Radwag PL/4/3000/H8/9 Platform

Stainless Steel HRP EX.H Platform Wherever high readability and precision are important. Wherever go (more)od repeatability in harsh industrial conditions matters. Stainless Steel HRP EX.H Platforms are the ideal solution for any type of industry. Repeatability that cannot be repeated by others Stainless Steel HRP EX.H Platforms have a built-in internal adjustment system. Automatic internal adjustment guarantees the best quality of work and repeatability of results. You save time and avoid the inconvenience of manual adjustment. Hazardous areas are their natural environment Stainless Steel HRP EX.H Platforms have been developed in accordance with Directive 2014/34/EU and the IECEx scheme and, depending on their design, can operate in environments containing explosive gases or dust, classified as zones: 2 and 22. We have equipped them with an intrinsically safe RS 485 communication interface, which allows the platform to work with the PUE HX5.EX weighing meter. To power the platforms, we have dedicated intrinsically safe PM02.EX-1-2 or PM02.EX-2-2 power supplies. Use the potential Stainless Steel HRP EX.H Platforms work with the PUE HX5.EX weighing terminal and are compatible with RADWAG receipt printers. In addition, you will match them with appropriate antivibration tables from our offer, and thus increase the readability of your measurements. The use of stainless steel for the construction of the pan guarantees you a long life of the platform. Fearless of its contact with moist objects or accidental splashing.

RS 232 cable: weighing device (HRP, MWSH, MWLH) – terminal HY10, PUE5. Cable length: 2 m Optio (more)nal cable length: 5 m or 10 m (additional payment) Compatible with: HRP platforms MWSH weighing module MWLH weighing module

The analog output module converts the scale output signal (mass) into an analog signal. The mass val (more)ue is most often represented in the form of a 4-20 mA current signal. Due to the low resolution of the module (several thousand), such a signal is used in automation for processes that do not require high precision. Analog output module is available in: IM01.EX-2 communication module and MW01-A7 weighing module, and for an extra charge in PUE HX7 and PUE HY10 terminals.

Four load cell ramp platforms

Wherever high readability and precision are important. Wherever good repeatability in harsh industri (more)al conditions matters. Waterproof steel platforms are the ideal solution for any type of industry. Use the potential Our platforms can work with one of four weighing terminals to choose from: PUE 7.1, PUE HX7, PUE HY10, PUE 5. They have four load cells, which means that no matter where you put the goods on the pan, the measurement result will always be the same. The power of steel The use of stainless steel for both the pan and the frame guarantees you a long life for the platform. It is not intimidated by contact with moist objects or accidental splashes. The entire construction made of stainless steel translates into a high degree of protection for these platforms: IP 68.

If you buy a High Resolution Scale HY10 by July 31, 2024, you will receive each of these products al (more)ong with a FREE lifetime license for the Workflow Module. Maximum Robustness The HRP high resolution scales are very robust. Their platforms are recognised to have an IP 67 level of protection. They feature additional sealing elements to protect against dust, dirt, and moisture and can thus be cleaned with a pressure washer. 9 advantages The ability to weigh loads up to 150 kg on a large pan with high readability and good repeatability, minimal eccentricity error over the entire range, fast and stable measurement (achievable within 1 second), stability of parameters over time and after transport, and a pan dimension adapted to the scale’s readability – all this is the result of using a measurement system based on improved RADWAG MonoBLOCK technology. The new – taller and larger – RADWAG MonoBLOCK has enabled the best repeatability and speed in the class of high-resolution industrial weighing platforms. Repeatability not repeatable by others Automatic adjustment with an internal weight not only guarantees the best quality of work and repeatability of results, but also saves time and provides comfort. For such industries as pharmaceutical, chemical, food and… HY10.HRP H scales are ideal for industrial conditions where high readability and repeatability of measurement are required, such as in the pharmaceutical, chemical and food industries. The HY10.HRP and HX7.HRP scales whose terminals are made of stainless steel can be used even in the most demanding wet environments. Choose a terminal HRP high-resolution scales can work with one of two industrial terminals: PUE 7.1 and PUE HY10. The PUE 7.1 terminal has: 5.7-inch color resistive display a touch-sensitive keyboard ABS plastic housing IP 43 protection rating communication interfaces: 2xRS232, 2xUSB-A, Ethernet, 4 IN/ 4 OUT, Wi-Fi®, optional additional modules: additional A/D converter module DP6. The PUE HY10 terminal features: 10.1-inch color graphic display touchscreen keyboard stainless steel housing IP 68/69 degree of protection communication interfaces: 2xRS232, 2xUSB-A, Ethernet, 4 IN/ 4 OUT, optional additional modules: Wi-Fi®, RS485, Profibus, Profinet, moduł wyjść analogowych, 12 IN/ 12 OUT. The power of steel The use of stainless steel for weighing pan construction guarantees you a long life for the scale. It is not afraid of contact with moist objects or accidental splashes. The robustness and strength of the design of the HRP high-resolution scales makes it possible to weigh large objects, such as pallets of goods. The stable platform is resistant to vibration, which is important when weighing large objects. Do you need ALIBI? There you have it. ALIBI memory is like a black box of a scale. It records all measurements taken on the device. The ALIBI memory cannot be modified or erased. Use the potential Barcode scanners, receipt printers, label printers or additional displays – thanks to multipurpose software, HY10 scale can work with all of them. You can find all accessories in our regular offer. And if you have questions about compatibility, our experts will help you. Not just weighing But also parts counting, checkweighing, percent weighing, animal weighing, formulations, differential weighing, labelling, peak hold and statistics. The power of HY10’s working mods.

ÄKTAxpress is a liquid chromatography system intended for automated, multi steppurification processe (more)s. The system has been developed and optimized for purificationof Histidine-tagged and Glutathione S-Transferase (GST)-tagged recombinant proteins from clarified or crude cell lysates. ÄKTAxpress supports a number of purification protocols containing up to four chromatography steps, for example, affinity chromatography followed by desalting, ion exchange, and gel filtration. Protocols for purification of both low expressed proteins and well expressed proteins are included. Also protocols supporting purification of double tagged proteins and protocols that can be combined with on-column and off-line (batch) tag cleavage are provided. ÄKTAxpress provides the following features: •Automatic purification of up to four samples in a single run. •Purification protocols containing up to four chromatography steps. •Automated on-column affinity tag removal in the first step of purification protocols starting with an affinity/ion exchange chromatography step. •Purification protocols supporting purification of both well expressed and low expressed proteins, double tagged proteins and proteins that have been cleaved off-line. •Up to 50 mg of protein can be purified per sample. •Up to twelve ÄKTAxpress systems can be run in parallel, controlled from one computer (not included). Different purification protocols can be run simultaneously. •The systems can be placed next to each other or they can stand separately if preferred. Flow rate: 0.1 – 65 mL/min Flow rate accuracy: ±2% or ±0.02 ml/min whichever is greater Flow rate reprocibility: RSD < 0.5% Pressure range: 0 – 30 bar Step gradients (quasi-isocratic mixing) formation conditions: Water based buffers with different concentrations of salts Gradient mmix proportions: 5 – 95% Concentration accuracy: ±2%B Linear gradients conditions: Water based buffers with different concentrations of salts Linearity: ±2%B within 20 – 80%B UV monitor wavelengths: 280 and 254 nm set by lamp position and filter Optical path length: 2 nm Opitcal cell volume: 2 µL Detector cell volume: 30 µL Absorbance range: 0.01 – 5 AU Auto zero range: -0.2 – 2.0 AU Linearity, deviation: < 3% up to 2 AU Static noise, short and long term: < 40 μAU Static drift: ±0.1 mAU/h Conductivity range: 0.01 – 300.00 mS/cm Accuracy: Max. ±2% of full scale calibrated range or ±0.1 mS/cm whichever is greater Reproducibility, short and long term: Max. ±1% or ±5 μS/cm whichever is greater Noise: Max. ±0.5% of full scale calibrated range, typically ±0.1% Response time: Max. 4 s (0–95% of step) Internal volume: 24 μl Dimensions (WxdxH): 250 x 490 x 660 mm Weight: 30 kg

Lauda Eco Gold with Lauda Eco RE 420 Refrigerated Water Bath This was removed from a university lab  (more)where it was surplus to requirements. The unit powers up and is in good working order. (Digital thermometer used for testing not included). It is in good cosmetic condition with minor marks.

Multifunctional scales TMX H is designed to fast and precise determination of mass in industrial con (more)ditions. TMX H Multifunctional scales TMX H comprises terminal PUE 5 and a weighing platform. Labelling system series TMX H is used to print labels for marking weighted goods e.g. in the process of packing. The program can generate standard labels for single goods. Functionality of the software: a function of weight control (weighing control + / -), previewing weighments carried out on weighing terminal as a table of weighments, simplified reporting module allowing the report to be generated, creation of label templates from labels in weighing terminal, identification of goods by using the code EAN-13 and EAN-128, quick search using the range of barcode scanner, the availability of databases: the operators, products, clients, warehouses, tares (packages), etc. The application enables measurements execution and their record into a local database or on the server. Networked terminals allow transmission of the measurements to the parent database installed on the server. The ability to work with a computer program E2R SYSTEM. Terminal types: PUE 5.15R, PUE 5.19R &ndash; resistive touch screen technology. Protection class IP68. High resistance to moisture and dust. In comparison to remaining models, limited brightness and lower resistance to shocks and scratches. Possibility of operation using gloves preventing scratches (latex, material). PUE 5.15IR, PUE 5.19IR &ndash; infrared touch screen technology. Protection class IP68. Very high brightness and readability level. High resistance to moisture and dust. High mechanical resistance, possibility of operation using gloves (made of latex, material or even steel chain). PUE 5.15C, PUE 5.19C &ndash; capacitive touch screen technology. Protection class IP68. High brightness and readability level. High resistance to moisture and dust, good mechanical resistance. Absolute precision of touch detection, sensing multiple points of touch (multi-touch).

HX7 H scale&rsquo;s multi functions Many functions, many interfaces and great robustness (IP66/ IP68 (more)) mean many possibilities for you to use this advanced scale. Tomorrow you can apply it to a different process than today &ndash; that&rsquo;s the multifunctionality. That&rsquo;s the saving! Use the potential Barcode scanners, receipt printers, label printers, external displays, control buttons, light signalling towers and other controlling/ signalling devices &ndash; thanks to multipurpose software, HX7 scale can work with all of them. You can easily connect them thanks to the fact that the balance is equipped with interfaces: RS232, RS485, USB, Ethernet, 4 IN/ 4 OUT. Optionally, the balance can be equipped with 12 IN/ 12 OUT and analog output module. You can find all accessories in our regular offer. And if you have questions about compatibility, our experts will help you. Easy and pleasant Simple and convenient operation with a 7-inch color display. Perfectly visible messages additionally supported by bargraph. The top part of the operation panel features a bar graph consisting of 9 red and green diode fields. The bar graph is a graphic visualisation informing the user on a current net weight of a product presented with reference to the scale range or declared min and max thresholds. The bracket allows the terminal to be placed on any flat horizontal surface or screwed to the wall with adjustable angle. The power of steel The use of stainless steel guarantees you a long life for the scale. It is not afraid of contact with moist objects or accidental splashes. The construction of the scale is made of a stainless steel. This guarantees you work for many years. Not just weighing But also parts counting, dosing, percent weighing and formulations. The power of HX7&rsquo;s working mods. Do you need ALIBI? There you have it. ALIBI memory is like a black box of a scale. It records all measurements taken on the device. The ALIBI memory cannot be modified or erased. Referring to stored weighings you can generate weighing reports, formulation reports and reports on performed control processes. Single weighing is stored in the ALIBI memory as long as it is specified by a Weighing Storage Period (days) parameter.