Pyrosequencing Model PSQ 96MA Lab

Qiagen Pyromark Q96 ID System Lab This item is sold on behalf of a client. It is surplus to requirem (more)ents. It is in good cosmetic condition and full working order. It is available for collection from London, UK, but we may be able to offer shipping for an additional fee.The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

This Pyrosequencing PSQ96MA Pyrosequencer was removed from a university lab where it was surplus to  (more)requirements. The unit powers up and the lab believed it was in full working order prior to removal. It was not tested further at our facility. It is in good cosmetic condition but one of the feet has sheared off at the screw. It has some minor marks from use. Included are; Pyrosequencing PSQ96 InstrumentModel - PSQ96MASN - 60-0000 000335 N12Block - 96 x 0.2mlUnit dimensions - L60 W51 H49cm Accessories/consumables:-Pyrosequencing Vacuum Prep Stand (SN - 60-0204 000020 P11)Biotage Pyromark Vacuum Prep Worktable (REF - 60-0237)PSQ96 Reagent Cartridge (2 in box)PSQ96 Reagent Cartridge (3 in box)13 x Vacuum Prep Tool Troughs2 x 96 well tube holdersVacuum Prep Tool Filter ProbesQiagen PyroQ96 IPC Hard drive PCA6781 (Sealed in box)

Life Technologies Ion Torrent PGM Sequencer, One Touch 2, One Touch ES System This Life Technologies (more) Ion Torrent system was removed from a university lab where it was surplus to requirements. The system powers up and is in good cosmetic condition with minor marks, no further testing has been done. We couldn't test the lid locking/holding mechanism since the software couldn't be accessed. The system consists of the following: Life Technologies Ion Torrent PGM Life Technologies Ion OneTouch ES Enrichment System Module-The item successfully powers on, and upon pressing the start/stop button, the arm initiates movement. No further testing was conducted. Life Technologies Ion Torrent OneTouch 2 Instrument Next Generation Sequencing -The item powers on, and boots to user creation. When attempting to create an account, a "read-only" message appeared.

Life Technologies Ion Torrent PGM Sequencer, One Touch 2, One Touch ES System This Life Technologies (more) Ion Torrent system was removed from a university lab where it was surplus to requirements. The system powers up and is in good cosmetic condition with minor marks, no further testing has been done. The system consists of the following: Life Technologies Ion Torrent PGM Life Technologies Ion OneTouch ES Enrichment System ModuleThe device powers on and when the start/stop button is pressed, the arm begins to move. No further testing has been done. Life Technologies Ion Torrent OneTouch 2 Instrument Next Generation Sequencing The device has been turned on and the system is booting up. I used the touchscreen to open the lid, which successfully opened. Life Technologies Ion Torrent Ultra-Turrax Tube Drive for PGM (Personal Genome Machine) by IKAThe device has been turned on successfully. I was able to adjust the timer settings as required.

This system was removed from a lab as it was no longer required. It was in full working order prior  (more)to removal from the lab. An engineer from Pacific Biosciences prepared the system for removal from the lab, including removing all the systems cladding, but unfortunately had to cut a few cables between the main unit and the environmental chamber. Whilst the blade server is included with the system, it has been wiped, so software may need reinstalling if you intend to use the system in full again. Strangely the information plate on the back of the unit just says 'PacBio RS' and not 'PacBio RS II' as would be expected, but the lab called it an RS II, and the cladding on the front says RS II, so we presume this is RS II. The engineer said that whilst getting the unit up and running again might be difficult, there is an enormous value of the system in parts. Apparently the camera part alone cost £125k. We have not removed any parts from the system whatsoever.

This listing is for a Eppendorf 5702R Refrigerated Centrifuge The range of Eppendorf 5702 general p (more)urpose, low-speed centrifuges has been designed specifically to meet the needs of mid-throughput clinical research and cell culture laboratories. These centrifuges are very compact, so that they fit easily on the lab bench, as well as extremely quiet.

This Night Owl EG&G Berthold Molecular Light Manager was removed from a university lab where it  (more)was surplus to requirements. The item powers on and is in a reasonably good used cosmetic condition but one of the connection ports on the back is damaged. The UV Light works and white light can be seen powered on through the back.  There is a bag of loose parts inside. Internal dimensions - D36.5 W52 H46cm The lab said it wasn't working but didn't give any more details. We assume it is down to the damaged connection port. It is sold for spares/repairs.

Mutek Infrared Laser System - TLS 150, 0LS150, KMPV50-0.5-J2 Lab The lab confirmed that the sys (more)tem has not been used for 10 years but was working prior to being put away into storage. Mutek Infrared Laser System The Item Powers on and is in Good Condition with Some WearModel - 0LS150 Mutek Infrared TLS 150Model - TLS 150 Kolmar Technologies Infrared Detector Model - KMPV50-0.5-J2 Kolmar Technologies Infrared Detector PSU Has no Information Plate

This BMG Lab Technologies Fluostar Galaxy Microplate Reader was removed from a university lab where  (more)it was surplus to requirements. The unit powers up but would not connect to a PC (not included) when we tried to test it. Other units would connect to this same PC, so we are sure it is the unit itself at fault, and not the PC. It is in otherwise good cosmetic condition with minor marks but is sold for spares/repairs.

CSP IT-10 Infinity Turbine Organic Rankine Cycler This was removed from a university lab where it wa (more)s surplus to requirements. Model - IT-10SN - IT10-0025 The item is in a reasonable, used cosmetic condition but is unable to be tested.

Ohaus HB6DG Digital Dry Block Heater, 6 Block Temperature Range Ambient +5°C to 120°C Control Digita (more)l Uniformity Within the Block ± 0.1°C at 37°C Features - Offers accurate and fast sample heating with PID microprocessor temperature control - Supports six interchangeable modular blocks with over 40 configurations - Tool-free block setup for easy operation - Enhanced tube-to-block contact for maximum heat retention and efficiency - Robust painted steel housing for durability - Equipped with a clear LED display and easy-to-use touchpad controls with independent displays for temperature and time - Timer from 1 second to 9,999 minutes - Includes a unique single point calibration feature to match the block heater's display to a known external temperature standard for 3 temperature setpoints - Versatile utility across various laboratory applications - Designed for long-lasting performance in demanding settings The Ohaus HB6DG Digital Dry Block Heater offers accurate and fast sample heating with PID microprocessor temperature control, making it perfect for various applications that demand consistent heating. This heater accommodates six interchangeable modular blocks, providing over 40 configuration choices to suit different needs. The modular blocks are designed for effortless setup without requiring tools, ensuring optimal tube-to-block contact for superior heat retention and efficient operation. The HB6DG features a robust painted steel housing and is equipped with a clear LED display, easy-to-use touchpad controls with independent displays for temperature and time, and an audible alarm, enhancing usability and precision. This Dry Block Heater also includes a unique single point calibration feature to match the block heater's display to a known external temperature standard for 3 temperature setpoints, making it a superior choice for modern lab environments.Please Note: Blocks are sold separately and are REQUIRED for operation. Please view the Accessories tab. INCLUDED: The Ohaus HB6DG Digital Dry Block Heater, 6 Block includes: - Support Rod Holder with Locking Knob - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty