UF-1000i Urine Analyzer

LABORATORY FREEZER manufactured by B Medical Systems Design and comfort of use - 7” touchscreen with (more) easily accessible temperature display in the door handle - Minimal ice formation allowing for easy defrosting - NFC card/password protected door lock mechanism - USB port and SD card slot for easy export of -41°C setpoint data - Modular internal equipment - Easy access to lower drawers - High quality stainless steel and other materials for durability Accurate temperature control and 24/7 monitoring - Uniform and stable temperature distribution - Rapid recovery of the temperature even in case of frequent openings of the door - Intelligent automatic defrost technology that allows for a stable temperature during the defrost cycle - Automatic shutdown of the evaporator fans each time the door is opened to reduce heat transmission - Extended autonomy in the event of a power failure - Audiovisual alarm system with remote transmission via SMS or email - °B Universal software option for remote monitoring; reporting in accordance with FDA 21 CFR Part 11 and long-term archiving in combination with a data communication unit Energy efficient and eco-friendly performance - High cooling efficiency thanks to natural refrigerants in compliance with US SNAP and EU F-Gas regulations - Insulated interior doors, sealed gaskets, improved frame to minimize cold air loss and heat conduction - Frost prevention which reduces the pressure on the compressor - High quality stainless steel structure with antibacterial coating and injected polyurethane foam that provides high thermal insulation and storage capacity The B Medical Systems multifunction electronics of the "Precision line" series offers a complete alarm system, set point safety, battery backup, and many other control functions; compatible with the °B Connected solution for monitoring and data logging. Equipped with USB port and supplied with two keys. The main differences between the Precision line and Premium line series, in addition to the control panel, are the handle, ergonomic and patented by B Medical Systems for the premium line and the shape of the interior. Download the technical sheet in Italian or in English for all the details.

This Mefar Electromedical Dosimeter MB3 was removed from a university lab where it was surplus to re (more)quirements. The unit is in reasonably good cosmetic condition but has some marks from use. It powers up with pump sounding, we are unable to test it further at our facility.

This Randox RX Monza Automated Biochemistry Analysis System was removed from a university lab where  (more)it was surplus to requirements. The lab informed us that it was in full working order and had seen very little use. It has been powered up at our facility and is in excellent cosmetic condition. Accessories included:-Waste Bottle & tubeCoagulation Testing Supplement (photocopy)Instructional DVDLamp (M925-002)RS232 Cable (M701-705)Thermal Paper Roll (M200-170)Small black part (M100-946)Pack of 0.4ml tubes (M800-099)

Cytocentrifuge based on Hettich Universal 320. Includes 1626 angle rotor for 6 vessels. Vmax: 4,000  (more)rpm; 2,039 g. Includes only 2 vessels with capacity for 4 cytochambers (2 per vessel). Cytochambers (not included) sample capacity from 1 to 8 mL. Maximum capacity 12 cytochambers. More vessels can be independently budgeted to complete maximum capacity. Not refrigerated. Analog rotary control and digital display (10 programs). Emergency stop. Acoustic signal. Includes manual. The Hettich cytology system makes it possible to produce a high-quality cytology preparation from a wide variety of body fluids. With large volume cytology chambers it is possible to process sample volumes of 8 ml or 2 x 8 ml. This makes cell concentration superfluous in many cases. On the other hand, when using the two-step procedure, no cells are lost during sedimentation because the cytology chamber is tightly attached to the slide. Drying is carried out in a second centrifugation step when the cells are already attached to the slide. It also allows the specific preparation of dry or wet preparations. Ideal for urinalysis, abdominal & spinal fluids, cysts, biopsies, ascites, Pap tests, CSF, viral infections, bronchial secretions, pleura, pericardium fluid, fine and needle aspiration among others.

Thermo Scientific Hematocrit Fixed Angle Rotor Cat. #: 75003473 The Thermo Scientific Hematocrit Fix (more)ed Angle Rotor Cat. #: 75003473 is brand new and designed for use with Thermo Sorvall Legend Micro 17/17R/21/21R, Pico and Fresco 17/21, MicroCL 17/17R/21/21R Series Centrifuges. This hematocrit rotor supports speeds up to 14,800 RPM and RCF up to 16,800 x g, with a maximum capacity of 24 capillary tubes. INCLUDED: The Thermo Scientific Hematocrit Fixed Angle Rotor Cat. #: 75003473 Swing Bucket Rotor includes: - 1 Year Full Parts and Labor Warranty Thermo Scientific Hematocrit Fixed Angle Rotor Cat. #: 75003473 SpecificationsMaximum Speed14,800 RPMMaximum RCF16,800 x gMaximum Capacity24 Capillary TubesMaximum Radius8.5 cmCentrifuge CompatibilityThermo Sorvall Legend Micro 17/17R/21/21R, Pico and Fresco 17/21, MicroCL 17/17R/21/21R Series Centrifuges

Manufacturer: Luna (Phenomenex) Model: Luna® 5 µm C8(2) 100 Å, LC Column 150 x 3 mm Part Number: 00F (more)-4249-Y0 S/N: 605863-14 Stationary Phase: C8 with TMS endcapping Particle Size (µm): 5 Pore Size (Å): 100 Length (mm): 150 Internal Diameter (mm): 3 Solid Support: Fully Porous Silica Format: Column Separation Mode: Reversed Phase Recommended Use: Separation of very hydrophobic compounds USP Designation:L7 Used, good condition - fully functional.

Temperature range: Ambient +5°C to 100°C Temperature fluctuation (at 37°C): ± 0.1 K Temperature fluc (more)tuation (at 50°C): ± 0.1 K Temperature uniformity (at 37°C): ± 0.5 K Temperature uniformity (at 50°C): ± 0.9 K Warming up time (to 37°C): 70 min Warming up time (to 50°C): 115 min Recovery time after door was opened for 30 sec (at 37°C): 5 min Recovery time after door was opened for 30 sec (at 50°C): 6 min Maximum load: 70 kg Maximum load per shelf: 30 kg Capacity: 240 L Dimensions (WxHxD): 1035 x 825 x 745 mm Interior dimensions (WxHxD): 800 x 600 x 500 mm Weight: 93 kg

ElectroLab Dissolution Tester EDT-08LX Lab This item was removed from a university where it was surp (more)lus to requirement. The unit powers up and has been fully tested. It is in good working order. (Thermometer used for testing not included). It is in good cosmetic condition.

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

Benchmark Block, 96 x 0.2ml or 1 x PCR Plate The Benchmark Block (for 96 x 0.2ml or 1 x PCR plate) f (more)or use with the MultiTherm Heating Shaker or MultiTherm Heating and Cooling Shaker INCLUDED: The Benchmark Block, 96 x 0.2ml or 1 x PCR Plate includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty