Ohaus PX124 Pioneer Analytical Balance, 120 g, 0.0001 g

SARTORIUS QUINTIX5100-1S precision balance 5100g / 1g New equipment in its original packaging Labora (more)tory balance Reference: QUINTIX5100-1S Weighing capacity: 5100g (5.1kg) Readability: 1 g Linearity: 1 g Stabilization time: 1.5 s Dimensions weighing surface: Ø180 mm Weight: 4.7Kg

Capacity: 120 g Readability: 0.1 mg Repeatability: ≤±0.1 mg Linearity: ≤±0.2 mg Response time: ≤ 2 s (more) Pan size (inner diameter): 80 mm Pan surface: 64 cm² Weighing chamber height: 232 mm Dimensions (WxDxH): 213 x 342 x 340 mm Weight: 6.5 kg

E1-class mass standards are the elite in the world of metrology, because standards of this class rep (more)resent the highest level of precision and accuracy in mass measurement. The E1 classification is one of the most stringent standards that standards must meet in order to be considered the most advanced and trustworthy measurement tools. E1 - class standard: flat polygonal sheet Nominal value: 200 mg Material: Stainless steel What Are the Characteristics of the E1 Class? Highest Precision - The allowable deviation from the actual weight is minimal, making standards of this class ideal for applications where every gram matters. Stability and Repeatability - This guarantees a consistent level of accuracy over the long term. Accurate Calibration - Standards of this class must be regularly compared with other standards of known mass to confirm their measurement accuracy. Materials with Unique Properties - E1 class mass standards are often made of materials with exceptional physical properties, which makes them stable and resistant to changes in environmental conditions. Application 1. Analytical Laboratories In analytical laboratories where accurate measurements are crucial, E1 class mass standards are used to calibrate balances with the highest precision. 2. Pharmaceutical Industry In drug manufacturing, where even the slightest deviation from the standard affects quality, E1 class mass standards are irreplaceable. 3. Scientific Research In scientific research, especially in areas requiring the highest precision, such as physics or chemistry, E1 class mass standards are used to ensure reliable results. 4. Metrology Industry In metrology laboratories where research on E1 class mass standards alone is carried out, E1 class standards are the standard of excellence. Class E1 mass standards are not only measuring tools, but also a symbol of metrological excellence. Their use affects the quality of measurements in various areas of life because they provide precision that can be relied upon. They are a key element in the world of mass measurement, shaping standards and raising the bar for all measurement tools.

Highest Precision The E1 class mass standard of 20 kg is a cylindrical standard with the highest pre (more)cision, ensuring accuracy at the highest level. Made of high-quality materials to guarantee stability and reliable results. Ideal for laboratory, research, and industrial applications where weighing precision is crucial.

The MPS R device comprises electromagnetic MPS module and R touch panel featuring 5.7” display (more). It has been designed to be integrated into weighing systems already owned by the customer. Compact design plus integrated electronics make MAS module easy to be adapted into technological lines and built inside customer-owned devices. It is possible to perform the measurements using the under-pan weighing method wherein the load is suspended beneath the module or a regular weighing pan. Due to high measurement accuracy, it is recommended to install the module inside customer's device (e.g. in a draft shield) in order to reduce the influence of ambient conditions on the measurement result. The MPS module comes standard with a dedicated power supply. Features: Brand new design of the electromagnetic mechanism housed in an aluminium enclosure, Readability of 0.01 g, Ease of adaptation to the required storage space, Internal adjustment, Various options of hardware configuration. The module has been equipped with RS232 and USB type B interfaces. Dedicated freeware software, R Panel, has been designed to enable control of the module via a computer. It provides access to all the keys and functions available directly from the operation panel, e.g. taring, zeroing, setup, etc. An innovative algorithm for automatic search of electromagnetic weighing modules is a guarantee for a remarkable ease of connection of a module to a computer. With R Panel software, the complete functionality of R series balances is available via PC. R Panel functionality has been implemented in RLab program as one of its numerous functions. MPS.R can also be integrated with E2R Weighing Records and E2R PGC.

Weighing range: 820 g/ 4200 g Readability: 0.01 g/ 0.1 g Repeatability: 0.01 g/ 0.1 g Linearity: ±0. (more)08 g Settling time: 1.5 s Calibration: Internal (automatic/FACT) Dimensions weighing platform (WxD): 200 mm x 170 mm Dimensions (HxWxD): 99 mm x 194 mm x 347 mm Weight: 4.6 kg

This listing is for 1 of 2 Mueller PyroPure P7310 Pure Steam Generator.The unit is in full working c (more)ondition and is ready for immediate release.This Unit was installed new in 2015 by Freestead Process Technology.The “Turned on Time”of the unit is 65,000 hours, but as this unit is 1 of 2 generators in an alternating system it does not indicate the "Steam Production Time". The sites steam requirements were low therefore the unit is in immaculate condition.They have full maintenance records backed up on their electronic technical system supplied as an extra by Freestead.This Unit is fitted with a Allen Bradley Compact Logix PLC and Panel View plus 1000 HMI'sThe Unit is supplied with-⦁ Feed water pump system⦁ Pure steam condensate sampling system⦁ Pure steam analyser⦁ Stainless steel sheathing and frame⦁ Feed water analyser⦁ DegasserThe Mueller PyroPure P7310 Pure Steam Generator is a high-performance system designed to produce pyrogen-free pure steam suitable for the most demanding applications, such as pharmaceutical production, biotechnology processes, and healthcare sterilization. Built to meet or exceed U.S. Pharmacopoeia (USP) standards, the P7310 combines precision engineering, advanced technology, and robust materials to ensure consistent performance and reliability. They are CE marked and compliant with 3.1B material certification.The terms pure steam and clean steam are often used interchangeably in the pharmaceutical industry. However, not all equipment marketed as clean steam generators are up to the task of producing WFI quality pharmaceutical pure steam. Mueller pure steam generators use a tangential nozzle to provide separation of impurities from incoming feed water, producing pyrogen-free steam that, when condensed, meets USP requirements for water for injection.Key BenefitsSuperior Steam Quality:Produces pyrogen-free steam that meets USP requirements, ensuring safety and regulatory compliance.Optimized for critical applications like autoclaves, clean room humidification, and steam-in-place (SIP) sterilization.Achieves a 5 Log reduction in contaminants, which corresponds to a 99.999% reduction in microbial populations. This level of reduction ensures the highest degree of sterilization, making it ideal for pharmaceutical and biotechnology applications where absolute purity is critical.Efficient Design:External evaporator allows easy access for inspection and maintenance, reducing downtime.Separation column has no internal components requiring maintenance, eliminating potential for bacterial growth.Efficient heat transfer with a double-tube sheet evaporator minimizes stress cracking and maximizes performance.Ease of Maintenance:All critical components can be serviced with only 24" of clearance around the system.Fully drainable design prevents standing water, reducing contamination risks.Polished 316/316L stainless steel construction ensures durability and easy cleaning.Enhanced Operational Features:Minimal instrumentation is required, reducing complexity and operational costs.Simplified control with an Allen-Bradley PLC system, compatible with Ethernet for integration with facility systems.Certified elastomers (USP Class VI) provide enhanced compatibility with feed water and product.SpecificationsPerformance:Pure Steam Capacity: 2,300 lb/hr (1,043 kg/hr) at optimal feed water conditions.Operating Pressure Range: Pure steam output pressure up to 50 psig.Material and Surface Finish:Product-contact surfaces: Electro-polished 316/316L stainless steel with a maximum roughness of 20 Ra.Feed water-contact surfaces: Polished to 25 Ra maximum for longevity and cleanliness.Connections:Feed water Inlet: 1" Tri-Clamp.Pure Steam Outlet: 2" Tri-Clamp.Condensate Outlet: 1" FNPT.Instrument Air: 0.25" FNPT.Power Requirements:460 VAC, 3-phase, 60 Hz (customisable options available).Dimensions and Weight:Height: 115" (292 cm)Width: 50" (127 cm)Depth: 54.5" (138 cm)Approximate Operating Weight: 2,350 lbs (1,070 kg).Feed water Requirements:Inlet temperature: 70°F (21°C) recommended.Maximum silica: 1 ppm.Free from chlorine, chlorides, or amines.Flow rate must exceed pure steam production by 5–10% to accommodate blow down.Optional Features:Feed water Pump System: Boosts feed water pressure for systems with lower supply pressure.Pure Steam Condensate Sampling System: Simplifies sampling for compliance and quality testing.Pure Steam Analyser: Monitors and records temperature and conductivity, triggering alarms if thresholds are exceeded.Degasser: Removes non-condensable gases to meet strict purity standards.Water-for-Injection (WFI) Production: Integrates a pure steam condenser to produce up to 150 gallons/hour of WFI.Applications:Pharmaceutical Manufacturing: Sterilization of equipment, tools, and containers.Biotechnology: Ensures sterile conditions for sensitive biological processes.Healthcare: Critical area humidification and sterilization in hospitals and clinics.Food and Beverage: Clean steam for production and packaging processes.

This job lot of items comes from a variety of university laboratories. The items were no longer requ (more)ired, collected from various store rooms and facilities. None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should operate well. None of these items have been PAT or electrical safety tested. For this reason, we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks. They are sold as a spares/repairs bundle intended to be purchased by someone who has time to test and where necessary refurbish the units. It is an excellent opportunity for anyone looking to benefit from individual equipment resale. The units have not been tested at all. - Waters USER I/O AND USER I/O PIGGYBACK PC - 4172002DC1-S Lab - Schott KL200 Fibre Optic Illuminator Light Source Lab - Extreme Networks BD 8800 10G4Xc Network Switch Module Model - 41614 - Extreme Networks BD 8800 10G4Xc Model - 41614 Network Switch Module - Extreme Networks BD 8800 10G4X Network Switch Module Model - 41611 - Extreme Networks Black Diamond BD 8800 G48Xa Model - 41542 Network Switch Module - Robbins Scientific AP Wash Module with Automated Positioner Lab - NPI EXT-02F & EXT-02F/1 Extracellular Amplifiers Lab - Infinitesima ActivResonance Controller Lab - HD Technologies Part HDT-HTS1 - FD/FI Source Supplies Modular Unit - Busch Type- SV 1003 A000 Vacuum Pump Lab - Knauer Osmometer Automatic Lab - Promega ReliaPrep LV 32 HSM Heater / Shaker Magnet Lab A1711 - LDC Analytical Variable Wavelength Detector Spectro Monitor 3200 Lab - Kem Density/Specific Gravity Meter Model DA-640 Lab - Sorvall HB-6 13000rpm Centrifuge Rotor - 6 x 50ml Lab - Spectroline TS-312A UV Variable Range Transilluminator Lab - Gentex Q-Fill II 2 and Q-Stack Microplate Stacker System Lab - Roche RTS ProteoMaster Rapid Translation System Lab - Anrtisu Portable STM-16 Analyzer Model MP1656A Lab - Nortel Erbium Doped Fiber Amplifier Model FA17UFAC-1-19C28 Lab - Avenex Powerform DCM Fiber Module Part Number. 033063001 Lab - Biochrom Libra S6 Visible Spectrophotometer Lab (Firmware Issue) - JDS SB Series Fiber Optic Switch Part No. SB16B5-C0FA Lab - Edwards EDM 2 High Vacuum Pump Lab - Haake B7-DL3O Recirculating Water Bath Lab - Vibro-Meter Torquemaster TM107 Torque Transducer Magtrol Vibrometer - Jenway 6300 Spectrophotometer - VWR VCP 130 Membrane Dry Vacuum Pump

Ohaus 30400127 384 Well PCR Plate Thermal Block The Ohaus 30400127 384 Well PCR Plate Thermal Block  (more)is crafted from Valox 357 Plastic for durability. This block is compatible with all Ohaus ISTH Series Thermal Shakers, and has a well depth of 0.32 in. INCLUDED: The Ohaus 30400127 384 Well PCR Plate Thermal Block includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Beam scales H315/4P2 series is stable and proved four load cells weighing solution with more versati (more)le application than standard pallet scales. The adjustable distance between the beams (up to 5 meters) enables fitting the H315/4P2/H scales to different loads (cases, long bars, heavy sections). The load to be weighed can be placed on the beams by a standard fork-lift truck. Beam scales H315/4P2/H series is manufactured in stainless steel version. Optionally, the number of beams in a scale can be increased to 4. Beam scales features handles for easy transporting the scales to its place of use. The scales comes standard with an indicator PUE H315 in stainless steel housing, featuring backlit LCD display and function buttons. The indicator is installed on a long cable. The scale is powered from mains 230V AC, RS 232 interface comes standard. Scales is available in dual range version on surcharge.

XA17 pipette calibration adapter enables calibration and/or verification of piston pipettes by means (more) of a gravimetric method using the XA analytical balence. Set content: base weighing pan weighing vessel evaporation ring glass chamber with an opening for dosing Evaporation ring is an integral part of the adapter that increases relative humidity inside the weighing chamber. With this evaporation of the liquid during calibration/verification is stopped. An integrated weighing pan enables centric loading of the vessel in the weighing chamber. The weighing pan and the vessel are housed in a glass chamber featuring an opening allowing the user to dispense liquid through it, and reducing air drafts. Vessel capacity: 17 ml Adapters for Pipettes Calibration Pipette calibration adapters are intended for calibration and verification of piston pipettes using gravimetric method. Use of the pipette calibration adapter reduces maximum capacity of the balance by the mass of the weighing vessel. The table below, which presents the minimum requirements in accordance with ISO 8655-6:2022 standard, enables to select suitable adapter for pipette calibration and respective balance version. The parameters of the balance have been selected so that the expanded uncertainty of measurement in use is less than ¼ of the maximum permissible error of the test object. Nominal volume of apparatus under test V Resolution (d) mg Repeatability (s)3mg Recommended balance Microbalances Analytical balances 0,5 µl ≤ V < 20 µl 0,001c 0,01d 0,006c, e 0,03d MYA 21.5Y XA 6/21.5Y.M.A XA 6/21.5Y.M XA 21.5Y.M.A XA 21.5Y.M XA 21/52.5Y.M.A XA 21/52.5Y.M XA 53.5Y.M.A XA 53.5Y.M 20 µl ≤ V < 200 µl 0,01 0,025 XA 52.5Y XA 110.5Y XA 82/220.5Y.A XA 82/220.5Y XA 120/250.5Y.A XA 120/250.5Y 200 µl ≤ V ≤ 10 ml 0,1 0,2 Adapter for pipette calibration MY 11 XA 11 XA 11 XA 11 XA 11 XA 17 XA 17 XA 17 XA 100 XA 17 XA 100 Maximum vessel capacity 11 ml 11 ml 11 ml 11 ml 11 ml 17 ml 17 ml 17 ml 100 ml 17 ml 100 ml Weighing vessel mass ~ 10 g ~ 10 g ~ 10 g ~ 10 g ~ 10 g ~ 11 g ~ 11 g ~ 11 g ~ 65 g ~ 11 g ~ 65 g a The repeatability values, in this table, apply in the volumen determination of a single channel pipette. When a single-channel balance is used for volumen determination of single channel pipettes the repeatability values are double the values of this table. c Single-channel balance. d Multichannel balance, only valid for multi-channel pipettes. Multi-channel balances of 0,01 mg readability may be uses to test multi-channel pipettes with nominla volumes below 20 µl only if the expanded uncertainty in use is less than ¼ of the maximum permissible systematic error of the test object. e For single-channel pipettes of nominal volumes of less than 2 µl, a balance with repeatability better than the values in the table shall be used so that the expanded uncertainty in use is less than ¼ of the maximum permissible systematic error of the test object. table {font-size: 12px} td {padding:10px; } tr {text-align:center;} @media (max-width: 800px) { table {font-size: 9px} td {padding: 1px 1px} }