Ohaus EX24001 Explorer Precision High Capacity Balance, 24000 g, 0.1 g

METTLER TOLEDO PB1501-L precision balance 1500g / 0.1g Model: PB1501L Laboratory balance Weighing ca (more)pacity: 1500g (1.5kg) Readability: 0.1 g Dimensions of the weighing plate: Ø180mm Dimensions (L x D x H): 245 x 321 x 89 mm Net weight, approximately: 3.6 kg Tested at 100g/200g/500g In good working order

F2 Mass Standard - rectangular weights. Nominal value - 5 kg.

PS.R2 series balances represent a new standard of precision balances. They feature a new, readable L (more)CD display which allows a clearer presentation of the weighing result. Besides, the display has a new text information line allowing to show additional messages and data, e.g. product name or tare value. Communication interfaces New PS.R2 balances, like previously designed PS series balances, have pans in two possible dimensions: 128x128 mm or 195x195 mm balances with a smaller pan have a draft shield. The balance precision and the measurement accuracy is assured by automatic internal adjustment, which takes into consideration temperature changes and time flow. PS.R2 balances feature several communication interfaces: 2 x RS 232, type A USB, type B USB and optional Wireless Connection. The balance may cooperate with computer by means of USB interface supposing a supplementary software has been installed (respective driver). The said driver may be downloaded from RADWAG website – SOFTWARE link or SUPPORT section. The housing is made of plastic, and the pan is made of stainless steel. The balances have a possibility to weigh products out of the pan (under-pan weighing) - the load hangs under the pan. Databases in R Series Balances The information system is based on 5 databases, which allows for several users to work with several products databases, and the registered weighing results can be subject to further analysis. The data is registered in 5 databases: users (up to 10 users), products (up to 1000 products), weighments (up to 5000 weighments), tares (up to 100 tares), ALIBI memory (up to 100 000 weighments). Quick access to information There is two directions data exchange within the system thanks to a quick USB interface. New balances allow to import and export databases using USB pen drives. Direct access to functions and databases is possible from the level of keyboard. Database - a direct access to databasis Function - a direct access to the basic functions F1 do F4 - programmable function and navigation keys on the menu ALIBI memory The used ALIBI memory is a data secure area and allows to record up to 100 000 weighment records. It ensures security of constant data register in the long time period. Under-pan weighing Weighing instruments purchased after 15th February 2023 will allow under-pan weighing at any time after the purchase. All you need to do is just to order a dedicated hook. THBR 2.0 System Cooperation with THBR 2.0 System for ambient conditions monitoring.

MPS Y device consists of the electromagnetic module of high resolution and Y operation panel equippe (more)d with LCD. It has been designed to be easily integrated into customer-owned weighing systems, and therefore can be built either into technological line or inside weighing devices or laboratory equipment. The MPS Y allows to perform the measurements using the under-pan weighing method or a regular weighing pan. In case of the under-pan method the load is suspended beneath the module. By cause of high measurement accuracy, it is recommended to install the module inside customer's device (e.g. in a draft shield) in order to reduce the influence of ambient conditions on the measurement result. The MPS module comes standard with a dedicated power supply. Features: Brand new design of the electromagnetic mechanism housed in an aluminium enclosure, Readability of 0.01 g, Ease of adaptation to the required storage space, Internal adjustment, Various options of hardware configuration. The Y panel functionality is remarkable thanks to use of numerous interfaces: 2×RS232, 2xUSB type A, Ethernet, 4×IN, 4×OUT, Wi-Fi. MPS.Y can also be integrated with E2R Weighing Records and E2R PGC.

MA X2.IC.A moisture analyzers are hi-tech measuring instruments intended for quick determination of  (more)relative moisture content, dry mass content and other parameters in samples of different substances. MA.X2.IC.A series is equipped with innovative system: the drying chamber can be opened and closed automatically using button or proximity sensors. Such solution allows: Maintaining moisture analyzer clean – operator does not touch moisture analyzer’s housing. Removing any shocks caused by manual closing of the chamber – the chamber closes automatically and always with the same intensity. Achieving high repeatability of opening and closing the drying chamber. Enhancing drying process automation. Enhancing safety of operation by eliminating contact with hot components of drying chamber. Improving operation ergonomics. MA.X2.IC.A series features user-friendly colour touchscreen. Free configuration of the control panel can be done by means of hotkeys, customizable information fields and programmable labels. Drying process can be carried out for any temperature and – thanks to databases – particular drying process may be set for a specific product. Highlights of X2 Series moisture analyzers: Automatic opening and closing of the drying chamber 5” capacitive colour touchpad Modern interface Uncomplicated, intuitive operation Programmable display Drying profiles (standard, mild, step, fast) GLP/GMP printouts-reports Repeatable and customized applications Work optimization due to the use of halogen lamps Capacity and temperature MA.X2.IC.A maximum capacity ranges from 50g/0.1mg to 210g/0.1mg. Moisture content is measured with the 0.01% accuracy (0.001 % for samples bigger than 1.5g). The maximum drying temperature is 160˚C (there is an optional moisture analyzer with 250˚C maximum temperature). An additional element for moisture analyzers that improves their functionality is a water vapour permeability determination set used in tanning industry for determining hygienic properties of leather. Databases: Information system of X2 series moisture analyzers is based on 8 databases, allowing many users to operate product database comprising many samples. Collected measurements may be subjected to subsequent analysis. Collected data is registered in 8 databases: Products (up to 5000 products) Users (up to 100 users) Packaging (up to 100 packagings) Customers (up to 1000 customers) Drying programs (up to 200 drying programs) Drying process reports (up to 5000 drying process reports) Ambient conditions (up to 10000 records) Weighings (up to 50000 records) The results The results obtained using the moisture analyzer (the final result of the drying process): % M – the mass loss in %; displays the mass change recorded during the drying process, expressed as a percentage, % D – the dry mass obtained during the drying process, expressed as a percentage; the result is the portion of the sample that remains on the weighing pan after the moisture has evaporated, % R – the ratio of moisture content to dry mass, obtained during the drying process, expressed as a percentage; the result is the portion of the sample that evaporated during the drying process, g – the sample mass after drying. Interfaces USB interface ensures quick transfer and copying of any results of your work (measurements, reports, databases) to a computer or other moisture analyzer. Remote access to the moisture analyzer allows for online data management. Cooperation with E2R allows for external data management which in turn increases the efficiency and results to the maximum.

Maximum capacity: 810 g Minimum sample weight: 800 mg Readability: 10 mg Repeatability: 8 mg Lineari (more)ty deviation: 20 mg Setting time: 1.2 s Dimensions (WxDxH): 194 x 366 x 96 mm Weighing platform dimensions (WxD): 170 x 205 mm

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

Scilogex iPette Plus Electronic Pipettor, 0.5-10µlThe Scilogex iPette Plus Electronic Pipettor, 0.5- (more)10µl brings form and function together reducing the risk of user repetitive strain injuries. Featuring a clear LED display, easy tip ejection system, integral tip ejector for access into narrow tubes,the iPette Plus' lightweight design is comfortable for all users. The iPette Plus has a lithium ion battery for 8 hours of use (and no down time while charging), an AC power adapter, and auto power-off after 30 seconds of inactivity. The iPette can perform several functions including pipetting, mutli-dispensing, series dispensing, and mixing. Click Here to View Product Video INCLUDED: The Scilogex iPette Plus Electronic Pipettor, 0.5-10µl includes: - AC Adapter - USB Cable - Stand - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Gilson FC204 Fraction Collector, 200mL/min, 110/220VFeatures - Collect fractions by time, drop, or p (more)eak to suit all your LC applications - Choose the compact FC 203B for small-capacity collection or the FC 204 for large volumes and capacities - Accept a wide variety of collection vessels, including microplates, microvials, and tubes - In peak mode, collectors monitor a detector signal and identify peaks using either an adaptive-slope algorithm or a specified millivolt threshold - Up to 10 programmable time windows can be added for collecting only what you want, while discarding the column’s void volume, peaks of no interest, and equilibration volumes - Operate as stand-alone instruments with an easy-to-use keypad, or can be controlled through your PC via TRILUTION® LC Software The FC 204 Fraction Collector is the perfect solution for collecting fractions in liquid chromatography systems, catering to a wide range of flow rates from analytical to preparative. Paired with a peristaltic pump, it provides a cost-effective and easy-to-install tubing filling system, making it suitable for biosafety cabinets. With its small footprint and sterilizable flow path, contamination risks are minimized. This collector holds up to four racks, accommodating various sample formats, including up to 240 fractions in 13x100mm tubes or up to eight shallow or deep-well microplates. Choose between models with a 3-way diverter valve for flow rates up to 20 mL/min or 200 mL/min, depending on your requirements. For enhanced efficiency, an optional multicolumn adapter allows for simultaneous collection from up to 18 separate channels. INCLUDED: Gilson FC204 Fraction Collector, 200mL/min, 110/220V includes: - Gilson FC204 Fraction Collector - User's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

The UF-100 is a fully automated urine cell analyzer using flow cytometry method combined with fluore (more)scent dye and electric resistance method to detects casts. This unit is further automated tham UA-1000/2000. All the process from mixing and aspirating of sample to output of analyzed parameters are performed automatically. Analysis includes quantitative analysis and flagging. Quantitative analysis measures: RBC, WBC, epithelial cells, casts and bacteria count (concentration) in the unit of µL or view field. Flagging marks: Path, CAST (casts containing organized structures),  SRC (small round epithelial cell), YLC (yeast liked fungi cell), X’TAL (crystal), SPERM (spermatozoa) and outputs the flagging informarion (information of their presence). Analyzed results are displayed on screen and if required printed by card type printer of color printer, and they are transmitted to a host computer. Dimensions (WxHxD): 600 x 705 x 606 mm Weight: 68 kg