Selecta Mediclave 12

Boekel Scientific 25515016 Cement Autoclave The Cement Autoclave consists of a welded ASME certified (more) steel cylinder with a bolted cover mounted on a sturdy supporting frame and enclosed in a heat insulated metal housing. The unit is designed to handle pressure in the 60-350 psi (0.4 -2.4 MPa) range and consists of steam vessel, pressure regulator, pressure gauge (0-600psi), air vent valve, power switches, and a safety pop valve set at 350 psi. All components are pressure tested and designed to meet the highest safety standards. The autoclave consists of a welded steel cylinder with bolted cover, mounted on a sturdy supporting frame and enclosed in a heat insulated metal housing. The steel cylinder is fitted with a high temperature gasket and a heavy cover held in place by 16 cap screws bearing upon washers. A T-Handle wrench supplied with the autoclave may be used to tighten the nuts gradually and uniformly to make a leak-proof assembly. The cylinder assembly is designed for a safe working pressure of 525 PSIG, or one and one-half the maximum working pressure. A safety valve set to release at 350 PSIG is provided for protection and modification is not recommended for safe operation. A dial pressure gage indicates the steam pressure in PSIG. Temperature readings are taken with a No. NP22507 thermometer ASTM #2F, which is placed in the thermometer well provided in the cylinder cover. An air-vent valve allows the escape of entrapped air during the early part of the heating period and releases any steam pressure remaining at the end of the cooling period. The autoclave is heated by two electric heaters attached to the cylinder. The heating unit is controlled from a switch panel on the control box. The control box houses the pressureregulator. A main toggle switch controls the entire electrical circuit including the automatic regulator. Separate on-off toggle switches, in series with pilot lights, control the current to the two heating elements. Switch functions are indicated on the switch panel.INCLUDED: The Boekel Scientific 25515016 Cement Autoclave includes: - Wrench, Thermometer, and 5 Gaskets - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Hirayama HICLAVE HG-80 Floor-Standing Autoclave with Automatic Lid, 85L, 208/220/240V Chamber Volume (more) 76L Sterilization Temperature Range 105ºC to 135ºC Chamber Dimensions 14.3 x 28.7 in(36.4 x 73.0 cm) Features - Automatic Lid Opening and Closing Button replaces a foot pedal. - Safety Interlock senses pressure and temperature and prevents lid from opening during a cycle, when the chamber is pressurized, and when the high temperature can cause boil over. - Programmable Auto-Start for running a cycle from 1 to 99 hours later and time for air removal before sterilization. - Large (15 liters) / Efficient Steam Condenser ensures no steam exhausts into the lab. The HG-113 and HG-133 incorporate a radiator for this. - Over-Flow Lamp indicates that the drain bottle is full and ready to be emptied. - Built-in Cooling Fan for faster post-sterilization cooling and shorter completion time. - Selectable Rate of steam venting after sterilization. - Twelve Programs Cycles can be stored. - Large Control and Display Panel improves functionality and shows the progress of the sterilization cycle. The Hirayama HICLAVE HG-80 is an advanced 85L floor-standing autoclave designed for efficient and safe sterilization. It features an automatic lid opening button to replace the conventional foot pedal and an automatic lid closing button for convenience. Its safety interlock prevents the lid from opening during cycles, ensuring safety when the chamber is pressurized or at high temperatures. The programmable auto-start can delay the start of a cycle by 1 to 99 hours. A large and efficient 15-liter steam condenser prevents steam from exhausting into the lab, complemented by a built-in cooling fan for rapid post-sterilization cooling. Users can select the rate of steam venting post-sterilization and program the air removal time before sterilization begins. Up to twelve program cycles can be stored for easy recall.The HG-80 boasts a large control and display panel, enhancing functionality and cycle progress visibility. Specifications include a chamber size of 76 liters (14.3" x 28.7"), a temperature range of 105°C to 135°C, a sterilization timer from 1 to 300 minutes, and an agar warming range maintainable from 45°C to 60°C for up to 24 hours to prevent coagulation. Additional features include a programmable air removal timer, selectable steam venting rates, and customizable temperature settings for lid interlock release for increased safety and flexibility. The unit is equipped with comprehensive safety features, including a circuit breaker with GFCI, low-water power cut-off, over-temp power cut-off, over-pressure power cut-off, safety valve, and a sensor for improper lid closing. The autoclave comes with a 15-liter water tank for the steam condenser and a 2-liter drain water bottle. It operates on 208/220/240V, 50/60 Hz, single-phase power, with a consumption of 3.8 kW, and ships at a weight of 255 lb (116 kg).INCLUDED: The Hirayama HICLAVE HG-80 Floor-Standing Autoclave with Automatic Lid, 85L, 208/220/240V includes: - Power Cord - Operator's Manual - 1 Year Manufacturer's Warranty

Scilogex SuperPette Autoclavable Pipettor, 30-300ulThe new SCILOGEX SuperPette fully autoclavable di (more)gital pipettors have an excellent ergonomic and ultralight design providing effortless, ergonomic, accurate and precise pipetting experience. In addition, the volume lock helps protect from accidental volume change. The clear digital display is centrally located, for the left- and right-handed users. UV and chemical resistant.Product Features - One handed volume adjustment and volume lock - Autoclavable, digital, ergonomic, ultralight, and accurate - UV and chemical resistant - Display is centrally located, for ambidextrous use. - Compatible with universal pipette tips of up to 1000 mL - Built with a calibration tool, so your lab can save time and cost by maintaining the pipettor in-house - Suitable for forward or reverse pipetting Click Here to View Product Video INCLUDED: The Scilogex SuperPette Autoclavable Pipettor, 30-300ul includes: - Two Year Manufacturer's Warranty

Tuttnauer 2840ELV Mobile Lab Line Vertical Autoclave Features - Take Advantage of Tuttnauer’s state- (more)of-the-art advanced control system with multi-color display - Intuitive Multi-color display for easier reading gives quick access to important information. Color is used to indicate the stage of the cycle - Safe Automatic pressure locking system. Door will not open when the chamber is over pressured - 316L grade high quality stainless steel chamber and door with electro-polish finish - The 2840EL-D autoclave comes with 8 factory set cycle programs that cover the diverse processing needs of most laboratories and research centers - Connect to a local network for use with RPCR Software for remote monitoring of up to 8 autoclaves - internal printer allows for the printing of Documents date, time, temperature and pressure Advanced multi-color control panel features intuitive method readouts in a multitude of languages. 316L grade high quality stainless steel chamber and door with electro-polish finish allows for long product life and ease of periodic cleaning The Tuttnauer vertical, top loading laboratory autoclave is available in chamber sizes from 23 to 165 liters. With higher capacity and better performance, Tuttnauer's ELV Laboratory line of fully automatic vertical steam sterilizers provides safe, economical and effective sterilization. The ELV models have an advanced microprocessor based control panel. The various applications can be carried out using the autoclave’s standard programs such as: Liquids such as nutrient media and buffer solutions, solid items, glassware and plastic, and waste sterilization. The autoclave automatically switches to standby mode if no buttons or switches are operated for four hours. Drain protection includes: exhaust drain is mixed with cold tap water that cools the exhaust’s temperature before reaching the drain. Features: - 23 to 160 Liter autoclave chamber volumes - Sterilizes liquids, solids, glassware and biohazard - Advanced microprocessor control panel - Independent temperature and pressure monitoring - Chamber constructed of 316Ti grade stainless steel - Accelerated cooling technology reduces cycle time INCLUDED: The Tuttnauer 2840ELV Mobile Lab Line Vertical Autoclave includes: - Power Cord - Operator's Guide - 3 Year Manufacturer's Warranty

This item has just arrived in our stock. Please enquire for further details.

BIOBASE BKQ-350SD-B large horizontal autoclave. Double door. Built-in steam generator. Capacity: 352 (more)L. Loading by car and trolley (included). Nine preset sterilization cycles, two test cycles and one auxiliary cycle: textile material at 121 ºC and 134 ºC, instruments at 121 ºC and 134 ºC, liquids at 121 ºC, plastic material at 121 ºC, glass and other solids at 121 ºC , Bowie-Dick test; leak test and program to be defined by the user. Camera and stainless steel cover. Automatic door closing. Illuminated indicators for door closing, running and end of cycle. Lifespan of about 10 years (20,000 cycles). Meets GMP requirements, CE marked. Water purification system, compressor and installation not included. Optional baskets and data-logging system. Camera size: 600 * 600 * 980mm. External size: 1286 * 1848 * 1240mm. Power consumption: 24Kw. Power supply: 380V, 50Hz.

Accuris F1008 Smart-Q 800 Quantitative Fluorometer Measurement Speed ≤ 6 seconds Excitation Waveleng (more)ths Blue: 460 ± 20nm and Red: 625 ± 20nm Emission Wavelengths Green: 525 – 570nm and Red: 670 – 725nm Features - Sensitive quantitation down to 0.1pg/ul ds DNA - Large color touch screen for programming and operation - Two models for single or 8-sample processing - Built-in reagent calculators for sample preparation - Compact and portable (11 x 6 inch footprint) The Accuris Smart-Q 100 and Smart-Q 800 Quantitative Fluorometers are designed for the precise quantification of DNA, RNA, and protein samples. By utilizing well-established methodologies for fluorescence detection, the Smart-Q Fluorometers provide higher specificity and enhanced accuracy compared to the traditional method of UV-absorbance detection. Accurate results are particularly crucial in workflows involving: Next Generation Sequencing, PCR, Transfection, Western blotting, and Immunoassays. The Smart-Q Fluorometers are engineered to achieve optimal performance with Accuris’ Fluorescent DNA Quantification Kits and assay tubes; however, they also maintain compatibility with a range of kits offered by various other suppliers. Each instrument is equipped with a 7-inch color touchscreen, featuring an intuitive, icon-driven user interface. Preprogrammed protocols allow for quick & effortless assay set-up. Results are quickly calculated and displayed in less than 6 seconds and saved to the instrument’s internal memory. All data can also be exported easily to a PC using a USB flash drive. The Smart-Q Fluorometers, along with their accompanying assay kits, are engineered for the precise measurement of fluorescent dye signals that are bound to targeted biological molecules. These specially formulated dyes exhibit selective affinity towards DNA, RNA, or proteins, and generate fluorescent signals exclusively upon binding to their respective targets. Both Smart-Q models include Blue and Red channels that allow for various fluorescent dyes to be used in nucleic acid and protein measurements. The Smart-Q Fluorometers incorporate advanced curve-fitting algorithms to establish calibration curves from standard samples of known concentrations. The concentration of an unknown sample, whether it be DNA, RNA, or protein, is determined by correlating its Relative Fluorescence Units (RFUs) with those of the standards employed during calibration. The measurement sensitivity for each type of assay is distinct and defined by its detection limits. INCLUDED: The Accuris F1008 Smart-Q 800 Quantitative Fluorometer includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Jouan BR 3.11 Refrigerated Centrifuge Lab This was removed from a university lab where it was surplu (more)s to requirements. It is in reasonably good cosmetic condition and powers up. Despite being in reasonably good cosmetic condition, this item is to be sold as Spares or Repairs due to its inability to maintain the set temperature and keep the lid open. Included: Jouan B 3.11 Centrifuge G=420 g, 4000 RPM Rotor & 11174179 Buckets Beckman Coulter SW32Ti Swinging Bucket Rotor

Potteau Plinth Drawer cabinet 12 Drawers L. Gray 1200x1050x2100

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW