Offering the best quotes for your research!
New and used scientific instruments
🚚 Shipping Worldwide 🌎
American Biotech Supply PH-ABT-NSF-26S 26 Cu Ft Pharmacy Solid Door Refrigerator
Product Description
General Features:
- 26 cubic feet gross volume with one solid, self-closing, right-hinged door
- Seven shelves (six adjustable, one fixed) with back guard rail
- White powder-coated steel exterior
- Foam-in-place high density urethane insulation (EPA compliant)
- Mounted on 3 1/2" swivel casters, two locking
- Shielded, switched LED interior lighting with balanced spectrum
- Forced air technology for airflow management (patent pending)
- External rear wall probe access port (3/4" diameter)
- Compatible with PYXIS®, Omnicell®, and Acudose Rx® access control systems
Temperature Control and Alarms:
- Parametric microprocessor controller with LED display, 0.1°C resolution
- Calibrated stainless steel display probe
- Visual and audible high/low temperature alarms compliant with NSF/ANSI 456 standard
- Remote state switching alarm contacts
- Temperature setpoint range fixed at 1°C to 10°C to maintain NSF/ANSI 456 compliance
- Temperature monitor device (TMD) compliant with CDC guidelines, includes 3 years calibration certification and buffered probe
Performance:
- Temperature uniformity ±0.7°C, stability ±0.5°C, max variation ±0.9°C
- Recovery to below 8°C within 8 minutes after door opening
- Temperature rise after 8-second door openings did not exceed 7.1°C
- Energy consumption 1.68 kWh/day; average heat rejection 2.62 kWh/day (372 BTU/h)
- Noise level 49 dBA or less
- Pull down time to 4°C nominal operating temperature: 30 minutes
- Tested at 22°C ambient using NSF/ANSI 456 compliant validation protocols
Electrical and Certification:
- Rated amperage 3 amps
- Power: 110-120V AC, 15A minimum, NEMA 5-15 plug
- UL, C-UL, ETL, C-ETL listed and certified to UL471 standard
- Certified to NSF/ANSI 456 Standard for Vaccine Storage including all testing scenarios
- Uses HFC-free refrigerant for environmental compliance and energy efficiency
Warranty:
- Two years parts and labor (excluding display probe calibration)
- Five years compressor warranty
Additional Information:
- Includes pharmacy refrigerator/freezer toolkit and temperature logs
- Multiple shipping options available including inside delivery and assembly (installation of casters and door handles)
This unit is engineered for indoor use only within ambient conditions of +18°C to +26°C (65°F to 78°F) and less than 70% relative humidity.
Item Stats
Product details
| OPERATIONAL ENVIRONMENT | INDOOR USE ONLY, +18°C TO +26°C (+65°F TO +78°F), <70% RH |
| STORAGE CAPACITY | 26 CU. FT. GROSS VOLUME |
| DOOR | ONE SWING SOLID DOOR, SELF-CLOSING, RIGHT HINGED, NON-REVERSIBLE, MAGNETIC SEALED GASKET, KEYED LOCK |
| SHELVES | SEVEN SHELVES (SIX ADJUSTABLE/ONE FIXED) WITH GUARD RAIL ON BACK |
| MOUNTING | 3 1/2" SWIVEL CASTERS (TWO LOCKING) |
| INTERIOR LIGHTING | SHIELDED, SWITCHED LED LIGHTING, FULL COVERAGE, BALANCED SPECTRUM |
| AIRFLOW MANAGEMENT | FORCED AIR TECHNOLOGY, PATENT PENDING |
| EXTERNAL PROBE ACCESS | REAR WALL PORT (3/4") DIA. |
| INSULATION | CABINET IS FOAMED-IN-PLACE WITH EPA COMPLIANT HIGH DENSITY URETHANE FOAM |
| EXTERIOR MATERIALS | WHITE POWDER COATED STEEL |
| ACCESS CONTROL | PYXIS®, OMNICELL® AND ACUDOSE RX® COMPATIBLE |
| GENERAL WARRANTY | TWO (2) YEARS PARTS AND LABOR WARRANTY, EXCLUDING DISPLAY PROBE CALIBRATION |
| COMPRESSOR WARRANTY | FIVE (5) YEARS COMPRESSOR WARRANTY |
| PRODUCT WEIGHT | 241 LBS |
| SHIPPING WEIGHT | 281 LBS |
| RATED AMPERAGE | 3 AMPS |
| POWER PLUG/POWER CORD | NEMA 5-15 PLUG, 8 TO 10 FT TYPICAL, CONFORMS TO UL471 REQUIREMENTS, VACCINE STORAGE POWER CORD WARNING LABEL |
| FACILITY ELECTRICAL REQUIREMENT | 110-120V AC: 15 A (MINIMUM) |
| AGENCY LISTING AND CERTIFICATION | CERTIFIED WITH THE TEMPERATURE PERFORMANCE REQUIREMENTS AS DEFINED IN THE NSF/ANSI 456 STANDARD FOR VACCINE STORAGE FOR ALL TESTING SCENARIOS. UL, C-UL, ETL, C-ETL LISTED AND CERTIFIED TO UL471 STANDARD, HYDROCARBON REFRIGERANT SAFETY. |
| INCLUDED ACCESSORIES | TEMPERATURE MONITOR DEVICE (TMD) COMPLIES WITH THE CURRENT CDC GUIDELINES, WITH 3 YEARS CERTIFICATION OF CALIBRATION, “BUFFERED” PROBE IN THE PRODUCT SIMULATED SOLUTION, MIN/MAX MEMORY, FIELD INSTALLABLE, AND VISUAL & AUDIBLE TEMP ALARM |
Documents
About QuestPair
Our Mission
QuestPair is Europe's leading platform for scientific equipment, connecting researchers and organizations with verified suppliers of both new and pre-owned laboratory instruments in the biotech and material science industry. Our aim is to make the procurement of scientific instruments more efficient, cost-effective, and reliable, so that laboratories can focus on advancing science rather than searching equipment and negotiating deals.
Why Choose Us
Founded by scientists for scientists, we understand your challenges. Our AI-powered platform offers transparent pricing, verified quality, and expert support, ensuring you find the perfect equipment for your research needs.
Verified Quality
Every piece of equipment undergoes thorough verification by our expert team, ensuring reliability and performance.
Cost Efficiency
Access both new and premium pre-owned equipment, saving up to 40% without compromising on quality.
Expert Support
Our dedicated team provides personalized guidance throughout your equipment procurement journey.
Ready to Transform Your Research?
Join thousands of biotech scientists who trust QuestPair for their equipment needs.
What customers think about QuestPair
Brilliant service. Everything arrived and was exactly as expected
Jon Welburn
Great customer service! Got me great options for the equipment I was looking for and in a timely manner.
Pamela
Space Lab Technologies, LLCHarm is very responsive to help me find the right equipment. The product I received is in a good condition.
Ph.D. Hsin-Wen Liang
Northeastern UniversityFrom €5,686.64*ex. VAT
In Stock
Get a quote within one business day
Verified equipment
Trusted warranties & returns
Safe payment and fast delivery
Didn't find what you're looking for?
Our sales team specializes in sourcing custom and hard-to-find products to meet your exact specifications. Submit a request for a tailored quote.
Frequently Asked Questions
Is this equipment new or refurbished?
How long does shipping take?
What about warranty and returns?
Why request a quote?
Need help choosing the right tool?
- Accurate policy information specific to your chosen product
- Clear understanding of warranty coverage and terms
- Detailed return policy explanation
- Transparent shipping options and costs
Customer Service
Here to help you with: Product Inquiries, Shipping & Support, Technical Support, Business Inquiries and Press.
We are available to assist you Mon-Fri, 10am - 5pm CET.