Kaiser Fototechnik 2403 ProLite Basic 2 Light Plate 5000 K Light Area 30 x 22 cm

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Job Lot of Luxonic LED Lighting Strips. These were removed from a university lab where they were sur (more)plus to requirements. The items are all in good condition and have not been tested. 6 x Boxes:-Ref numbers on boxes:-S25416/1SLS66/2R/1400/50.1W/DIM8ZL900389 Box 1 - 4 x 35W SL370090 143cm LongBox 2 - 2 x 50W ZL900389 140cm LongBox 3 - 3 x x 35W SL370090 143cm LongBox 4 - 3 x x 35W SL370090 143cm LongBox 5 - 3 x x 35W SL370090 143cm LongBox 6 - 3 x x 35W SL370090 143cm Long 2 x Boxes Labelled LED PlugsPN - LF500043FX-SC08-G2-CT2PF-0500 14XFS20

This Optikinetics Opti GoBoShow Projector  was removed from a university lab where it was surpl (more)us to requirements. The item's cosmetic condition is very good. It is fully operational with the lamp functioning correctly.

Christie Mirage Model S+4K Commercial Projector This was removed from a university lab where it was  (more)surplus to requirements. The unit powers up but is displaying with a green tinge. We were unable to get this to change. The lamp has run for 780 hours. It is sold for spares/repairs.

A programmable laboratory oven with multiparametric microprocessor with the possibility of memorizin (more)g 4 programs with 8 segments each. Fine temperature regulation, clear and complete display, top safety class, front regulation of the pipe on the back for exhaust fumes. MATERIALS:     External structure in steel painted with anti-acid epoxy powder     Inner chamber in 18/8 stainless steel     Ergonomic handle, easy to use and robust STANDARD:     PID thermoregulator with multi-display and adjustable temperature up to 300°C     4 storable programs with 8 segments each     Setting up ramps in °/min     2 shelves     pipe on the back for exhaust fumes with front opening/closing adjustment device     10 mm hole on the upper side     Safety class DIN 3.1, the highest     IP protection: 42 INSTRUMENT SAFETY SYSTEM The oven has an independent electronic safety system. The electronic circuit DOES NOT depend on the main thermoregulator and will work even if the main board is broken. If the temperature exceeds the set point by a certain number of ° (set by the user), the LED will light up and the oven will continue to operate at the safety temperature. Programmable OVEN STF-NR FALC

The STX44-HRSA is designed for integration where the instrument is located on the floor. The STX44-H (more)RSA incubators have their handling and climate controls on the lower part of the instrument. The robotic access Gate is located in the upper part of the housing. The SA configuration does not require table space and an SA configured StoreX can easily be put in position without the need of placing the unit on a table. Application: Humid MultiRange Temperature Range: 4 – 50/70°C (depending on humidity) Temperature Stability: ± 0.3°C Relative Humidity: 90 – 95% Communication: RS232 V24, 9600 Baud, ASCII Dimensions (WxDxH): 485 x 514 x 1230 mm Transfer height: 1000 mm Plate capacity: Microtiter 44, Deep well 18, Nanoliter 84

This Agilent Technologies HPLC 1200 Series G1311A Quat Pump Quaternary was removed from a university (more) lab where it was surplus to requirements. The item is in good cosmetic condition and powered up, as seen the item is missing the front door panel. We are unable to test this item further at our facility.

Labconco RapidVap N2 Evaporation System with RS-232 LinkThe RapidVapN2 Evaporation Systems offer a m (more)ore efficient, automatic alternative toKuderna-Danish and rotary evaporators and may be used with a broad range ofaggressive chemicals. In RapidVap N2 Systems, a stream of nitrogen or dry gasis directed downward onto the surface of the sample. Nitrogen blow down reducesthe partial pressure directly over the liquid to speed evaporation and helpremove the solvent as it evaporates. Nitrogen may be programmed for 2, 4, 6 orall 8 tube locations. Vortex motion and dry heat may also be applied to furtheraccelerate processing. The block holds eight large samples, up to 450 milliliters each, making itefficient for environmental and residue testing. An accessory block that holdseight 170 milliliter tubes suitable for solid phase extraction is alsoavailable. In many of these applications, the samples should not go to dryness.The unique Cool-Zone block and tube design significantly reduces theevaporation rate after end point is achieved. The Cool-Zone insulates thesamples and allows the researcher adequate time before the samples reachdryness to remove them or to perform solvent exchange procedures. Alarms thatsignal when timed end point has occurred and when the RapidVap senses that theprocess is nearing completion allow for unattended operation.INCLUDED: The Labconco 7910010 RapidVap N2 Evaporation System with RS-232 Link, 115V, 50/60Hz includes: - Exhaust Hose - Clamp - Sample Tube Caps x 8 - Heat Transfer Grease - RS232 Cable Assembly - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

IKA C-MAG HP 4 Hot Plate Volume Max. 5 L Plate Dimensions (mm) 100 x 100 Working Temperature 50 - 5 (more)00 °C Features - Fixed safety circuit of 550 °C - Hot Top indicator >hot surface warning to prevent burns! - Exact temperature setting via digital display (LED) - Digital error code display - Elevated control panel for protection against leaking liquids The C-MAG HP 4 hotplate features a durable ceramic glass surface with excellent chemical resistance. It has a fixed safety circuit of 550 °C, a Hot Top indicator for burn prevention, and an exact temperature setting via a digital LED display. Designed with an elevated control panel to protect against leaks, it offers a single heating point with a 250 W output, heating from 50 to 500 °C, and a turning knob for control. Compact and lightweight, it measures 150 x 105 x 260 mm and weighs 3 kg, suitable for up to 5 liters of volume. It operates at 120 V, 50/60 Hz, with a power input of 255 W, and meets IP 21 protection standards. Click Here to View Product Video INCLUDED: The IKA C-MAG HP 4 Hot Plate includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty ( + Additional Free 1 Year Warranty Extension with IKA Registration) IKA C-MAG HP 4 Hot Plate Specifications Number of heating points1Heat output250 WHeating temperature range50 - 500 °CHeat controlTurning knobSet temperature resolution10 ±KVolume max.5 l Heating rate heating plate2.5 K/min Set-up plate materialceramic Set-up plate dimensions100 x 100 mmDimensions (W x H x D)150 x 105 x 260 mmWeight3 kgPermissible ambient temperature5 - 40 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 21Voltage230 / 120 / 100 VFrequency50/60 HzPower input255 WComparison of ModelsSpecificationsC-MAG HP 10C-MAG HP 4C-MAG HP 7Heat Output (W)15002501000Heating Temperature Range (°C)50 - 50050 - 50050 - 500Volume Max. (l)15510Heating Rate Heating Plate (K/min)52.55Set-Up Plate MaterialCeramicCeramicCeramicSet-Up Plate Dimensions (mm)260 x 260100 x 100180 x 180Dimensions (W x H x D) (mm)300 x 105 x 415150 x 105 x 260220 x 105 x 330Voltage (V)230 / 120 / 100230 / 120 / 100230 / 120 / 100.comparison-table tr td:nth-child(3) { background-color: #fffacd; }