Radwag HX5.EX-1.4N.150.H1 Stainless Steel Ramp Scale

Ramp scale with stainless-steel load cells is intended for meat, fish, pharmaceutical, cosmetic and  (more)chemical industry. The scale is equipped with LD4N system allowing lifting the platform up, useful for maintenance purposes. The mechanism enables safe platform lifting and does not require physical exertion or additional equipment. Upon platform lowering, the scale is ready to carry out measurement. There is no need for recalibration. The scale is made of OH18N9 stainless steel and is equipped with PUE H315 indicator. On a customer request the scale can be made of steel of increased anti-corrosion resistance. The length of the cable for connecting the indicator to the platform - 3m. Ramp scale with LD4N system is equipped with only one ramp. Dual range weighing instrument for an additional charge. Since the scale is equipped with a platform lifting system, you are kindly requested to order a transport box (OSB box for the platform) for it. The transport box is necessary for the safe and efficient transport and storage of the ramp scale with the platform lifting system. Please take this item into consideration when planning and placing your order. If you have any questions, the Customer Service Department will be happy to assist you.

Ramp scales with stainless steel load cells is widely applied in meat, fish, pharmaceutical, cosmeti (more)c and chemical industry. The H315/4N series is manufactured in complete stainless steel technology with stainless steel indicator PUE H315 series installed on a long cable. Ramp scales is manufactured from OH18N9 stainless steel with IP 68. On special order, it is possible to manufacture ramp scales in upgraded anti-corrosion stainless steel version. Scales is available in dual range version on surcharge.

Ramp scales with stainless steel load cells is widely applied in meat, fish, pharmaceutical, cosmeti (more)c and chemical industry. The H315/4N series is manufactured in complete stainless steel technology with stainless steel indicator PUE H315 series installed on a long cable. Ramp scales is manufactured from OH18N9 stainless steel with IP 68. On special order, it is possible to manufacture ramp scales in upgraded anti-corrosion stainless steel version. Scales is available in dual range version on surcharge.

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

The HX7.4N H scale is a device controlled by means of the PUE HX7 indicator, and it has been equippe (more)d with a 4-load-cell ramp platform made of stainless steel, AISI 304. This robust design facilitates weighing of heavy loads in humid environment. The ramps enable easy loading and unloading. Indicator with a colour 7” graphic display and a diode bar graph allow to observe visualisation of a current load mass presented in relation to the scale range or declared minimum and maximum thresholds. This makes the operation significantly easier. At the back of the housing there are hermetic connectors of RS232, RS485, USB and Ethernet communication interfaces, plus digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Indicator’s system of information is based on databases (users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety.

The HX7.4N H scale is a device controlled by means of the PUE HX7 indicator, and it has been equippe (more)d with a 4-load-cell ramp platform made of stainless steel, AISI 304. This robust design facilitates weighing of heavy loads in humid environment. The ramps enable easy loading and unloading. Indicator with a colour 7” graphic display and a diode bar graph allow to observe visualisation of a current load mass presented in relation to the scale range or declared minimum and maximum thresholds. This makes the operation significantly easier. At the back of the housing there are hermetic connectors of RS232, RS485, USB and Ethernet communication interfaces, plus digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Indicator’s system of information is based on databases (users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety.

B.O.B Stevenson LTD 4047 MN 80355 Centrifugal Fume Extraction Fan Lab This item was removed from a u (more)niversity where it was surplus to requirement. It is in good cosmetic condition, we are unable to test it further at our facility.

Beckman JS 4.2 Series 4200RPM Swinging Bucket Rotor This was removed from a university lab where it  (more)was surplus to requirements. The unit is in good cosmetic condition but has not been tested. Maximum capacity- 6x1000mlMax RPM- 4200 Includes: X18 Beckman 4x50ml tube slots (345371)X14 Beckman 14x15ml tube slots (339180)X3 1000ml buckets 1066g (368575)X3 1000ml buckets 1067g (368575) Model number- JS-4.2Serial number- 07U2791

Peak Scientific HydroGen PH600 Hydrogen Generator This was removed from a university lab where it wa (more)s surplus to requirements. The unit does not produce hydrogen and has a service light. It starts up and it faults as it cannot achieve minimum pressure after several minutes of trying; the system check blinks with an Audible beep. It does not turn on the h2 delivery light (indicating that it is functioning). It is in reasonable cosmetic condition with marks from use. It is sold for spares/repairs

