Radwag PL/4/300/H6 Platform

Character communication protocol is designed for communication between RADWAG balance and external d (more)evice via RS232, Ethernet or Wi-Fi* interfaces. The protocol consists of commands sent from the external device to the balance and responses sent from the balance to the device. Responses are sent from the balance each time a command is received as a response to the command. The commands that make up the communication protocol allow you to obtain information about the status of the balance and ways to influence its operation, for example, they allow you to receive weighing results from the balance, control the display, etc.

AP2-1 Current Loop unit 4–20 mA has been designed to convert digital value of mass to analog v (more)alue. It is a unit of passive type, i.e. it requires to be supplied with power from an external source, of 24 VDC voltage value. AP2-1 Current Loop unit indicates mass as: absolute value (no sign), positive values exclusively, mass value with sign. The AP2-1 is intended for cooperation mainly with scales operated via PUE C315 and PUE 7.1 indicators. It is housed in a plastic casing, and powered with power supply 230V/5VDC. The AP2-1 and the power supply are sold as a set. The current circuit is led through 1.7-meter-long cable.

Ethernet cable (RJ45 connector). Cable length: 15 m Compatible with: Scales operated via PUE 5.15 (5 (more).19) terminal PUE 5.15 (5.19) terminal

Ethernet cable with angle connector: scale (HRP, MWSH, MWLH) – terminal (HY10, PUE5). Cable le (more)ngth: 5 m Compatible with: HRP platform MWSH weighing module MWLH weighing module

Waterproof stainless steel platform We provide you with waterproof stainless steel platforms with re (more)adability [d] from 1 g to 100 g and maximum capacity [Max] from 3 kg to 300 kg. The platforms are rectangular in 150 x 200 mm, 250 x 300 mm or 400 x 600 mm or square in 410 x 410 mm, 800 x 800 mm, 500 x 500 mm, 600 x 600 mm or 800 x 800 mm. Use the potential Our platforms can work with one of six weighing terminals to choose from: PUE H315, PUE C315, PUE 7.1, PUE HX7, PUE HY10 and PUE 5. The power of steel The use of stainless steel for both the pan and the frame guarantees you a long life for the platform. Fearless of its contact with moist objects or accidental splashes. The entire stainless steel construction translates into a high degree of protection for these platforms: IP 68.

Additional LCD display in plastic housing and on a stand. The display enables presentation of the we (more)ighing result in a place distant from the balance workplace. It features an additional information line which allows to display additional messages and data.

LMS 400NP Cooled Incubator This item was removed from a university where it was surplus to requireme (more)nt. The incubator is in excellent cosmetic condition and powers on.However, the compressor did not start up during testing, so the unit is unable to reach its minimum temperature of -10°C. Therefore, it is listed as Spares/Repair. Specifications: - Serial No.: 12425/17PP - Capacity: 450 litres - Internal dimensions: 64 x 55 x 118 cm (l x w x h) - Temperature range: -10°C to 50°C - 4 height adjustable shelves (56 x 60 cm) - Factory set auto defrost system

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Dimensions (WxDxH): 600 x 490 x 600 mm

IKA ICC 150 Lite Pro 9 Open Bath Heating Circulator Working temperature Room Temp. to 150°C Capacity (more) 9 L Flow Rate Max. (0 Bar Back Pressure) 15 l/min Features - High-quality compact immersion circulator designed for efficient operation - PID temperature control ensures precise and reliable performance - Integrated pressure/suction pump for internal and external applications - LED displays for working and safety temperature readings - Optical and acoustic warning functions for added safety - Adjustable safety circuit with a range of 0 to 160°C - Sub-level and over-level protection for secure operation - Flow rate of up to 15 l/min for versatile use - Lightweight and compact design with dimensions of 5.3 x 11.9 x 7.1 in. The IKA ICC 150 Lite Pro 9 Open Bath Heating Circulator is a high-performance immersion circulator designed to deliver precise and reliable temperature control in demanding laboratory applications. Featuring advanced PID technology, it maintains stability to ±0.05 K across a working range from room temperature to 150°C. Its integrated pressure/suction pump supports both internal and external circulation, making it versatile for a variety of uses. Clear LED displays provide real-time readings for working and safety temperatures, while optical and acoustic warnings enhance operational safety. Engineered for convenience and dependability, the ICC 150 Lite Pro 9 includes sub-level and over-level protection to ensure secure operation. The adjustable safety circuit, with a range of 0 to 160°C, provides additional peace of mind. With a flow rate of up to 15 l/min and compact dimensions of 5.3 x 11.9 x 7.1 in., this lightweight unit is designed for efficient operation and easy integration into laboratory workflows. Built to comply with DIN 12876 standards, it’s the ideal solution for precise temperature management. INCLUDED: The IKA ICC 150 Lite Pro 9 Open Bath Heating Circulator includes: - ICC 150 lite Compact Immersion Circulator - IB 9 pro Stainless Steel Bath - BS.ICC lite Small Bath Bridge - Screwdriver for Safety Circuit - Power Cord - Operators Manual - Manufacturer's Documentation - Two Year Manufacturer's Warranty

For sale: Agilent FID EPC module, used with series 7820 G3431-60531   Get in contact if you need oth (more)er EPC models for AGilent GC systems

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW