Radwag HX5.EX-1.4N.300.H2 Stainless Steel Ramp Scale

Ramp scales with stainless steel load cells is widely applied in meat, fish, pharmaceutical, cosmeti (more)c and chemical industry. The H315/4N series is manufactured in complete stainless steel technology with stainless steel indicator PUE H315 series installed on a long cable. Ramp scales is manufactured from OH18N9 stainless steel with IP 68. On special order, it is possible to manufacture ramp scales in upgraded anti-corrosion stainless steel version. Scales is available in dual range version on surcharge.

Ramp scales with stainless steel load cells is widely applied in meat, fish, pharmaceutical, cosmeti (more)c and chemical industry. The H315/4N series is manufactured in complete stainless steel technology with stainless steel indicator PUE H315 series installed on a long cable. Ramp scales is manufactured from OH18N9 stainless steel with IP 68. On special order, it is possible to manufacture ramp scales in upgraded anti-corrosion stainless steel version. Scales is available in dual range version on surcharge.

Ramp scales with stainless steel load cells is widely applied in meat, fish, pharmaceutical, cosmeti (more)c and chemical industry. The H315/4N series is manufactured in complete stainless steel technology with stainless steel indicator PUE H315 series installed on a long cable. Ramp scales is manufactured from OH18N9 stainless steel with IP 68. On special order, it is possible to manufacture ramp scales in upgraded anti-corrosion stainless steel version. Scales is available in dual range version on surcharge.

The HX7.4N H scale is a device controlled by means of the PUE HX7 indicator, and it has been equippe (more)d with a 4-load-cell ramp platform made of stainless steel, AISI 304. This robust design facilitates weighing of heavy loads in humid environment. The ramps enable easy loading and unloading. Indicator with a colour 7” graphic display and a diode bar graph allow to observe visualisation of a current load mass presented in relation to the scale range or declared minimum and maximum thresholds. This makes the operation significantly easier. At the back of the housing there are hermetic connectors of RS232, RS485, USB and Ethernet communication interfaces, plus digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Indicator’s system of information is based on databases (users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety.

The HX7.4N H scale is a device controlled by means of the PUE HX7 indicator, and it has been equippe (more)d with a 4-load-cell ramp platform made of stainless steel, AISI 304. This robust design facilitates weighing of heavy loads in humid environment. The ramps enable easy loading and unloading. Indicator with a colour 7” graphic display and a diode bar graph allow to observe visualisation of a current load mass presented in relation to the scale range or declared minimum and maximum thresholds. This makes the operation significantly easier. At the back of the housing there are hermetic connectors of RS232, RS485, USB and Ethernet communication interfaces, plus digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Indicator’s system of information is based on databases (users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety.

The HX7.4N H scale is a device controlled by means of the PUE HX7 indicator, and it has been equippe (more)d with a 4-load-cell ramp platform made of stainless steel, AISI 304. This robust design facilitates weighing of heavy loads in humid environment. The ramps enable easy loading and unloading. Indicator with a colour 7” graphic display and a diode bar graph allow to observe visualisation of a current load mass presented in relation to the scale range or declared minimum and maximum thresholds. This makes the operation significantly easier. At the back of the housing there are hermetic connectors of RS232, RS485, USB and Ethernet communication interfaces, plus digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Indicator’s system of information is based on databases (users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety. Since the scale is equipped with a platform lifting system, you are kindly requested to order a transport box (OSB box for the platform) for it. The transport box is necessary for the safe and efficient transport and storage of the ramp scale with the platform lifting system. Please take this item into consideration when planning and placing your order. If you have any questions, the Customer Service Department will be happy to assist you.

Designed for daily use in the laboratory, dry block heaters are ideal for applications that require  (more)particular temperature stability. All units house two easily interchangeable modular blocks, with 40 options to choose from. Close contact between tube and block ensures maximum heat retention for efficient heating. Analog models: economic alternative; low temperature range: +5°C above ambient temperature to 100°C; high temperature range: 75°C to 150 ° C; control via two temperature adjustment knobs. Digital models: for repeatable results; from 5°C above ambient temperature to 120°C; control via touch pad controls with independent and easy to read LED displays for temperature and time display; sound alarm. Models with lid: from 5°C above ambient temperature to 100°C; like digital models but with a heated lid, to minimize condensation and preserve the integrity of the samples. - Exceptional temperature uniformity and extraordinary thermal stability. - Unique single point calibration function to ensure accurate display of actual temperature (digital models) Applications Culture incubation and activation, enzymatic reactions, immunoassays, melting / boiling points, isothermal incubation, nucleic acid denaturation Display LED display in digital models and knob with double adjustment and markings in analog models Operation Detachable three-wire cable and plug (included). Analog models require an external thermometer or temperature adjustment tool for the setpoint Structure Painted steel armor and support bar attachment with fixing knob Construction features Keypad control and audible alarm (digital models) ___________ Not sure which model to choose? Download the Dry Heater Selection Guide for a quick overview of all available models. For a complete list of available accessories, see our catalog: Ohaus Dry Thermostatic Bath Accessories

Ohaus heavy-duty orbital shakers These models are designed to handle a wide range of applications, e (more)nsuring constant orbital shaking. Digital models offer accurate speed control for applications that require repeatable results. - Includes a tray and a rubber mat; over 70 accessories as an option - Maintenance free motor - Protect your champions. The increase function allows a gradual increase of the speed up to the set point, to avoid splashing. If so, a sensor detects the unbalance of the load and slows down the speed reaching a safer one Applications Cell cultures, solubility studies, extractions, suspensions and bacterial and yeast cultures, dyes / bleaches, immunoassays, protein studies, absorption techniques Display Easy-to-read independent LED displays with speed and time information, allowing the operator to view both settings simultaneously Operation Detachable three-wire cable and plug (included) Communication The RS232 interface provides one-to-one communication for data collection and unit control Structure Cold Rolled Steel (CRS) Construction features Integrated tray (610 x 610mm) with non-slip rubber mat included.

Waterproof platform scales H315/HR series is designed for operation in locations with high humidity  (more)or direct contact with water. The scales is easily used in areas with no access to power supply from mains, as it features an internal rechargeable accumulator. Design Single load cell stainless steel platform scales H315 HR series is based on a terminal PUE H315 series. The terminal features large backlit LCD display and function buttons for easy operation. The terminal is installed on a pillar for easy readout of measurement result. Optionally, the scales is offered with indicator installed on a cable for mounting it on a wall. The weighing platform structure is made of stainless steel class AISI 316 with a stainless steel load cell providing the highest IP rating of 68. The scales features RS 232 interface, and optionally an additional display socket. The scales is powered from mains or internal rechargeable accumulator. Optionally, the scales can be powered from mains - 110/120VAC 60Hz (non-standard factory option).

M1 Mass Standard - knob weights. Nominal value - 500 kg.

This set is the perfect solution for laboratories and institutions requiring the highest precision.  (more)These cylindrical mass standards are made from the highest quality materials, ensuring excellent stability and resistance to environmental changes. Key Features: Highest class of accuracy: Class E1 is the highest standard of accuracy, making these standards ideal for calibrating precision measuring instruments. Cylindrical Shape: The cylindrical shape of the standards ensures ease of handling and precise placement on weighing platforms. Plastic packaging: The weights are delivered in a durable plastic case, ensuring their safe storage and transport. Set Includes: 11 mass standards, 2 pairs of tweezers, 1 brush and 1 pair of gloves. By choosing the E1 class mass standard set from RADWAG, you invest in reliability, precision, and durability, which translates to excellent quality in your laboratory work.

Ohaus Guardian 7000 e-G71HS07C Hotplate Stirrer, 120V The Ohaus Guardian 7000 Hotplate Stirrers are  (more)designed with outstanding safety features and superior heating and mixing performance. The SmartHousing is chemical resistant with an innovative, easy-to-clean design that channels spills away from internal components and the angled glass control panel. The bright LCD display includes intuitive icons, temperature, speed and time settings - all designed to monitor performance from across the lab. Protect your lab with SmartPresence and SmartLink technologies. These exclusive features automatically shut off the heater if no one is detected after a user set “time out” period has passed. An industry-leading early detection system that uses two independent safety controls to continuously monitor the electronics and shut off heating before an overtemperature condition occurs. Precise stirring from 60 to 1600 RPM is made possible by the design of a powerful motor, strong magnet and software-controlled ramp rate, ensuring secure magnetic coupling for viscous applications. SmartHeat allows you to set the maximum temperature of the unit and SmartRate enables fast or slow temperature and speed ramp rates. The programming feature allows storage of 5 multi-step programs. INCLUDED: The Ohaus Guardian 7000 e-G71HS07C Hotplate Stirrer, 120V includes: - Two Stir Bars (40 x 8mm and 28.6 x 8mm) - 8" Stainless Steel RTD Temperature Probe - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty