Safas Monaco MC2 UV/Vis Reference Spectrometer Spektrophotometer 185..1100 nm

A stylish, desktop unit with an integrated touchscreen makes the Beacon perfect for those with limit (more)ed space or as a great point of sale companion inside dispensary environments. Lightweight, portable and user-friendly, the Beacon offers real-time, laboratory grade potency data to any sector within the cannabis ecosystem. Now you can get highly accurate, repeatable results in a flash, at a fraction of the cost. Cannabinoid Measurements: Total potential THC, THC-A, Delta 9 THC Total potential CBD and CBD-A Wavelength Ranges: 1550 – 1985 nm Lamp Type: Tungsten Halogen Dimensions (DxWxH): 220 x 160 x 210 mm Weight: 1.9 kg

The LC-NMR-MS Interface is designed to sit between an HPLC system, an NMR spectroscopy probehead and (more) an MS unit. It would normally be mounted on top of the MS table immediately in front of the MS input connector. The BNMI-HP consists of 3 medium pressure (> 60Bar) syringe pumps, a 1:20 splitter, an 8-Port valve, 3 mixing chambers (T-Pieces) and associated control and interface electronics. The flow of the HPLC separations to the MS unit can be modified by pumping additional solvent from the syringe pumps. This improves the MS peak detection and shortens the time needed for the split separation to reach the MS. Separations can also be stored as a result of an MS peak detection as well as through UV absorption peak detection. The splitter splits the fluid flow from the HPLC in a 1:20 ratio. i.e. ca. 5% of the fluid is directed to the MS and the remainder to either the NMR probehead for immediate analysis or to the BPSU36 storage cassette for storage and later analysis.  The fluid directed to the MS is mixed in the mixing chamber (T-Piece) with the solvent pumped from the syringe pumps. The two left hand syringe pumps pump alternatively to guarantee a constant ’makeup’ flow. The 3rd pump at the right hand side is used to pump a calibration fluid into the flow path to allow the MS to be calibrated (or simply synchronized) at the start and end of each measurement cycle. The 8-Port valve is used to direct the fluid flow. Control of the BNMI Unit is performed using the HyStar program via an ethernet interface. Commands received from HyStar are interpreted in the BNMI Control Board. The control board then sets up the BNMI unit accordingly e.g.: Starts the pumps, changes the flow rate, turns the 8-Port valve. The splitter has a fixed mechanical function and cannot be controlled or adjusted. It simply accepts a fluid flow and splits it into 2 paths in a 1:20 ratio. However, other split ratios are available (for example 1:100 may be preferred if you have very high sample concentrations).

This Thermo Spectronic Genesys 10 VIS Spectrometer was removed from a university lab where it was su (more)rplus to requirements. This item powers on and is in good cosmetic condition, it has not been tested further. Lamp hours: 921.51

Perkin Elmer LS 55 Luminescence Spectrometer This was removed from a university lab where it was sur (more)plus to requirements. The unit powers up and is in good cosmetic condition with marks from use. The lab reported that it was in good working order prior to removal, but we were unable to test it further at our facility.

HP 6890 5973 Series G1999A GC-MS Gas Chromatograph Mass Spectrometer System This was removed from a  (more)university lab where it was surplus to requirements. The lab confirmed that it is in good working order. At our facility we have connected the system together and powered it up, but not tested further. It is in good cosmetic condition with minor marks. Included are; HP ALS ready G1530ASerial No. US00028126 HP 5973 Mass Selective DetectorG1999ASerial No.US91430461 HP 59864B Ionisation Gauge ControllerSerial No. US60103518

Waters Xevo TQ-S Mass Spectrometer w/ PC & Mass Lynx Software Lab This system was removed f (more)rom a university where it was surplus to requirement. All units are in good cosmetic condition and power up. The Waters Xevo pairs successfully with the Mass Lynx software. The password required for the PC is available on request. This system comprises the following: 1 x Waters Xevo TQ-S Mass SpectrometerS/N: WAA280 1 x Edwards Pump XDS100B Dry Vacuum PumpS/N: 119487143 1 x Edwards Pump XDS46i Dry Vacuum PumpS/N: 139464035 1 x Lenovo Thinkcentre PCS/N: S4DVW20 1 x Lenovo L 2250pwD MonitorS/N: V6-0DED6 1 x Kensington keyboard 1 x Microsoft Mouse 4 x Various connection cables 1 x Stainless steel pipe 2 x Pump hose pipes with aluminium fittings and various clamps

Demo device. Unused & in original packaging. 2022 model. Great condition. 6 months warranty. Technic (more)al specifications: - External dimensions (WxDxH): 780 x 970 x 945 mm - Internal dimensions (WxDxH): 607 x 670 x 629 mm - Internal volume: 255 l (usable: 162 l) - Rack dimensions: 560 x 500 mm (capacity: 12 pcs., scope of delivery: 3 pcs.) - Max. weight load per rack: 10 kg - Max. weight load per device: 30 kg - Device weight: 97.5 kg - Adjustable temperature: +3 °C - 55 °C - Ambient temperature: +18 °C - +34 °C - Temperature deviation: +/- 0.1 °C

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Highest Precision The E1 class mass standard of 1 g is a cylindrical standard with the highest preci (more)sion, designed for applications requiring accurate measurements. Made of high-quality materials to ensure stability and measurement accuracy. Ideal for laboratories, research centers, and anywhere precision weighing is needed.

Do you need a balance that not only determines weight with impressive accuracy, but also performs a  (more)digital audit, responds to your voice commands and sends you light messages? If so, learn about the functionality of the ELLIPSIS series of balances: Digital Weighing Auditor Ensures that your balance is ready for use. It enables air buoyancy compensation in real-time. What is more, it informs about the need for a balance inspection or a periodic audit of the balance’s accuracy and sensitivity. 10-Inch Display Bigger screen – 10’’ – means more information in one place. On the new ELLIPSIS terminal, you will see up to 3 screens, widgets, graphs, statuses, notes, handy measurement history. Uncompromising User Verification For the first time ever, the balance will verify the user using a password, RFID card, fingerprint reader, facial recognition mechanism, or any combination of these. Ambient Light – An Innovative Way for the Balance to Communicate With the User The light colour will tell you about status, process results, procedures, or alerts. Hotspot Use the balance on any device connected to it. This can be a smartphone, tablet, or computer. RFID ELLIPSIS works with RFID tags* that can be used to tag your products or formulation ingredients in the database. They can also be used to identify a user. Live Note – Note Down Your Conclusions It’s the first time you can add a voice memo to a measurement series or procedure report. If you prefer to write it down, ELLIPSIS allows you to add a text note. Handy Library This is where a series of recent measurements or a report ready for digital signature, according to 21 CFR Part 11, can be found. Widgets Prepared to display what you need most at any given moment. 21 CFR Part 11 Do you work in the pharmaceutical industry? Do you need a digital signature? We are offering the laboratory balance which as a standalone fully meets the requirements of 21 CFR Part 11/ EU GMP Annex 11. - Full data security - Electronic signatures - Validations - Electronic records - Audit trails Smart Min Weight The balance displays whether the value of the weight you want to weigh is below or above the minimum weight threshold. Modbus TCP/IP is one of the most popular communication protocols in industrial automation. Implementing it in the 5Y balances and CY10 scales makes the devices of this series friendly to automation integrators. A balance or scale in a Modbus system is a slave device and performs tasks specified by the master device which is most often a PLC. Protocol Modbus TCP/IP in the 5Y balances and C10 scales enables, among other things, the realization of mass readout, zeroing and tare functions of the device, as well as tare settings and MIN and MAX thresholds. Two-point adjustment Adjacency, which takes place at two measurement points instead of one, improves measurement precision over the full weighing range. And what does this mean for you? More accurate measurement. * RFID ISO/IEC 14443 Type A, 13.56 MHz

The HX7.4 H/Z scale is a device constructed on the basis of a PUE HX7 terminal and a ground-embedded (more) 4-load-cell platform, both manufactured using the AISI 304 stainless steel. The device's high protection class, IP66 / IP68, makes it suitable for use in industry. HX7.4 H/Z Comfort of operation is guaranteed thanks to a clear-cut menu, and a colour display featuring a 9-diode bar graph blinking red and green when signalling current net mass of a load in reference to the scale range or declared min and max thresholds. Housing back is equipped with hermetic communication interfaces such as RS232, RS485, USB, Ethernet, at your disposal there are also digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. The terminal's system of information is based on databases: users, products, weighings, packaging, formulations, customers, ALIBI memory which guarantees stored data safety. The frame for recessing (foundation) is part of the set – you will receive it with the ordered scale.