack Mountable Server ChassisThe unit powers on and is in good cosmetic condition. Accessories: 1x Olympus objective correction capModel CAP-G0.5 ± 0.5The unit is in good cosmetic condition 1x Olympus Laser safety shutterModel F10-SHAUXThe unit is in good cosmetic condition. 1x Olympus Goose neck fibre optic light pipesModel LGS3F1200UVThe unit is in good cosmetic condition. Spacers: 2x L3cm xW3cm xH0.5cm 2x L4cm x W4cm x H0.5cm The units are in good cosmetic condition. Misc Accessories: 1x IW-R3000N Rack Mountable Server Chassis User manual V2.11x Microsoft Windows 2000 XP professional Inst/uninst CD1x Belkin Serial Adaptor 1x RCA Phono male to male cable (sealed)1x SATA Cable (C13214-001 FOXCON 0550)1x 9 PIN S -Video to 3 RCA RGB TV HDTV adaptor cable 1x ATX 4 Pin Male to 8 Pin Female EPS power cable cord adaptor1x RCA Female to mini DIN 8-PIN connector (sealed)1x VGA to DVI connector (sealed) Installation discs:2x Belkin USB Adaptor Installation1x Intel Express installer1x Sapphire installation driver 1x mini disc

High precision measurements The 200 g class E2 mass standard is a precision metrology tool, ideal fo (more)r calibrating high-precision balances used in metrology, pharmaceutical, chemical laboratories and other research and industrial institutions. Product Features The ergonomic, cylindrical shape ensures ease of use and precise placement of the standard on the weighing platforms. Made from the best materials, it guarantees stability and resistance to changes in environmental conditions.

Intended use: Operation of professional MWLH electromagnetic high resolution modules is based on an  (more)electromagnetic digital converter. The MWLH series is designed to be incorporated into customer's weighing systems requiring high IP rate, great weighing accuracy and high measurement speed. Brand new, compact design favours unlimited module's adaptation capabilities. The module may be installed on technological lines thus ensuring quick and precise measurement in challenging industrial environment. Design: MWMH Weighing Module features integrated stainless steel housing with degree of protection classified as IP 65. It is connected to signal cables via quick coupling. The module base features four holes located in its corners allowing to fix the module to the base using M8 screws. MWMH Weighing Module comprises aluminium, painted plate with four threaded M6 holes, useful for fixing the weighing pan. Features: Brand new construction of the electromagnetic mechanism housed in a stainless steel casing (IP65), Reading unit of 0,1 g, Ease of adaptation to required usage area, Cooperation with HY terminal, Interfaces: RS 232, RS 485, Ethernet, 2xIN i 2xOUT, Profibus (option).

Motic BA210 LED Digital Compound Microscope Magnification Range 4x to 100x Optical System Colour Cor (more)rected Infinity (CCIS) Illumination 3W LED Features - Binocular head Siedentopf type, 30º inclined with Built-in digital camera CMOS 1/2” chip - 3MP - 2048x1536 pixels with USB 2.0 output - Widefield high eyepoint eyepieces N-WF10X/20mm with diopter adjustment - Reversed quadruple revolving nosepiece - CCIS EF-N Plan Achromatic objectives EF-N PL 4X, 10X, 40X S, 100X S Oil - Built in low position coaxial mechanical stage (Right-hand control) - Focusable Abbe condenser N.A. 0.90/1.25 with iris diaphragm and slot - Coaxial coarse and fine focusing system with tension adjustment - Manufactured in accordance with European RoHS Standard to avoid contact with lead - Anti-fungus treatment applied to all parts of the microscope for humidity protection - Switching power supply for use worldwide (100-240V) The new Motic BA310 Digital Pro Upright Microscope is designed for the rigors of daily routine work specifically for diverse applications in Hematology and Cytology. The BA310 Digital is a version of the BA310 featuring a built-in 3.0MP sensor. The demands placed on any routine microscope for daily work needs careful focus on every microscope detail. The new BA310 series features a powerful adjustable light source to meet both delicate and detailed lighting requirements for all sample types while the fully featured Koehler illumination helps in highlighting even the weakest-stained specimens. New CCIS EF-N Plan Achromat objectives provide optimal image contrast through newly designed multi-layer lens coatings. INCLUDED: The Motic BA210 LED Digital Compound Microscope includes: - Widefield high eyepoint eyepiece N-WF10X / 20mm with diopter adjustment - Built-in Digital Live Hi-Res Imaging Chip, 2592 x 1944 Resolution USB 2.0 - Reversed quadruple revolving nosepiece - CCIS EC Plan Achromat objectives 4x, 10x, 40x S, 100x S-oil - Built in low position coaxial mechanical stage (Right-hand control) - Focusable Abbe condenser N.A. 1.25 with iris diaphragm and slot - 45mm blue filter, immersion oil (5mL), power cord, allen hexagonal key, vinyl dust cover - Built in illumination 3W LED with intensity control - Motic Images Plus 3.0 for PC and MAC - Calibration Slide - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty