Radwag Stand for PUE HY10 / PUE HX7 / PUE HX5.EX terminal - stainless steel version

Stainless Steel HRP EX.H Platform Wherever high readability and precision are important. Wherever go (more)od repeatability in harsh industrial conditions matters. Stainless Steel HRP EX.H Platforms are the ideal solution for any type of industry. Repeatability that cannot be repeated by others Stainless Steel HRP EX.H Platforms have a built-in internal adjustment system. Automatic internal adjustment guarantees the best quality of work and repeatability of results. You save time and avoid the inconvenience of manual adjustment. Hazardous areas are their natural environment Stainless Steel HRP EX.H Platforms have been developed in accordance with Directive 2014/34/EU and the IECEx scheme and, depending on their design, can operate in environments containing explosive gases or dust, classified as zones: 2 and 22. We have equipped them with an intrinsically safe RS 485 communication interface, which allows the platform to work with the PUE HX5.EX weighing meter. To power the platforms, we have dedicated intrinsically safe PM02.EX-1-2 or PM02.EX-2-2 power supplies. Use the potential Stainless Steel HRP EX.H Platforms work with the PUE HX5.EX weighing terminal and are compatible with RADWAG receipt printers. In addition, you will match them with appropriate antivibration tables from our offer, and thus increase the readability of your measurements. The use of stainless steel for the construction of the pan guarantees you a long life of the platform. Fearless of its contact with moist objects or accidental splashing.

Frame intended for 4-load-cell stainless steel scales, that are to be embedded in the ground.

The certified intrinsically safe PM02.EX power supply, manufactured by RADWAG, has been designed to  (more)power the HRP.EX. PM02.EX power supply comes in two designs: PM02.EX-1-2: power supply intended for operation in hazardous area: Zone 1 and 2, where there is a risk of explosion due to mixture of air with vapour, mist or gas, classified as explosion group IIC, IIB and IIA and as temperature class T1, T2, T3, T4. Zone 21 and 22, where there is a risk of explosion due to mixture of air with dust, flammable fibres and volatile fuels, classified as explosion group IIIC, IIIB and IIIA. PM02.EX-2-2: power supply intended for operation outside hazardous area, equipped with intrinsically safe circuits that can be placed in: Zone 1 and 2, where there is a risk of explosion due to mixture of air with vapour, mist or gas, classified as explosion group IIC, IIB and IIA and as temperature class T1, T2, T3, T4. Zone 21 and 22, where there is a risk of explosion due to mixture of air with dust, flammable fibres and volatile fuels, classified as explosion group IIIC, IIIB and IIIA. The certified intrinsically safe PM01.EX power supply, manufactured by RADWAG, has been designed to power the HX5.EX indicator. PM01.EX power supply comes in two designs: PM01.EX-1: power supply intended for operation in hazardous area: Zone 1 and 2, where there is a risk of explosion due to mixture of air with vapour, mist or gas, classified as explosion group IIC, IIB and IIA and as temperature class T1, T2, T3, T4. Zone 21 and 22, where there is a risk of explosion due to mixture of air with dust, flammable fibres and volatile fuels, classified as explosion group IIIC, IIIB and IIIA. PM01.EX-2: power supply intended for operation outside hazardous area, equipped with intrinsically safe circuits that can be placed in: Zone 1 and 2, where there is a risk of explosion due to mixture of air with vapour, mist or gas, classified as explosion group IIC, IIB and IIA and as temperature class T1, T2, T3, T4. Zone 21 and 22, where there is a risk of explosion due to mixture of air with dust, flammable fibres and volatile fuels, classified as explosion group IIIC, IIIB and IIIA.

Stainless steel 4-load-cell ramp platforms, equipped with LD4N platform lifting system useful for ma (more)intenance purposes. Since the scale is equipped with a platform lifting system, you are kindly requested to order a transport box (OSB box for the platform) for it. The transport box is necessary for the safe and efficient transport and storage of the ramp scale with the platform lifting system. Please take this item into consideration when planning and placing your order. If you have any questions, the Customer Service Department will be happy to assist you.

KR-04-1 converter is designed for scales not equipped with the Ethernet interface. The device enable (more)s operation of a scale equipped only with RS 232 in weighing systems (e.g. CPG) based on LAN network. The converter features a plastic housing, 1.7-meter-long RS 232 cable with DB9/F plug, Ethernet RJ45 connector, and a power supply permanently connected to the converter with 1.8-meter-long cable. The Ethernet cable with RJ45 plugs does not come standard with the converter. The latest version of Network Enabler Administrator software: 2.11

With use of IM01.EX communication module it is possible to expand communication interfaces range of  (more)the HX5.EX indicator. The module is installed outside the hazardous area, and connected to the indicator using intrinsically safe interface. IM01.EX allows to establish communication between the scale and various accessories, e.g. barcode scanners, printers, displays, control buttons, light signalling towers, buzzers and other controlling/signalling devices. It also enables connection with systems of automatic adjustment and control of industrial processes, and with superior IT systems. IM01.EX-9 interfaces: 2 x RS232, USB, 4 IN, 4 OUT (digital), ETHERNET IP. It is possible to configure module interface quantity following the Interface Configuration Table that is to be found in product data sheet.

Additional technical features: - External structure in steel painted with antiacid epoxy powder - In (more)ner chamber in stainless steel - 45 mm hole on the rear side for flue gas discharge with device for opening / closing the passage of cables, probes, etc. - 10 mm hole on the upper side for inserting the thermometer or probes - Temperature control with microprocessor - Adjustable safety thermostat - Safety class 3.1 - 4 work programs of 8 segments - Repeatability With the optional software you can control the operation of the programs in a very simple way and have all the data under control. Specifically, you can: - Create charts - Archive the history - Check and see all processes on a graph - Optimize times Quality materials: - External structure in steel sheet painted with anti-acid epoxy powder - Inner chamber in 18/8 stainless steel

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

F1 Mass Standard - knob weights, wooden box. Nominal value - 2000 kg.

SCILOGEX SCI340-ProT Circular LCD Digital Magnetic Hotplate Stirrer, ceramic plate, with PT1000 Sens (more)or & Sensor StandThe SCI340-ProT is one of the most technically advanced hotplate-stirrers in the marketplace and features an independent back-lit LCD display for both heat, stirring and timer functions and PID technology. The MS-H-Pro-T controls temperature at +/- 1ºC. Simply set the timer from 1min to 99hr-59min and the hotplate will heat at the target temperature for the set time period and automatically turn off. If the stirring function is activated, the unit will continue to stir until switched off. The MS-H-Pro-T also has a DC brushless (spark free) motor for extremely long life and excellent performance. SCILOGEX 340°C magnetic hotplate stirrers include all leading safety standards and features for superior ease of use and are cost-effective. They are widely used in chemical synthesis, physical and chemical analysis, biopharmaceuticals, etc.Product Features - Heat only, stir only or heat and stir together functions, High-resolution LCD display shows actual temperatures and speed. - Digital speed control with max. speed up to 1500rpm - External temperature control is possible by simply connecting a PT-1000 temperature sensor (sold separately) with accuracy at ±0.2°C. - Max. stirring quantity of H2O at 20L. - RS232 function provides PC control and data transmission (free software available) - Wide range timer function from 1min to 99h59min (MS-H-ProT only) - The “HOT” warning will flash if the plate temperature is above 50°C even when the hotplate is turned off. - Automatic spin bar retrieval - Low temperature stability - Digital temperature control with max. temperature at 340°C - Stainless steel work plate with ceramic coating provides good chemical-resistant performance. - Accessory reaction blocks for flasks and vessels available sold separately. - Electronic speed control for constant speed even during changes in load - Brushless DC motor is maintenance free. - High magnetic adhesion - Comes with a free 50mm L x 5mm Dia. Magnetic Stir bar. Click Here to View Product Video INCLUDED: The SCILOGEX SCI340-ProT Circular LCD Digital Magnetic Hotplate Stirrer, ceramic plate, with PT1000 Sensor & Sensor Stand includes: - Power Cord - PT 1000 Temperature sensor and stand - Two Year Manufacturer's Warranty

The MJ Research PTC-100 Thermal Cyler is a robust thermocycler that operates with 96-well microplate (more)s. This thermocycler is reliable and easy-to-use, while also offering various temperature configurations from 0°C to 105°C with temp accuracy of ± 0.3°C. The PTC-100 has a heated lid for oil-free operation, which allows for convenient pressure and height adjustment via a thumbwheel. Crafted to withstand repeated cycling, the PTC-100 thermocycler can follow any temperature sequence up to 10,000 times and can store material indefinitely at any temperature, allowing for highly accurate incubation rates. The MJ Research PTC-100 can store approximately 320 programs and comes with 14 pre-programmed protocols. Due to the PTC’s power-failure protection feature, data is safe after power interruption for up to twelve hours. Thermal Range: 0°C – 105°C Accuracy: ±0.5°C of programmed target at 60°C Thermal Uniformity: ±0.4°C well-to-well within 30 sec of arrival at 60°C Ramping rate: up to 1.2°C/sec Sample Capacity: 96 x 0.2 ml tubes or one 96-well plate