Radwag SAL/STONE/H Stainless Steel Antivibration Table

Dimensions (HxWxD): 950 x 400 x 400 mm

The antivibration table has been designed to eliminate ground vibrations during the operation of aut (more)omatic feeder. It consists of two separate constructions: the outer, designed to isolate the working part, and the inner. The working part includes a table and a stone separated by a vibration damper. The table features a stone top (located on the left side of the table) and adjustable feet with protective rubber tips, facilitating table levelling on uneven surfaces. The structure of the SAL/T version is made of powder-coated steel, and the top is made of HPL board.

The antivibration table has been designed to eliminate ground vibrations during the operation of lab (more)oratory equipment such as microbalances, analytical balances and others. It consists of two separate constructions: the outer, designed to isolate the working part, and the inner. The working part includes a table and a stone separated by a vibration damper. The table features a stone top (located at the centre of the table) and adjustable feet with protective rubber tips, facilitating table levelling on uneven surfaces. The structure of the table is made of powder-coated steel, and the tabletop is made of MDF.

This antivibration table is intended for mass comparators. It is made of stainless steel and a massi (more)ve granite plate placed on top. The table has a safety feature to prevent accidental slipping of the stone, as well as vibration dampening rubbers. Due to low construction, the need to lift large masses to a considerable height is reduced.

The professional weighing workstation is intended for microbalances and analytical balances. It is e (more)quipped with two lockers for a computer and an emergency UPS power supply or a power strip. The workstation also has a sliding shelf for a keyboard and a mouse. It additionally features ventilation openings and a base for a monitor. The separated anti-vibration part provides protection against vibration, and the feet feature rubber tips to facilitate table levelling on uneven floors. The structure of the workstation is made of steel, the top of stone, and the working part of MDF.

If you buy a High Resolution Scale HY10 by July 31, 2024, you will receive each of these products al (more)ong with a FREE lifetime license for the Workflow Module. Fast and Stable Measurement The scale displays the final result even in one second. High Maximum Capacity and Accuracy in a Single Device On the large weighing pan of an HRP scale, you can weigh a load of 150 kg with a readability of 1 g and impressive repeatability. Minimum Eccentricity Error Over the Entire Range On the HRP scales, you can also weigh irregularly shaped items with a centre of gravity significantly displaced from the weighing pan axis. Parameter Stability Over Time and After Transport Retain the correct metrological parameters even after prolonged, intensive use and transport of the scale due to its resistant and robust mechanical design. Weighing Pan Dimensions Adapted to the Accuracy of the Balance Weigh with the highest readability of 0.02 g on the 360 x 280 mm weighing pan and with a readability of 20 g on the 1,250 x 1,000 mm weighing pan. Maximum Robustness IP 67 platforms with additional sealing elements to protect against dust, dirt and moisture and can be cleaned with a pressure washer. New, lmproved MONOBLOCK® The new, taller and larger MONOBLOCK® enables the best repeatability and speed in its class of weighing platforms. New HRP Platform HY10 terminal is a constructional component of industrial multifunctional load cell scales, it connects with RADWAG high resolution platforms and weighing modules. Readability of 0.01 g at 10 kg maximum capacity and 0,2 g at 120 kg maximum capacity. Repeatability down to 0.01. Higher resistance to changes in ambient conditions. The platforms are so robust that they can be cleaned with a pressure washer. Transport protection that stiffens the structure during transport, eliminating any unwanted stresses. Platforms with a maximum capacity starting at 300 kg include transport handles, which makes them easy to move. Platforms of IP 67. PUE HY10 Terminal HY10 terminal is a constructional component of industrial multifunctional load cell scales, it connects with RADWAG high resolution platforms and weighing modules. High Level of Protection HRP scales have additional sealing elements to protect them from dust, dirt and moisture. This allows them to be cleaned with a pressure washer.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

System consisting of: Gilson GX-281 sample robot 2 Gilson 6 position valves 2 Gilson 306 pump Gilson (more) 322 pump

Lot of 29 Hollow Cathode Lamps - Perkin Elmer - Unicam - S&J Juniper Lab These were removed from (more) a university lab where they were surplus to requirements. The units have not been tested but have been used previously. Included are; 1 x Perkin-Elmer Hollow Cathode Lamp - Element: K-Na1 x Cobalt Hollow Cathode Lamp - Element: IRON.Fe.1 x Pye Unicam Hollow Cathode Lamp - Element: D21 x Activion Hollow Cathode Lamp - Element: Palladium Pd1 x Unicam Hollow Cathode Lamp - Element: Pb1 x Unicam Hollow Cathode Lamp - Element: Zn1 x Unicam Hollow Cathode Lamp - Element: Fe1 x Unicam Hollow Cathode Lamp - Element: Cu1 x Unicam Hollow Cathode Lamp - Element: Ni1 x Unicam Hollow Cathode Lamp - Element: B1 x Unicam Hollow Cathode Lamp - Element: Mn1 x S&J JUNIPER & CO Hollow Cathode Lamp - Element: VANADIUM V Wavelength: 318.51 x S&J JUNIPER & CO Hollow Cathode Lamp - Element: COPPER Cu Wavelength: 324.81 x S&J JUNIPER & CO Hollow Cathode Lamp - Element: CADMIUM Cd Wavelength: 228.81 x S&J JUNIPER & CO Hollow Cathode Lamp - Element: ALUMINIUM AL. Wavelength: 396.2/309.31 x S&J JUNIPER & CO Hollow Cathode Lamp - Element: PALLADIUM.Pd. Wavelength: 247.6 nm2 x S&J JUNIPER & CO Hollow Cathode Lamp - Element: LEAD.Pb. Wavelength: 217.0 nm1 x  S&J JUNIPER & CO Hollow Cathode Lamp - Element: ZIRCONIUM.2r. Wavelength: 360.1 nm1 x  S&J JUNIPER & CO Hollow Cathode Lamp - Element: PLATINUM Pt. Wavelength: 265.91 x S&J JUNIPER & CO Hollow Cathode Lamp - Element: CALCIUM.Ca. Wavelength: 422.71 x S&J JUNIPER & CO Hollow Cathode Lamp - Element: TITANIUM Ti. Wavelength: 364.3 nm1 x S&J JUNIPER & CO Hollow Cathode Lamp - Element: SILVER Ag Wavelength: 328.11 x S&J JUNIPER & CO Hollow Cathode Lamp - Element: MAGANESE.Mn. Wavelength: 279.5 nm.1 x S&J JUNIPER & CO Hollow Cathode Lamp - Element: TELLURIUM Te. Wavelength: 214.31 x S&J JUNIPER & CO Hollow Cathode Lamp - Element: RHODIUM.Rh. Wavelength: 343.5 nm.1 x S&J JUNIPER & CO Hollow Cathode Lamp - Element: ZINC Zn Wavelength: 213.91 x S&J JUNIPER & CO Hollow Cathode Lamp - Element: Na/K. Wavelength: 589.0/766.51 x S&J JUNIPER & CO Hollow Cathode Lamp - Element: TUNGSTEN W Wavelength: 255.1

C315 Load Cell Platform Scale Precision weight determination in light industrial environments at an  (more)even lighter price. Wherever fast weighing is important. The C315 scale is equipped with the PUE C315 weighing terminal with a backlit LCD display. This long-established technology guarantees reliability and low power consumption, and most importantly, a very long display life. Don’t worry about robustness The construction of the scale is made of powder-coated steel with a stainless steel weighing pan. This guarantees you work for many years, and what’s more, powder-coated steel is more environmentally friendly than traditional painting methods. You will not run out of energy The scale has two power sources: mains and rechargeable. Thanks to its well-designed electronics and LCD display, the device consumes only 5W of energy, which will allow you to work for up to 8 hours without mains power. You get battery power as standard.

SCILOGEX DILVAC Dry-Ice Maker, c/w Pressure Hose and Pressure Gauge, USA versionProduct Description  (more)The SCILOGEX Portable Dry-Ice Maker is the fastest way of providing a block of Dry-Ice for your needs. It is compact and lightweight, requires no electrical power and is safe and simple to use. Most importantly it is there to give you immediate access to Dry-Ice (-109.3°F) when you need it. The economy of having Dry-Ice 'on-tap' can provide considerable financial savings. The SCILOGEX Portable Dry-Ice Maker produces a block (not slush!) of approximately 2.2Lbs (1KG) in weight in about 1 minute. Yield from a 75 lbs liquid cylinder - 5 to 6 blocks at room temperature. (Yield can appreciably increase at lower ambient temperatures, i.e. @ 41°F approximately 1/3 more blocks may be produced.) The dry-ice maker comes complete with a steel hose ready to connect to a cylinder of compressed liquid CO2 with an internal siphon and standard CGA-320 valve (Note for international orders, we can supply BS341 No. 8 valve) Full instructions provided. (Note: We do not sell/rent gas cylinders/tanks, which can be obtained from local gas dealers or welding supply stores.)Dimensions of Dry-Ice Maker - 8.9" Long x 6.3" Wide x 6.3" High Dimensions of block produced - 7.0" Long x 3.2" Wide x 4.3" High Click Here to View Product Video INCLUDED: The SCILOGEX DILVAC Dry-Ice Maker, c/w Pressure Hose and Pressure Gauge, USA version includes: - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty