Thermo Nicolet Evolution 300 UV/Vis Spectrometer Spektrometer 190-1100nm Flow

4 adapters 12x1.5 / 2ml for SIGMA 13104 / 13117 buckets For SIGMA laboratory centrifuge with rotor 1 (more)1133 Reference: 17008 For 4 x 12 tubes of 1.5/2ml

Orbit Marine AL-7100-SDU-MK2 Servo Driver Unit This was removed from a university lab where it was s (more)urplus to requirements. It is in good cosmetic condition but has not been tested at our facility.

Bioquell H202 Decontamination System Z-2 & R-10 This was removed from a university lab where it (more) was surplus to requirements. The lab confirmed they were fully working prior to removal. Included are the following; Bioquell Z-2Model no. TD068-0000-230VSN - 201104BZ21160(5L Container inside is empty)Hours run - 59A warning for calibration due came up, was due 14/07/23 Bioquell R-10Model no. TD060-5900-230VSN - 201106BR1253 Both units power on and are in good used cosmetic condition.

This listing is for a Sartorius Practum 6101-1S Balance. The unit is in full working condition and  (more)is ready for immidate realese. The laboratory balance that enables you to start weighing right! Unmatched reliability attained by the Sartorius weighing technology featuring quality made in Germany. Innovative housing design and rugged weigh cell for easy weighing, whatever you weigh. Outstanding connectivity without the need for any additional software. Just connect the balance to your computer and transfer your data directly to a Microsoft ® Excel spreadsheet, for example. If you need to print your results, the laboratory balance’s automatic detection of the Sartorius standard printer Practum® - the laboratory balance that enables you to start weighing right! Unmatched reliability attained by the Sartorius weighing technology featuring quality made in Germany. Innovative housing design and rugged weigh cell for easy weighing, whatever you weigh. Outstanding connectivity without the need for any additional software. Just connect the balance to your computer and transfer your data directly to a Microsoft® Excel spreadsheet, for example. If you need to print your results, the laboratory balance’s automatic detection of the Sartorius standard printer YDP40 will make it easy. The sturdy draft shield will stand up to daily rigors, even to use by inexperienced operators. Moreover, it can be completely disassembled to conveniently clean the glass parts in a dishwasher.

Safety and resistance for your laboratory OHS advance is designed to guarantee the highest safety st (more)andards. - The durable watertight housing and IP 54 protection rating ensure durability even in the most aggressive environments. - Built-in safety alarms for overload, over temperature and over current will maintain performance over time by stopping agitation - The safe operation of the start and stop knob and the lock key prevent unintentional starts and changes in working conditions. - The built-in vibration sensor with different sensitivity levels will stop the operation and inform you to make sure your OHS is stable and properly fixed. Continuous operation guaranteed and supported by a 3 year extended warranty. First-class performance OHS Advance is the ideal solution for demanding applications operating with viscosities up to 50,000 mPa. The electronically controlled brushless motor of the OHS 60 Advance agitates up to 40 l (H2O) with a maximum torque of 60 Ncm and guarantees maximum durability. SpeedServoTM torque compensation technology maintains constant speed by automatically adapting to changes in viscosity. Set the OHS 60 Advance electronic speed control from 30 to 2000 rpm. Constant Torque at Any Speed The powerful brushless motor and microprocessor control ensure unprecedented performance, highlighting the difference between a conventional rod stirrer and VELP OHS Series rod stirrers. The torque remains constant at any speed, even at maximum. Having a constant torque is a very important parameter for the reproducibility of the analyzes. SmartChuck Technology: Inserting or Removing an Auction Has Never Been So Simple! How often do you have to remove or replace the stirring rod using two hands and see the rod fall into the liquid? SmartChuck ™ technology makes this activity quick and easy with the use of one hand and without special accessories. Two simple movements allow you to unlock the protection ring and remove or replace the stirring rod. In the event that the protection ring is opened during the analysis, the instrument stops shaking, showing a safety message on the display. Intuitive and precise control panel The intuitive 3.5 ”OHS Advance TFT display will guide you to precisely set your working conditions and achieve reproducible results. Show key information at a glance. Real-time information on viscosity variation with a resolution of 1 Ncm. Interact with OHS Advance from the real-time graph showing speed, torque and temperature of your test. The OHS Advance works without surveillance thanks to the timer that can be set from 1min to 99.59h. Ideal operating methods can be defined and programmed for demanding tasks where ramps and interval operations are required. Temperature under control OHS Advance is supplied with a Pt100 temperature probe included in the package. Constantly monitor the temperature of your reaction and set the meter to slow down or stop activity if the temperature reaches a defined value. This is important when you want to prevent exothermic reactions from interfering with your analysis! THE BENEFITS OF OHS ADVANCE CONNECTIVITY The OHS Advance is the only rod stirrer to offer the ability to control and monitor processes via Wi-Fi connection to VELP Ermes and via USB. The VELP Ermes cloud platform allows you to control the OHS Advance from PC, smartphone and tablet through a simple and intuitive web interface. With this platform designed by VELP it is possible to activate the shaking, set a timer, set a method (among those saved on the device), download and share reports with a click. For applications in the pharmaceutical, biotechnology and life science sectors, VELP Ermes can manage OHS Advance localized in clean rooms or other controlled environments, without the need for lengthy safety procedures. With the OHS / CotrollerSoftTM software, VELP offers the possibility to all laboratories that cannot benefit from cloud services, a valid alternative with USB connectivity. The OHS allow you to choose between two different control panels, Digital or Advanced, to better suit the needs of your laboratory. - Digital: precise speed settings; torque indicator; integrated timer. - Advanced: all information at a glance; intuitive; real-time graphs. Very easy to use and comfortable tools. Intuitive control panel equipped with Smartchuck: operations and rod change with one hand, effortlessly. - Mandrel opening: Ø from 1 to 13 mm - Stirring rod diameter for Pass-Through: up to 8.5mm Velp products guarantee you peace and security within your laboratory. - Safety button clearly visible from the front - IP54 protection - Integrated safety sensors CONTROL PANEL OF OHS ADVANCE MODELS A - LCD display B - Display keys C - Stirring speed kond D - Lock key E - Main switch F - Smart Chuck

Gilson Classic Starter Kit, 4 Pipette Kit, P2, P20, P200, P1000 The PIPETMAN® Classic line is one of (more) the world standards in pipetting and offers a wide range of continuously adjustable, air-displacement pipettes with legendary accuracy and precision. The PIPETMAN Classic 4 Pipette Kit provides four pipettes covering volume transfers from 0.2 to 1000µL, which will tackle most laboratory needs. Made of highly resistant materials like PVDF and stainless steel, PIPETMAN Classic offers uncontested durability and reliability. Built-to-last, it is the economical solution for years of pipetting INCLUDED: The Gilson Classic Starter Kit, 4 Pipette Kit, P2, P20, P200, P1000 includes: - P2, P20, P200, and P1000 Models - DL10, D200, D1000 PIPETMAN DIAMOND Tipacks - Four SINGLE™ Pipette Holders - Four PIPETMAN Comfort Handles - The Gilson Guide to Pipetting - The Two-minute Inspection Poster - 1 Year Manufacturer Warranty Gilson Classic Starter Kit, 4 Pipette Kit, P2, P20, P200, P1000 SpecificationsAdjustable or Fixed VolumeAdjustable VolumePipette TypeManual Air DisplacementPipette Models IncludedP2, P20, P200, P1000Pipette Tips IncludedDL10 TIPACK, D200 TIPACK, D1000 TIPACK Pipette RangePIPETMAN Classic Number of Channels1Pack Size1Pack Size UnitPackRequest a Formal Quote

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW