Vacuum controller

Wheaton 6-Tier Roller Apparatus Cat No 348970CE This was removed from a university lab where it was  (more)surplus to requirements. The unit powers up and is in good working order. The speed control knob is missing but can be adjusted with a flathead screwdriver. It is in good cosmetic condition with minor marks

Leica Reichert Ultracut S Ultramicrotome and Controller This was removed from a university lab where (more) it was surplus to requirements. The units all power up and the microtome is mechanically sounds, but only the top light is working. It is in good cosmetic condition with minor marks. Leica Reichert Ultracut S UltramicrotomeModel: Ultracut S Ultramicrotome 702501Serial#: 420626 2x Eyepieces:Cambridge instrumentsPart#: 31-05-62 Leica Reichert AG Control PanelModel: 654901Serial#: 89378

This item has just arrived in our stock. Please enquire for further details.

This item has just arrived in our stock. Please enquire for further details.

pH controller for the Electrolab FerMac 200 fermentation system. The FerMac 260 features a high impe (more)dance integrated amplifier to ensure accurate pH measurement and to accommodate a wide variety of pH electrodes. The pH controller uses industry standard peristaltic pumps.

The roller scale is designed for weighing heavy, large-size packages such as pallets or crates. It a (more)llows for final product mass control before it enters the warehouse or is transported to the customer. Depending on the application, the scale can be made in a powder-coated version, dedicated for use in warehouses, or in a stainless-steel version, intended for use in wet environments. Operation Ergonomics The scale has a large 10-inch touch screen, which is comfortable and intuitive to use. Operation of the roller scales does not require additional training, as the software of all RADWAG checkweighers is unified. Select an Interface That Your Production Line Supports RADWAG roller scales offer the option of using one of four industrial interfaces, depending on your requirements. All our interfaces allow you to: start and stop the dynamic weighing procedure remotely (Start and Stop function), enter the batch number (Batch Number Readout function), select a product (Select Product During Standstill function). Do You Want Your Scale to Work With a Barcode Scanner? Our roller scales are compatible with barcode scanners: 1D and 2D, manual and automatic. Data contained in one-dimensional (bar) barcodes can be read using 1D scanners. 2D scanners, on the other hand, can read 2D codes, which are large amounts of data encoded in images composed of black and white squares. You can use our scales if you have a manual or automatic scanner mounted above your production line. Roller Scale and Printer – The Perfect Combination Do you use a RADWAG roller scale but not a printer? You have no idea what you are losing. You can easily print a ready report (e.g. statistical or PGC) at any time thanks to the direct connection between the scale and a printer. Do you require product parameters or information on a specific operator? Just select, press “print”, and you’re done. The automatic printout function allows you to receive an automatic frame, i.e. information sent to your computer or printer, immediately after weighing. What does this mean for you? Possibility of recording weighings in real time. You can customise the automatic frame based on your preferences. What do you need? Mass? Product code? Date? You got it. Weigh the Product and Print the Label Do you print labels to identify products in your company? If so, you understand how time-consuming and tedious your work would be without a label printer. We have some exciting news for you: RADWAG roller scales are compatible with label printers. Our product range includes a label printer that can print thermal and thermal-transfer (paper, foil) self-adhesive labels. The printer communicates with the roller scale via Ethernet or RS 232. Capability to Record Measurements The local SQL database system and integration with the multifunctional server software E2R Checkweigher allow measurements to be recorded and processed. Does Your Line Require Special Control Algorithms? The RADWAG roller scales software allows you to adjust the scale operation to the specific requirements of your line. Approval The scale is MID approved. Custom Designs The scale can also operate in feeder mode by controlling the feeding valves.

Heidolph Hei-VAP Ultimate Control ML/G3B Coated Motor Lift w/ G3 Vertical GlasswareThe Hei-VAP Serie (more)s of rotary evaporators was developed with an emphasis on the essentials: well thought-out details with a focus on features and functions to facilitate everyday laboratory work. Hei-VAP Expert Control and Ultimate Control allow to centrally control all process parameters: vacuum, cooling temperature, rotation and heating bath temperature. Promising intuitive operation as all settings are configured centrally on the operating panel. In combination with the Control-Box, the panel can even be used as the central control unit to regulate the vacuum and the Hei-CHILL recirculation chiller as well. All Hei-VAP rotary evaporators have a safety heating bath with overheating and dry running protection, ergonomic handles, double wall and an integrated spout. Separate knobs with intuitive LED ring light system not only allow visual process control, but also direct intervention in the evaporation process at any time. The residual heat indicator operates when the function is deactivated and in standby mode, flashing and the display of the residual heat warn of the risk of burns (50 °C). Features: - 7" touch display - Clear display of all values (Basic/Advanced modes) - Timer - Max. temperature limitation - Multilingual menu with text alerts - Optional display of vapor temperature - USB and Micro SD plus LAN/RS 232 interfaces (Lab 4.0ready) - Control of any vacuum sources and Heidolph recirculation chillers - Solvent library - Favorites memory - Dynamic AUTOaccurate (DAA) - Ramp programming Click Here to View Product Video INCLUDED: The Heidolph Hei-VAP Ultimate Control ML/G3B Coated Motor Lift w/ G3 Vertical Glassware includes: - Heating Bath - Control Panel - G3B Coated Vertical Glassware - 1 Liter Receiving Flask - 1 Liter Evaporating Flask - Vapor Tube - Vacuum Seal - Vacuum Valve - Power Cord - Operator's Guide - Full 3 Year Manufacturer's Warranty

New Brunswick Innova 4400 Floor Standing Shaking Incubator Double Stack These were removed from a u (more)niversity lab where they were surplus to requirements. They have been fully tested to incubate and shake by a service engineer. They are in full working order. Inside dimensions - D57 W93 H44cmPlatform - 46 x 77cm They come with brackets for stacking, but there are only 3 feet and one of them is broken.

Oxford Instruments INCAx-Act Energy Dispersive Spectrometer System This system was removed from a un (more)iversity where it was surplus to requirement. It powers on and is in good cosmetic condition, we are unable to test it further at our facility. It was removed from a Philips XL30 SEM TMP system. Includes: - INCAx-act - Model: 51-ADD0082 - Sensor: 51-1385-046 - INCA MICSF+ - ASSY: 51-G-1100-149 - INCA x-stream 2 - ASSY: 51-G-1100-131 - Unit has been powered up with the included PSU. - 4 x PCI Interface Cards - Presumed to have been removed from the controlling PC, includes various corresponding cables. - Manual & Software Materials - Oxford Instruments 'The Principles and Practice of X-ray Microanalysis' CD Rom Discs. - INCA Binder with INCA Install Media Issue 5, The Microanalysis Suite Discs 1 & 2, Keys & Drivers, and 2 x USB System Recovery Pen Drives.

The HX7.4P2 C is a powder coated beam scale equipped with the PUE HX7 indicator. This 4-load-cell me (more)chanical design can be used in a wider range of applications when compared to the standard pallet solutions. Beam spacing allows to place any loads onto the scale using either a forklift or a transporter crane. Transport-supporting handles facilitate transfer of the device to the place of use. The indicator has been outfitted with a colour 7" graphic display and a diode bar graph which via red and green lights presents the current load mass referred to the scale range or preset minimum and maximum thresholds. At the back of the housing there are hermetic connectors of RS232, RS485, USB and Ethernet communication interfaces, plus digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Indicator’s system of information is based on databases (users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety.

Precision of WLC balances Fast, accurate and repeatable weight determination. Energy-efficient elect (more)ronics and display, combined with an internal rechargeable battery, are the perfect duo to allow you to work without access to mains power. Precision not just in the name When we designed this balance, we took care of the smallest details – both those you can’t see, hidden in the solid housing, and those you can touch. This balance is the result of a combination of our experience and true precision. The power of steel The use of stainless steel for the pan guarantees you a long life for the balance. It is not afraid of contact with moist objects or accidental splashes. It has been with us for years, and will stay for a long time to come The LCD display has accompanied us for long years. During this time it has proven its reliability. It guarantees the readability of the result from many angles and is energy efficient. Internal power The internal rechargeable battery combined with the energy-saving display and electronics allow many hours of operation without mains power. Time counts The balance is equipped with a real-time clock that provides accurate time measurement in a way that is independent of external power supply. There is potential Printer, computer, flash drive or additional display – you can easily connect them thanks to the fact that the balance is equipped with interfaces: 2 x RS232, USB type A and USB type B. Optionally, the balance can be equipped with 4 IN and 4 OUT. You can find all accessories in our regular offer. And if you have questions about compatibility, our experts will help you. Good ALIBI The ALIBI memory used in the terminal allows for safe storage of weighing records without the possibility of unauthorized interference. A single measurement remains in the ALIBI memory up to a preset limit number of days of storage, counting from the date it was taken. Under-pan weighing Weighing instruments purchased after 15th February 2023 will allow under-pan weighing at any time after the purchase. All you need to do is just to order a dedicated hook. THBR 2.0 System Cooperation with THBR 2.0 System for ambient conditions monitoring.

FURTHER DETAILS TO FOLLOW