Memmert IPP750ecoplus Peltier-Cooled Forced Circulation Incubator 749L, 115V Temperature Range 0°C  (more)(at least 20°C below ambient) to 70°C [+10°C to 40°C with light] Convection Forced Ventilation by Peltier Fan Chamber Volume 749L (26.5 cu. ft.) Features - Utilizes advanced Peltier Technology for unmatched energy efficiency - Rapid heat-up, cool-down, and recovery times enhance operational efficiency - Provides absolutely homogeneous temperature distribution for consistent results - Fan integration in Peltier elements ensures optimal temperature control and energy transfer - Refrigerant-free operation, making it environmentally friendly and low maintenance - No compressor required, saving valuable laboratory space and minimizing noise and vibrations - Visual and acoustic alarms for immediate alerting in abnormal conditions - Interior fully sealed to minimize sample drying and prevent internal condensation - Constructed from high-quality, corrosion-resistant stainless steel for durability and ease of cleaning - User-friendly interface for easy operation and precise temperature management - TwinDISPLAY offers maximum convenience for managing complex processes - AtmoCONTROL software included on a USB drive for easy programming and data management The Memmert IPP750ecoplus Peltier-Cooled Forced Circulation Incubator 749L, 115V epitomizes the pinnacle of efficiency and advanced technology in temperature-controlled cultivation. Enhanced with the TwinDISPLAY feature, this model offers unparalleled convenience and control for even the most complex processes. Powered by Memmert's advanced Peltier Technology, the IPP750ecoplus not only sets new standards in energy efficiency, significantly reducing operating costs compared to traditional compressor-based chambers, but also excels in rapid heat-up, cool-down, and recovery times, making it ideal for a variety of applications such as microbiological analyses, bacterial count determination, and accelerated aging tests for dairy products. This incubator achieves homogeneous temperature distribution, thanks to its sophisticated design which includes integrated fans within the Peltier elements for optimal temperature control and energy transfer. The completely sealed interior of the unit minimizes the risk of sample drying out and avoids condensation within the working chamber, with moisture forming externally on the Peltier element during the cooling process. The IPP750ecoplus operates without a compressor, which saves valuable laboratory space and ensures that the operation is exceptionally quiet and free from vibrations. It is constructed from high-quality, corrosion-resistant stainless steel, ensuring both durability and ease of cleaning. The unit's user-friendly TwinDISPLAY allows for the intuitive control and seamless management of complex processes through the AtmoCONTROL software, which can be accessed via a USB drive for programming, managing, and transferring programs either through an Ethernet interface or a USB port. Multiple overtemperature protections, visual and acoustic alarms, and options for automatic email notifications enhance its safety features, making the IPP750ecoplus a critical tool for laboratories seeking the highest efficiency and reliability in their research environments. INCLUDED: The Memmert IPP750ecoplus Peltier-Cooled Forced Circulation Incubator 749L, 115V includes: - 2 x Stainless Steel Wire Shelves - Anti-Tilt Bracket - USB Drive w/ Software & AtmoCONTROL Manual - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Temperature range: Ambient +5°C to 100°C Temperature fluctuation (at 37°C): ± 0.1 K Temperature fluc (more)tuation (at 50°C): ± 0.1 K Temperature uniformity (at 37°C): ± 0.5 K Temperature uniformity (at 50°C): ± 0.9 K Warming up time (to 37°C): 70 min Warming up time (to 50°C): 115 min Recovery time after door was opened for 30 sec (at 37°C): 5 min Recovery time after door was opened for 30 sec (at 50°C): 6 min Maximum load: 70 kg Maximum load per shelf: 30 kg Capacity: 240 L Dimensions (WxHxD): 1035 x 825 x 745 mm Interior dimensions (WxHxD): 800 x 600 x 500 mm Weight: 93 kg

Thermo Scientific Electron Finnpipette 5-50µl Laboratory Pipette Variable volume pipette 5-50µl Volu (more)me: 5-50 µl Increment: 0.5 µl Not calibrated Test performed using a 10-4 g (0.1mg) balance: Reading (in g) for 50 µl: 0.050