Orbit Marine Division AL-7100-SDU-MK2 Servo Driver Unit Lab

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

An economic laboratory oven but complete with the necessary adjustments and safety devices. Fine tem (more)perature regulation, clear and complete display, top safety class, front regulation of the rear air inlet. Forced ventilation for a better temperature distribution and faster reaching of the set point. MATERIALS:     External structure in steel painted with anti-acid epoxy powder     Inner chamber in 18/8 stainless steel STANDARD:     PID thermoregulator with adjustable temperature up to 300°C     2 shelves     Rear 45 mm outlet with front device for adjusting opening/closing gap.     Safety class DIN 3.1 Microprocessor controlled Safety class DIN 3.1 (top DIN class) Laboratory Oven with forced ventilation STE-F 52 FALC

This Matrx by Midmark VIP 3000 Isoflurane Vaporiser was removed from a university lab where it was s (more)urplus to requirements. The unit has not been tested but is in good cosmetic condition and includes its original packaging.

This Beckman Coulter Biomek Fxp System with Software & Accessories was removed from a university (more) lab where it was surplus to requirements. All units are in good used cosmetic condition but they do have various signs of general use. The system consists of: 1 x Beckman Coulter Biomek Fxp CAT No A31842.The unit powers up and both lights illuminate Green. It was not tested any further.The original front-top guard/cover is included but one edge is damaged. The hinges and hardware to attach it are not included. 1 x Beckman Coulter Biomek Stacker Carousel CAT No 148520.It comes with:2 x Stacker 10 hotels.2 x FX Stacker 10 hotels.1 x Stacker Carousel Pendant.The mounting plate to connect it to the Fxp is included.It also comes with a spare Microscan, operational condition is unknown. 1 x Lenovo PC with monitor, mouse & keyboard.It has the Biomek Version 3.3 software installed. 1 x Jun-Air 1795001 Compressor. The system also includes quite a few plates and consumables and various connection cables.

Mini biosafety cabinet Class II A2. Small size to save space 70x65x123cm (LxFxA). Turbine centrifuge (more) with adjustable speed. Speed of upward flow 0.53±0.025 m/s, descending 0.33±0.025 m/s. air Recirculation 30/70. HEPA filter H14. Front window motorized. Interior of stainless steel. White light and UV germicidal. Two outlets inside. Remote control. LCD Display with indicators of air flow, temperature and humidity of the work area, pressure filter, hours of the UV light, hours of use of the filter. Alarms air flow incorrect, replacement of filter and height of the front window. Optional: support structure (+250 €).

Denley Spiramix 10 Roller Agitator. Rocking action agitator with 10 30mm diameter x 310mm long rubbe (more)r coated rollers for complete mixing of all liquid-solid suspensions with minimal aeration. Speed 50 rpm. Highly efficient rocking and rolling action Overall size 460mm x 409mm x 100mm high. The Denley Spiramix 10 roller shaker is a high-quality laboratory tool that ensures efficient and homogeneous mixing of liquid samples. With its robust and durable design, this roller shaker is ideal for use in research laboratories, pharmaceutical and chemical industries. Its adjustable stirring speed and non-slip roller platform allow for precise and safe operation. The Denley Spiramix 10 roller shaker is a reliable choice for accurate and reproducible results in your experiments and mixing processes.

Hersteller: Integra Biosciences Modell: Fireboy Plus Sicherheitsbunsenbrenner mit Gaskartuschenadapt (more)er für Campingaz CV 360 Art.Nr. (Bunsenbrenner): 144 000 Art.Nr. (Gaskartuschenadapter): 144 050 Beschreibung: Die Arbeit mit offener Flamme ist Bestandteil vieler Routineanwendungen in biologischen und chemischen Laboren. Doch die Gefahren im Umgang mit Spiritusbrennern, gewöhnlichen Gaskochern oder Standard-Bunsenbrennern, die am Gassystem des Gebäudes angeschlossen werden. Der Sicherheits-Bunsenbrenner Fireboy wurde entwickelt, um diese Gefahren zu beseitigen. Er ist schnell und sicher – Sie brauchen weder Streichhölzer noch ein Feuerzeug. Der Fireboy plus ist ein automatischer Bunsenbrenner zum Ausglühen und Abflammen von Labormaterialien aus Glas oder Metall. Eigenschaften: - Einfache Handhabung- Unabhängig und mobil- Klein und kompakt Technische Daten: - Düsen: 3, für Propan-/Butan-, Stadt- und Erdgas- Nennwärmebelastung: 1kW- Stromversorgung: Netzteil, 240V, 50/60 Hz, 12V, 5W- Abmessungen (BxTxH): 90mm x 180mm x 70mm Lieferumfang: - Integra Biosciences Fireboy Plus Sicherheitsbunsenbrenner mit Gaskartuschenadapter für Campingaz CV 360- Netzadapter Das Gerät ist in gutem Zusatand, 100% auf Funktion getestet und vollkommen einsatzbereit.

This as removed from a university lab where it was surplus to requirements. The unit powers up but d (more)oes not function further. It shows "E2prom wrong! unable to run main program". We were advised it was not in working order prior to removal. It is sold for spares/repairs.

E2-class mass standards represent an exceptional standard of precision in mass measurement. Classed  (more)as E2 metrology class, they are characterized not only by their high accuracy, but also by their versatility for use in laboratories, industry or scientific research. E2 class standard: stainless steel wire Nominal value: 5 mg Material: stainless steel High Precision of measurements The mass standard is the foundation of accurate mass measurement, as it affects the quality and reliability of results in many areas. Its role in maintaining uniformity and in meeting measurement standards is crucial, making the mass standard an indispensable metrology component. Stability over Time An important feature of E2 class mass standards is their ability to maintain measurement stability over the long term. It is this stability that makes standards of this class highly valued in laboratories and industry. Calibration and Strict Quality Control Systematic calibration is a key element in maintaining E2 class standards. This process involves comparing the mass standard with other standards of known mass to confirm and maintain measurement accuracy. Versatility of Applications E2 class mass standards are designed for a wide variety of applications. They can be used in analytical laboratories, the pharmaceutical industry, scientific research or other areas requiring precise mass measurements. Applications 1. Analytical Laboratories In analytical laboratories, where precise and repeatable measurements are crucial, E2 class mass standards find their wide application. 2. Pharma Industry In drug manufacturing, where quality control plays a key role, E2 class mass standards are indispensable in the calibration process of balances. 3. Scientific Research In scientific research, especially in areas requiring the utmost precision, E2 class mass standards are an indispensable tool for obtaining reliable results. 4. Metrology Industry In metrology laboratories, E2 class standards provide a reference point for evaluating and testing other measurement standards. E2 class standards are synonymous with excellence in mass measurement. Their versatility and high precision make them an indispensable tool in laboratories around the world and improve the quality and reliability of mass measurement results.

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

IKA VACSTAR control Final pressure without gas ballast 2 mbar Pump rate max. (50/60Hz) 22 l/min Inpu (more)t pressure 2 - 1030 mbar Features - Powerful 4-chamber membrane vacuum pump, chemical-resistant and low-maintenance - Integrated vacuum controller with a detachable WiCo controller for versatile operation - Selection of operating modes from automatic to manual, including pumping, evacuation, and cleaning functions - High suction performance at 22 l/min with a minimum pressure of 2 mbar - Achieves a final pressure of 2 mbar without gas ballast, featuring 4 suction levels - Boiling point detection and a comprehensive solvent library for specific applications - Features a venting valve, condensate trap, and emission condenser for enhanced safety - Timer function for scheduled operations with a noise level of 54 dB(A) at low pressure Separation, filtration, removal: The VACSTAR dry 4-chamber membrane vacuum pump is powerful, resistant to chemicals and low-maintenance. VACSTAR control is the ideal system with its integrated vacuum controller and removable display. The controller offers a suitable mode for the desired process: from automatic to manual operation, right through to pumping or an evacuation and cleaning function. Integrated vacuum controller with removable controller (WiCo): Depending on the application, you can easily select your operating mode either by using the intuitive operator menu or by remote control.For additional safety for users and environment, we recommend using the VSE 1 vacuum safety emission condenser, which prevents solvents from being released into the room air. The VSE 1 is available as accessory. INCLUDED: The IKA VACSTAR control includes: - WiCo VACSTAR control - Vacuum hose (1 m) - WH11 - OS 1.0 WiCo power supply unit - USB Cable - USB A to Micro-B, 2 m - USB A-B Cable - Screw driver - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Adam Equipment EAB 514I Equinox Analytical Balance, 510g, 0.0001g Capacity 510g Readability 0.0001g (more) Repeatability 0.35mg Features - Large, responsive 5’’ 800x480 pixel touch-screen display - Level indicator and adjustable feet ensure proper balance setup for optimum weighing results - Security slot for optional Kensington-type lock and cable to help prevent theft - Large, grade 304 stainless steel pan allows easy cleaning - RS-232 interface provides speedy connection to computers and printers - USB host for memory card - Built-in memory for storing products and settings - External calibration allows for verification and adjustment with weights ("I" models feature internal automatic calibration) - Selectable digital filtering helps minimize effects of vibration and disturbances - Security password control prevents unauthorized access - Printouts include date and time for data tracking within Good Laboratory Practices (GLP) guidelines - Preset tare function speeds the process of repetitive weighing - Parts counting with freely selectable sample sizes - Multilingual display allows use in many different countries - Memory accumulation totals results - Check weighing with audible alarm The Adam Equipment Equinox Analytical and Semi-Micro Balances deliver remarkable precision to labs that perform highly detailed testing. The Equinox is ideal for research and quality assurance facilities; science education; precision counting; and production and manufacturing applications needing exceptionally precise results. Eight analytical models offer capacities from 120g to 510g and 0.1mg readability. A color touch screen display provides intuitive operation, with icon-driven menus and readily accessible applications and functions. The five-inch screen is generously sized, offering 800 X 480-pixel resolution for excellent visibility. INCLUDED: The Adam Equipment EAB 514I Equinox Analytical Balance, 510g, 0.0001g includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty