Radwag SAL/T Steel Antivibration Table for PA-04/H Automatic Feeder

Dimensions (HxWxD): 780 x 900 x 600 mm

Dimensions: 1200 x 400 x 920 mm

TMC Micro-G 63-530 Antivibration Table Lab This item was removed from a university where it was surp (more)lus to requirement. It is in good cosmetic condition, we are unable to test it further at our facility.

The antivibration table has been designed to eliminate floor vibrations during the operation of indu (more)strial scales. It consists of two separate constructions: the outer, designed to isolate the working part, and the inner. The working part includes a table and a stone separated by a vibration damper. The table features a large stone top and adjustable feet with protective rubber tips, facilitating table levelling on uneven surfaces. The structure and the tabletop are made of acid-resistant stainless steel.

The antivibration table has been designed to eliminate ground vibrations during the operation of aut (more)omatic feeder. It consists of two separate constructions: the outer, designed to isolate the working part, and the inner. The working part includes a table and a stone separated by a vibration damper. The table features a stone top (located on the left side of the table) and adjustable feet with protective rubber tips, facilitating table levelling on uneven surfaces. The structure of the SAL/T version is made of powder-coated steel, and the top is made of HPL board.

If you buy a High Resolution Scale HY10 by July 31, 2024, you will receive each of these products al (more)ong with a FREE lifetime license for the Workflow Module. Fast and Stable Measurement The scale displays the final result even in one second. High Maximum Capacity and Accuracy in a Single Device On the large weighing pan of an HRP scale, you can weigh a load of 150 kg with a readability of 1 g and impressive repeatability. Minimum Eccentricity Error Over the Entire Range On the HRP scales, you can also weigh irregularly shaped items with a centre of gravity significantly displaced from the weighing pan axis. Parameter Stability Over Time and After Transport Retain the correct metrological parameters even after prolonged, intensive use and transport of the scale due to its resistant and robust mechanical design. Weighing Pan Dimensions Adapted to the Accuracy of the Balance Weigh with the highest readability of 0.02 g on the 360 x 280 mm weighing pan and with a readability of 20 g on the 1,250 x 1,000 mm weighing pan. Maximum Robustness IP 67 platforms with additional sealing elements to protect against dust, dirt and moisture and can be cleaned with a pressure washer. New, lmproved MONOBLOCK® The new, taller and larger MONOBLOCK® enables the best repeatability and speed in its class of weighing platforms. New HRP Platform HY10 terminal is a constructional component of industrial multifunctional load cell scales, it connects with RADWAG high resolution platforms and weighing modules. Readability of 0.01 g at 10 kg maximum capacity and 0,2 g at 120 kg maximum capacity. Repeatability down to 0.01. Higher resistance to changes in ambient conditions. The platforms are so robust that they can be cleaned with a pressure washer. Transport protection that stiffens the structure during transport, eliminating any unwanted stresses. Platforms with a maximum capacity starting at 300 kg include transport handles, which makes them easy to move. Platforms of IP 67. PUE HY10 Terminal HY10 terminal is a constructional component of industrial multifunctional load cell scales, it connects with RADWAG high resolution platforms and weighing modules. High Level of Protection HRP scales have additional sealing elements to protect them from dust, dirt and moisture. This allows them to be cleaned with a pressure washer.

Colorimeter to test % transmittance in a sample.

Applied Biosciences 7900 HT Fast Real-Time PCR Complete System Lab This item was removed from a univ (more)ersity where it was surplus to requirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility. Includes:- 16A 1Phase cable

Ohaus SHHD1619AL Heavy Duty ShakerThe OhausSHHD1619AL 16 kg Capacity Analog Heavy Duty Orbital Shake (more)r is designed for awide range of applications that require basic shaking control. Shaker providesreproducible motion that is evenly distributed throughout the entire surface ofthe tray. With loadcapacities from 35 lbs and over 70 accessory options and with microprocessorcontrol to provide variable speed and consistent shaking, while ramping to theset speed. Microprocessor displays the last set-point and will restart if poweris interrupted. Built-in tray and non-slip rubber mat included with theSHHD1619AL. Touchpadcontrols with independent LEDs for speed/time allow operator to view allsettings at once. Timer displays elapsed time or when programmed to a set time,will turn off when time reaches zero.Speed rampingfeature slowly increases the speed to desired setpoint to avoid splashing. Theload sensor detects unbalanced conditions and automatically reduces rpm to asafe speed to protect samples.Click Here to View Product Video INCLUDED: The Ohaus SHHD1619AL Heavy Duty Shaker includes: - Non-Skid Rubber Mat - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty Ohaus SHHD1619AL Heavy Duty Shaker Specifications Speed Range25 to 500 rpmTimer1 minute to 120 minutesOrbit19 mm (0.75")Maximum Weight Capacity35 lbs (16 kg)Tray MaterialAluminumTray Dimensions (L × W)11 × 13" (27.9 × 33 cm)Overall Dimensions (L × W × H)16.3 × 14.0 × 5.9" (41.3 × 35.5 × 14.9 cm)Ship Weight49 lbs (22.2 kg)ControlAnalogPower120V, 5A, 50/60 HzPower Consumption75 WSafety CertificationTUVWorking Environment32° F - 104° F, 80%RH, non-condensing (0° C - 40° C, 80%RH, non-condensing)CalibrationSpeed calibrationDrive SystemBrushless DC Motor;Triple EccentricSpeed Accuracy±1 rpm, Above 100 rpm ±1% of set speedComparison of ModelsSpecificationOhaus SHHD1619ALOhaus SHHD1619DGOhaus SHHD2325ALOhaus SHHD2325DGOhaus SHHD4525DGOhaus SHHD4550DGOhaus SHHD6825DGOhaus SHHD6850DGSpeed Range (rpm)25 to 50015 to 50025 to 50025 to 50015 to 50015 to 30015 to 50015 to 300Timer (Minutes)1 to 1201 to 160 hours1 to 1201 to 1201 to 160 hours1 to 160 hours1 to 160 hours1 to 160 hoursOrbit (mm)19 (0.75")19 (0.75")25 (1")25 (1")25 (1")51 (2")25 (1")51 (2")Maximum Weight Capacity (lbs/kg)35 lbs (16 kg)35 lbs (16 kg)50 lbs (22.7 kg)50 lbs (22.7 kg)100 lbs (45.4 kg)100 lbs (45.4 kg)150 lbs (68 kg)150 lbs (68 kg)Tray Dimensions (L x W)11 x 13"11 x 13"18 x 24"18 x 24"24 x 24"24 x 24"24 x 36"24 x 36"ControlAnalogDigitalAnalogDigitalDigitalDigitalDigitalDigitalPower120V, 5A, 50/60 Hz120V, 5A, 50/60 Hz120V, 5A, 50/60 Hz120V, 5A, 50/60 Hz120V, 5A, 50/60 Hz120V, 5A, 50/60 Hz120V, 5A, 50/60 Hz120V, 5A, 50/60 HzPower Consumption (W)7575757580808080.comparison-table tr td:nth-child(2) { background-color: #fffacd; }