Radwag RES Radwag Extended SI Module (PUE HY10)

An accessory for the ELLIPSIS laboratory balances, designed to read fingerprints in order to log int (more)o the balance. Simply touch the reader to log in. The fingerprint reader is connected to the ELLIPSIS balance via the USB port.

Frame intended for 4-load-cell stainless steel scales, that are to be embedded in the ground.

The KR-01 converter is designed to adjust the RS 232 and RS 485 signals. It is intended for balances (more) and scales with RS 232 port (DB9/M connector) operating in weighing systems. The device automatically detects data transfer direction. Its interfaces, RS 232 and RS 485, are galvanically separated. The converter features 1.7-meter-long RS 232 cable with DB9/F plug, 1-meter-long, two-wire RS 485 cable, a plastic housing and a power supply permanently connected to the converter with 1.8-meter-long cable.

Wherever high readability and precision are important. Wherever good repeatability in harsh industri (more)al conditions matters. Waterproof steel platforms are the ideal solution for any type of industry. Use the potential Our platforms can work with one of four weighing terminals to choose from: PUE 7.1, PUE HX7, PUE HY10, PUE 5. They have four load cells, which means that no matter where you put the goods on the pan, the measurement result will always be the same. The power of steel The use of stainless steel for both the pan and the frame guarantees you a long life for the platform. It is not intimidated by contact with moist objects or accidental splashes. The entire construction made of stainless steel translates into a high degree of protection for these platforms: IP 68.

Wherever high readability and precision are important. Wherever good repeatability in harsh industri (more)al conditions matters. Waterproof steel platforms are the ideal solution for any type of industry. Use the potential Our platforms can work with one of four weighing terminals to choose from: PUE 7.1, PUE HX7, PUE HY10, PUE 5. They have four load cells, which means that no matter where you put the goods on the pan, the measurement result will always be the same. The power of steel The use of stainless steel for both the pan and the frame guarantees you a long life for the platform. It is not intimidated by contact with moist objects or accidental splashes. The entire construction made of stainless steel translates into a high degree of protection for these platforms: IP 68.

Stainless steel 4-load-cell ramp platforms, equipped with LD4N platform lifting system useful for ma (more)intenance purposes. Since the scale is equipped with a platform lifting system, you are kindly requested to order a transport box (OSB box for the platform) for it. The transport box is necessary for the safe and efficient transport and storage of the ramp scale with the platform lifting system. Please take this item into consideration when planning and placing your order. If you have any questions, the Customer Service Department will be happy to assist you.

Waters 2525 Binary Gradient Module Lab This item was removed from a university where it was surplus  (more)to requirement. It is in reasonably good cosmetic condition but does not power on. Therefore, we are unable to test it, and it is listed as Spares/Repair.

Labconco FreeZone Stoppering Tray Dryer FreeZone Stoppering Tray Dryers lyophilize moderate to larg (more)eloads of vials or serum bottles and stopper them under vacuum. They offertemperature control from -40 to +40C. Options include a 6-port manifold,isolation valve and sample trays. A pneumatic mechanism stoppers containers undervacuum on three large adjustable processing shelves, 16.5” x 12” each. AnHCFC/CFC-free refrigeration system and electric heater cool and heat fluidmedium that is circulated through the shelves to maintain shelf temperatureswithin ±1C. Lyo-Works™ OS lets the user set up to 30 programs, with up to 16steps each; record, chart and store data; and receive email alerts. The traydryer connects to a FreeZone Console Freeze Dryer that provides a real timedisplay of the tray dryer’s parameters on a large capacitive touch screen. Features Three 16.5 x 12 in. temperature-controlled (±1C), adjustable shelves with sample temperature sensors Chamber pre-freezes samples to save time and money by eliminating need for separate freezer and product transfer Up to 594 sq. inches of shelf space Circulating fluid in shelves ranges from -40 and +40C 1/8 in. OD backfill port introduces sterile air or inert gas from outside source to chamber, protecting samples from atmospheric moisture and contaminants Lyo-Works™ OS provides real time display of freeze dryer and tray dryer parameters on 5 in. full color, capacitive touch screen on connected FreeZone 6, 12, or 18L Freeze Dryer (sold separately) Microprocessor-based controller allows up to 30 different temperature programs to be stored and repeated, each using up to 16 different steps Display provides navigation to manual or program mode, probe temperatures, vacuum in mBar, Torr or Pa, step of program in progress, time remaining in present step, and end of program, as well as alarms Optional 6-Port Tray Dryer Manifold accommodates either 1/2 in. or 3/4 in. flask adapters and connect to flasks and other glassware Optional built-in isolation valve separates Stoppering Tray Dryer from freeze dryer to shorten time necessary to reestablish working vacuum levels and to provide means for determining end point Freeze dryer, vacuum pump with displacement of at least 163L/minute, and freeze dry glassware (if not bulk freeze drying) are required (not included) INCLUDED: The Labconco 794801000 FreeZone Stoppering Tray Dryer 115V, 60Hz includes: - Sample Temp Sensor x 3 - Communication Cable - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Ohaus 30314827 4 x 85ml Fixed Angle Rotor The Ohaus 30314827 4 x 85ml Fixed Angle Rotor accommodates (more) a capacity of up to 4 x 85ml. This rotor is designed for use with Ohaus FC5916, FC5916R, FC5816, FC5816R, FC5718, and FC5718R series centrifuges. The Ohaus 30314827 fixed angle rotor reaches speeds up to 20,000 RPM with a maximum RCF of 41,137 x g. INCLUDED: The Ohaus 30314827 4 x 85ml Fixed Angle Rotor includes: - Ohaus 30314827 4 x 85ml Fixed Angle Rotor - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Scilogex DM1424 Hematocrit CentrifugeThe DM1424 Hematocrit Centrifuge with AC24P rotor is used for d (more)etermination of volume fractions of erythrocytes in blood and also for separation of micro blood and solutions. The DM1424 conforms to international safety standards and regulations.The SCILOGEX DM1424 centrifuge is certified with CE, cTUVus and FCC. MCA test according to IEC/EN61010-2-20 including explosion-proof and bio-safe tests. Passed EN61010-2-101:2002 requirements for invitro diagnostic (IVD) medical equipment. Features: High accuracy of speed, excellent performance CPU controls all operating parameters including speed and time RPM or G-force can be set and displayed Operation can be timed from 30 seconds to 99 minutes or continuous running Timer commences once the set speed is reached, so the separation time is more accurate Gentle braking at low speeds with efficient separation Parameters can be modified after the set speed is reached Quick spins are possible by pressing and holding PULSE key Automatic release the lid when operation has stopped to save processing time Easy-to-read backlit LCD processing display and sound alert Can be pulse accelerated and held at speed High strength aluminum hematocrit rotor included (optional fixed angle rotor for 1.5/2.0ml tubes) Brushless motor drive quickly and effortlessly accelerates the rotor to set speed 2 YEAR WARRANTY Click Here to View Product Video INCLUDED: The Scilogex DM1424 Hematocrit Centrifuge includes: - AC24P Rotor - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

MiniVertigel 2 APELEX for 2 gels 0.8mm 10 x 10cm New equipment in its original packaging Reference:  (more)400000 Comes complete with casting base Useful dimensions of gels 9 x 8.5 cm (L x H) Glass plates 10 cm x 8-10 cm Height Volume of acrylamide for 2 gels 15 ml Constant current 15 to 30 mA per gel Voltage from 150 to 300 Volts Migration time: 30 to 60 minutes

Wherever high readability and precision are important. Wherever good repeatability in harsh industri (more)al conditions matters. Waterproof steel platforms are the ideal solution for any type of industry. Use the potential Our platforms can work with one of four weighing terminals to choose from: PUE 7.1, PUE HX7, PUE HY10, PUE 5. They have four load cells, which means that no matter where you put the goods on the pan, the measurement result will always be the same. The power of steel The use of stainless steel for both the pan and the frame guarantees you a long life for the platform. It is not intimidated by contact with moist objects or accidental splashes. The entire construction made of stainless steel translates into a high degree of protection for these platforms: IP 68.