Thermo Spectronic Genesys 10 UV Spectrometer Lab

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

HortiSpec+ equipped with a NR Lite2 Net Radiometer probe. The HortiSpec was developed to measure the (more) light intensity and spectral distribution in the visible and NIR range inside greenhouses. Plant growth and the photo synthesis depends very much on light intensisty and spectral distribution of the light intensity. The light intensity can be measured with the HortiSpec in Photons or other parameter, specific for the Horticulture. NR Lite2 is designed for routine measurement of net radiation which is the balance between incoming and outgoing radiation under outdoor conditions. The design of the NR Lite2 is unique. The double-sided detector has black conical absorbers with an anti-stick weather resistant protective coating. In contrast to other sensor designs, NR Lite2 requires no fragile plastic domes. This results in a virtually maintenance free design. The vertical stick prevents birds from affecting the output signal. Spectrometer: AvaSpec – 2048, CCD linear array 2048 pixels Grating VA, wavelength range (300 – 1100 nm) 200 µm slit, Detector collection lens, Order sorting coating Data communicaton: USB version 2.0, 480 mbps Aperture: Diffusor, diameter 3.9 mm Software: HortiSpec Irradiance software Measurement units: photon flux in µmol/s.m² Parameters: Lux, PAR, Blue, Yellow/Green, Red, Far red Specifications NR Lite2: Spectral range (overall): 0.2 to 100 µm Sensitivity: 10 µV/W/m² Response time: < 20 s Operational temperature range: -30 °C to +70 °C

This Thermo Spectronic Genesys 10 VIS UV/VIS Spectrometer was removed from a university lab where it (more) was surplus to requirements. This item powers on and is in good cosmetic condition, it has not been tested further. Lamp hours: 969.61

Agilent 7500c ICP-MS G3155A Inductively Coupled Plasma Mass Spectrometer Lab This item was removed f (more)rom a university where it was surplus to requirement. It is in very good cosmetic condition and powers on, we are unable to test it further at our facility.

This Millipore Direct Detect Spectrometer System was removed from a university lab where it was surp (more)lus to requirements. The unit has been fully tested and is in good working order. The system has been vacuum sealed and has had new desiccant added to keep the humidity low. It is in excellent cosmetic condition with minor marks from use. The unit is fully qualified.Laser.Source.Interferometer.Electronic.Automation..Detector.Have all passed the tests.The Performance Qualification is valid for 762 daysThe Operational Qualification is valid for 1120 days. 1 x Millipore Direct Detect main unit.1 x 24v PSU for the main unit.1 x Dell Optiplex 7010 PC with monitor, keyboard &amp; mouse.Running a fresh copy of Windows 7 and the Millipore Direct Detect software.Ethernet cable &amp; VGA cable.

Renishaw Structural &amp; Chemical Analyzer Model SCA SEM Raman Spectrometer This was removed from a (more) university lab where it was surplus to requirements. The unit powers up and is almost brand new. It has only run for 134 hours. It is in excellent cosmetic condition with minor marks.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Gynkotek &nbsp;P 580 A HPLC Pump &amp; Dionex UVD 170S UV Detector System This was removed from a un (more)iversity lab where it was surplus to requirements. The system powers up but has not been tested further. It is in reasonably good cosmetic condition with marks from use. It comprises of; 1 x Gynkotek HPLCType - P 580A 1 x Dionex UVD 170SPN - 6068.4000A 1 x Dell Optiplex G1 with Keyboard &amp; MouseModel no. MMPChromeleon Client Version 4.20 Build 350 1 x Box including:-Gynkotek HPLC Pump Series P580 Operating InstructionsGynkotek HPLC UV/VIS Detector UVD 170S/340S Operating InstructionsChromeleon Chromatography Data Systems Version 4.20 Software CD &amp; Tutorial

A&amp;D Weighing MX-50 Moisture Analyzer Capacity 51 g Weight Resolution 0.001g Moisture Content Ac (more)curacy 0.10 % (Over 1 g) 0.02% (Over 5 g) Features - 4 Selectable heating modes from standard, quick, step and ramp that help customize heating curves to your unique sample types for accuracy &amp; precision - 5 Selectable measurement programs to best fit sample and process with STANDARD, QUICK, AUTOMATIC, TIMER, MANUAL - Clear &amp; easy-to-view with the large VFD display means setting values, change in moisture content, action status indicators, and data number are clearly visible - Safe &amp; Reliable Design - Easy handles &amp; ergonomic design helps to prevent burn injuries while improving workflow movements of samples in and out efficiently - Self Check functions such as defect check function along with temperature control checks have you covered - Progress window allows easy visibility to see heating process through translucent window - Quick Reference Card for convenient operating guide is installed at the bottom of the analyzer - Data Interface is a breeze with RS-232C interface and our WinCT–Moisture software that helps determine measurement conditions as well as optimize time &amp; accuracy - Data memory function allows for test results to be stored and recalled or outputted for additional analysis - GLP, GMP, GCP and ISO compliant with date/time, ID, calibration data and check record outputs The A&amp;D Weighing MX-50 Moisture Analyzer is a powerful tool for precise moisture analysis, offering a blend of performance and user-friendly design for diverse laboratory needs. Equipped with four selectable heating modes—standard, quick, step, and ramp—the MX-50 allows users to tailor heating curves to their specific sample types, ensuring both accuracy and efficiency. With five measurement programs (Standard, Automatic, Quick, Timer, and Manual), this analyzer adapts to varying sample and process requirements, making it versatile for both routine and complex moisture analyses. The large VFD display provides clear visibility of all critical data, including settings, moisture changes, and process indicators, streamlining workflow and reducing user error. An ergonomically designed pan handle ensures safe handling of hot samples, and a convenient progress window lets users monitor the heating process with ease. Additionally, the unit is equipped with self-check functions to maintain reliability, including defect checks and temperature control. The MX-50 supports compliance with GLP, GMP, GCP, and ISO standards, making it ideal for regulated environments. Its RS-232C interface and WinCT-Moisture software allow for seamless data transfer, and the memory function stores up to 100 sets of measurement data, enhancing traceability and record-keeping. Supported by a robust 5-year warranty, the A&amp;D Weighing MX-50 ensures long-term reliability and precision, solidifying its place as a top choice for moisture analysis in the lab. INCLUDED: The A&amp;D Weighing MX-50 Moisture Analyzer includes: - 20 Sample Pans - Pan Support - Pan Handle - Tweezers - Spoon - Glass Fiber Sheet - RS-232C Cable - Display Cover - Dust Cover - Breeze Break Ring - Halogen Lamp - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Series PS.X2 The PS.X2 series represents a new advanced level for precision balances. The X2 series  (more)balances feature the latest generation capacitive display providing the maximum comfort of use, available right at your fingertips. Ease of operation, clear menu and practical arrangement of the display guarantee the best ergonomics for your everyday tasks. A wide array of available interfaces facilitate selection of the most optimal means for communication. Personalization taken to the next level The X2 is the only balance available on the market that provides a user with the option to design display using wide selection of widgets. Customised display of X2 series offers direct access to the results of your work and other important information directly from the home screen. The X2 series balances offer unlimited possibilities for cooperation with external devices, providing printing, copying, archiving and data transfer. Built-in IR sensors allow numerous operations (e.g. tarring, transmitting the result to a printer or selecting successive steps of a particular process, etc.) to be performed handsfree, by simply moving a hand across the sensor. The housing is made of plastic, and the pan is made of stainless steel. Databases in X2 series balances In new PS.X2 series balances the information system is based on 7 databases which allow several users to work with database storing several products. The registered weighing results can be subject to further analysis. The data is registered in 7 databases: Users (up to 10 users), Products (up to 5 000 products), Weighments (up to 50 000 weighments), Packaging (up to 100 packaging types), Formulas (up to 100 formulas), Clients (up to 1000 clients), ALIBI memory (up to 512 000 weighments). The X2 series features option of making reports on formulas (up to 500 reports). Weighing Data Management USB interface facilitates quick transfer and copying of any results of your work (measurements, reports, databases) to other balances. Network management of the weighing data increases effectivity, productivity and safety of the important data to the maximum. ALIBI Memory The X2 series balances feature ALIBI memory that is a warranty for safety and automatic recording of your measurements. Options such as data preview, copying and archiving are available to users as well. The ALIBI memory allows to record up to 500 000 weighment records. Under-pan weighing Weighing instruments purchased after 15th February 2023 will allow under-pan weighing at any time after the purchase. All you need to do is just to order a dedicated hook. THBR 2.0 System Cooperation with THBR 2.0 System for ambient conditions monitoring.

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.