Mettler Toledo 405-DPAS-SC-K8S pH Probe

Avidity Alto Water Purification System Lab This system was removed from a university lab, where it w (more)as surplus to requirements. Both devices power up and communicate, but we are unable to them further at our facility. This system is in good overall cosmetic condition. A password is required to operate the system, which is available on request.

This Soxtec Avanti 2050 Auto Fat Extraction System was removed from a university lab where it was su (more)rplus to requirements. Included are; 1 x Foss Tecator 2050 Soxtec Avanti Auto Extraction UnitPart no. 10007330 1 x Foss Tecator 2050 Drive UnitPart no. 10007338 The item powers on with the drive unit supplying power and controlling the extraction unit. It was not tested further. It seems to be missing a control unit. The item is in reasonably good cosmetic condition with some marks from use.

Eppendorf epMotion 5075 Liquid Handler Laboratory Automation Robot & Software This was removed f (more)rom a university lab where it was surplus to requirements. The unit powers up and the system and the PC communicate. We were able to get the tool holder to unlock and lock. It is showing a temperature unit module 1 issue. It is in good cosmetic condition with marks from use. Model - epMotion 5075SN - 5075 01005 Siemens Simatic PCEppendorf 6BK1800-0EP00-0AA0 Monitor not included.

Dionex DX-500 Ion Chromatography System - AD20 GP50 AS40 ED40 LC20 Lab This was removed from a unive (more)rsity lab where it was surplus to requirements. The unit powers up and has been serviced by a qualified technician (report available on request). It is in good working order. It is in good cosmetic condition with minor marks. Included are; LC20 Chromatography EnclosueModel - LC20SN - 00030734 ED40 Electrochemical DetectorModel - ED40-1SN - 00030525 GP50 Gradient PumpModel - GP50SN - 00010476 AD20 Absorbance DetectorModel - AD20-1SN - 99010291 AS40 Automated SamplerModel - AS40-1SN - 08070894

Selecta Precisterm thermostatic water bath. Capacity 12 L. Temperature range: ambient +5 °C to 110 ° (more)C. Stability ± 1ºC. Inner and outer stainless steel case. Inside dimensions: 15*30*30 cm (height, length, depth). Weight 8 Kg. User manual. Selecta Precisterm Water and Oil Baths. Providing excellent temperature stability for water and oil bath needs.

The high resolution MPS module operates on the basis of electromagnetic force converter. The device  (more)may be easily integrated into existing system owned by the customer. Compact design and integrated electronics provide various possibilities of MAS module adaptation into technological lines and installation inside laboratory equipment or devices. Measurements can be carried out using either weighing pan or under-pan weighing system, i.e. solution enabling the load to be suspended beneath the module. By cause of high measurement accuracy, it is recommended to install the module inside customer's device (e.g. in a draft shield) in order to reduce the influence of ambient conditions on the measurement result. The MPS module comes standard with a dedicated power supply. Features: Brand new design of the electromagnetic mechanism housed in an aluminium enclosure, Readability of 0.01 g, Ease of adaptation to the required storage space, Internal adjustment, Various options of hardware configuration. The module has been equipped with RS232 and USB type B interfaces. Dedicated freeware, the R Panel, has been designed to enable control of the module via a computer. It provides access to all the keys and functions available directly from the operation panel, e.g. taring, zeroing, setup, etc. Innovative algorithm for automatic search of electromagnetic weighing modules facilitates connection to a computer. R Panel software makes complete functionality of the R series balances available via the PC. R Panel functionality has been implemented in RLab program as one of its numerous functions.

This Hamamatsu A4178 Specimen Chamber w/ C2400 Camera was removed from a university lab where it was (more) surplus to requirements. This item is in reasonably good cosmetic condition overall but due to the power supply not being included we are unable to test it. It is sold as untested.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Do you need a moisture analyzer that not only determines moisture or dry matter content with impress (more)ive accuracy, but also performs a digital audit, responds to your voice commands and sends you light messages? If so, learn about the functionality of the ELLIPSIS series of moisture analyzers: It Dries in 4 Ways The MA 5Y.IC Moisture Analyzer offers you four drying profiles: standard, mild, fast and step. The standard profile is the usually used drying profile. It allows the most accurate determination of moisture content. The mild profile is designed for drying substances that are sensitive to the rapid heat released by the filaments, which heat full power at the initial stage of the process. An example of such a substance is leather. You will use the fast profile for samples with significant moisture content – of the order of even several tens of percent. The step profile will be ideal for drying substances that contain more than 15 percent moisture. Within this profile you can define any three temperatures. You will choose the values of temperature and duration of heating experimentally. What Drying Temperature Should I Set? The drying temperature determines the duration of the process. Its value depends on the type of material. If the temperature is too low, it will under-dry the sample and, consequently, unnecessarily increase the measurement time, while if it is too high, it will cause a burning effect on the material. The drying temperature for the traditional (oven) method is determined by industry or factory standards. If there are no standards, you will select the temperature experimentally. The maximum drying temperature on the MA 5Y.IC Moisture Analyzer is 160°C. How Do I Finish the Drying? In 4 Ways The MA 5Y.IC Moisture Analyzer has four finish modes: automatic, manual, time-defined and user-defined. Automatic mode You define the moisture loss limit value in 60 seconds. When the moisture analyzer reaches the set criterion, the measurement will automatically end. Manual mode You terminate the measurement yourself by pressing the STOP button. Time-defined mode The measurement ends after the set time has elapsed regardless of the result. You have up to 99 hours 59 minutes to manage! User-defined mode When you remove all volatiles from a sample, by definition, its mass should be constant. During drying, the dry mass of the sample is defined by a condition: if the mass of the sample is stable within 1 mg during the observation time (Auto 1-5), we consider that all volatile components have been removed from its structure. Digital Weighing Auditor Ensures that your moisture analyzer is ready for use. What is more, it informs about the need for a moisture analyzer inspection or a periodic audit of the moisture analyzer’s accuracy and sensitivity. 10-Inch Display Bigger screen – 10’’ – means more information in one place. On the new ELLIPSIS terminal, you will see up to 3 screens, widgets, graphs, statuses, notes, handy measurement history. Uncompromising User Verification For the first time ever, the moisture analyzer will verify the user using a password, RFID card, fingerprint reader, facial recognition mechanism, or any combination of these. Ambient Light – an Innovative Way for the Moisture Analyzer to Communicate With the User The light colour will tell you about status, process results, procedures, or alerts. Hotspot Use the moisture analyzer on any device connected to it. This can be a smartphone, tablet, or computer. RFID ELLIPSIS works with RFID tags* that can be used to tag your products or formulation ingredients in the database. They can also be used to identify a user. Live Note – Note Down Your Conclusions It’s the first time you can add a voice memo to a measurement series or procedure report. If you prefer to write it down, ELLIPSIS allows you to add a text note. Handy Library This is where a series of recent measurements or a report ready for digital signature, according to 21 CFR Part 11, can be found. Widgets Prepared to display what you need most at any given moment. 21 CFR Part 11 Do you work in the pharmaceutical industry? Do you need a digital signature? We are offering the moisture analyzer which as a standalone fully meets the requirements of 21 CFR Part 11/ EU GMP Annex 11. Full data security Electronic signatures Validations Electronic records Audit trails Modbus TCP/IP is one of the most popular communication protocols in industrial automation. Implementing it in the 5Y balances and CY10 scales makes the devices of this series friendly to automation integrators. A balance or scale in a Modbus system is a slave device and performs tasks specified by the master device which is most often a PLC. Protocol Modbus TCP/IP in the 5Y balances and C10 scales enables, among other things, the realization of mass readout, zeroing and tare functions of the device, as well as tare settings and MIN and MAX thresholds. * RFID ISO/IEC 14443 Type A, 13.56 MHz

The HX7 H is a mechanical design combining into one a PUE HX7 terminal and a 4-load-cell platform, b (more)oth made of stainless steel. High protection class, IP66 / IP68, makes the HX7 H a scale that can be used in harsh industrial conditions. 4 load cells guarantee correct weighing regardless of load placing at the platform. Equipment The scale provides 7" colour graphic display and a bar graph consisting of 9 diodes emiting red and green light. The bar graph is a graphic visualisation of the current net weight referred either to the scale range or predetermined min and max thresholds. Housing back is equipped with hermetic communication interfaces such as RS232, RS485, USB, Ethernet, at your disposal there are also digital inputs/outputs and analogue output. This enables cooperation with external devices such as: barcode scanners, printers, external displays, control buttons, light signalling towers, controlling/signalling devices, systems for automatic process control, superior IT systems. With use of the bracket you can either place the terminal at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. Databases The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Terminal’s system of information is based on databases: users, products, weighings, packaging, formulations, customers, ALIBI memory which guarantees stored data safety.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW