Merck Millipore Direct Detect Spectrometer

This Agilent 11974U Preselected Millimeter Mixer was removed from a university lab where it was surp (more)lus to requirements. The unit is in good cosmetic condition but has not been tested. Accessories 1 x BNC cableThe unit is in good cosmetic condition. 1 x Adjustable StandThe unit is in good cosmetic condition, there are some light tape marks from general use.The stand can be moved 360º and adjusted up and down with a lock leaver. The lock lever is working.

Wab Agitator Bead Mill Dyno Mill System Lab This system was removed from a university lab where it w (more)as surplus to requirement. All units are in good cosmetic condition and powered up, this was tested with our testing cable, but we are unable to test it further at our facility. Power cable not included. This system comprises the following: (The Mill) Elektromotorenwerk Brienz AG CH-3855 Brienz Suisse AK71M-2WKFModel - AK71M-2WKFS/N - 1015500 STAHL-Fribos AG Cabinet No. - 6007-9610Drawing No. - 232885WAB B Nr - 609042Schaltag - Ref - 1137726

Wab Agitator Bead Mill Dyno Mill System Lab This system was removed from a university lab where it w (more)as surplus to requirement. All units are in good cosmetic condition and powered up, this was tested with our testing cable, but we are unable to test it further at our facility. Power cable not included. This system comprises the following: (The Mill) Elektromotorenwerk Brienz AG CH-3855 Brienz Suisse AK71M-2WKFModel - AK71M-2WKFS/N - 993060 STAHL-Fribos AG Cabinet No. - 07-1015Drawing No. - 232885WAB B Nr - 604618Fribos Ref - 1136629

1x Dyno Mill Grinder KDL A1x Tricool chiller MINAC 005LTS These items were removed from a university (more) lab where they were surplus to requirements. Both items are in good cosmetic condition and power on, we are unable to test them further at our facility. Information from the client states both units are in working order.

IKA Tube Mill control Disposable Chamber Grinding System Motor Rating Input 100 W Speed Range 5000  (more)- 25000 rpm Feed Hardness Max 5 Mohs Features - The IKA Tube Mill control features a patented disposable grinding chamber, eliminating cross-contamination and cleaning efforts. - Transparent chamber allows observation of grinding tests; suitable for hard, dry, and brittle materials like seeds. - Emphasis on security with error messages for improper chamber insertion and secure drive unit. - Features multilingual OLED display, adjustable timer, USB interface, interval operation, and variable speed from 5000 to 25000 rpm. - Various operating modes, adjustable safety settings, and programmable test conditions ensure reproducible results. - Includes two grinding chambers (MT 40.10 and MMT 40.1), touch keypad for easy operation, and dust-proof sealed housing for quiet operation. Tube Mill controlThe world’s first patented Tube Mill control is a batch mill with disposable grinding chamber. Eliminates possibility of cross-contamination and the effort of cleaning. The grinding chamber and cover are made of a transparent material so grinding tests can be observed at any time. The mill can be used for hard (Mohs hardness up to 5), dry and brittle materials. It is especially suitable for grinding seeds, such as corn and wheat. During development of the mill, particular emphasis was placed on security. The mill will only start when the hood is closed. When the grinding chamber is not inserted properly or not closed properly, the drive unit will display an error message and the drive will not start. During operation, the grinding chamber cannot be opened. The drive and the grinding chambers are secured with a labyrinth seal. No dust can escape from the chamber or penetrate the drive.Clearly arranged, multilingual OLED-displayTimer, adjustable from 5 s to 3 minUSB interface for control and documentation of all the parametersInterval operation availableInfinitely variable speed from 5000 to 25000 rpmVarious operating modesAdjustable safety speedAdjustable safety timeProgrammable and storable test conditionsError Code DisplayReproducible test resultsEasy operation with touch keypadDust proof sealed housingQuiet operationScope of delivery includes two grinding chambers: 1 x MT 40.10, 1 x MMT 40.1INCLUDED: The IKA Tube Mill control Disposable Chamber Grinding System includes: - Power Cord - One Year Manufacturer's Warranty

IKA M20 Universal Mill Useable Volume Max. 250 ml Speed Max. 20000 rpm Feed Grain Size Max. 7 mm  (more)Features - Double-walled grinding chamber with water cooling for precise temperature control. - Removable grinding chamber for easy cleaning. - Dual operation capability with two grinding chambers using one drive unit. - Includes M 21 blade for efficient grinding of hard and brittle substances. - Robust stainless steel construction for durability and reliability. The IKA M20 Universal Mill is a robust batch mill designed for dry grinding of hard and brittle substances up to 250 ml at a fixed speed of 20,000 rpm. Featuring a double-walled grinding chamber with water cooling capabilities through two hose adapters, it ensures precise temperature management during operations. The removable grinding chamber simplifies cleaning and maintenance, while its dual-chamber operation with a single drive unit enhances versatility. This mill includes the M 21 blade, crafted from stainless steel, to effectively handle challenging milling tasks in laboratory settings.INCLUDED: The IKA M20 Universal Mill includes: - M20 Mill - M 21 Blade - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty ( + Additional Free 1 Year Warranty Extension with IKA Registration) IKA M20 Universal Mill SpecificationsProcess typebatchOperating principlecutting/impactMotor rating input450 WMotor rating output225 WSpeed max.20000 rpmCircumferential speed max.72 m/sUseable volume max.250 mlFeed hardness max.5 MohsFeed grain size max.7 mmMaterial beater/cutterstainless steel 1.4034Material milling chamberstainless steel 1.4301Power-ON time7 min Power-OFF time10 min Milling chamber, can be cooled with wateryesMill feed can be cooled in milling chamber with dry iceyesDimensions (W x H x D)170 x 350 x 170 mmWeight6.6 kgPermissible ambient temperature5 - 40 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 21Voltage230 / 115 / 100 VFrequency50/60 HzPower input550 W Request a Formal Quote

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This New Brunswick Scientific Innova 2100 Laboratory Platform Shaker was removed from a university l (more)ab where it was surplus to requirements. The unit powers up and is in reasonable cosmetic condition. The sticky pads on top are worn and will likely need to be replaced. It runs up to 500rpm smoothly. Platform size 61 x 46cmBase 54 x 48cm

Waters Micromass EMD 1000 Lab This item was removed from a university where it was surplus to requir (more)ement. It is in good cosmetic condition but does not power on, therefore it is listed as Spares/Repair.

F1 Mass Standard - rectangular weights. Nominal value - 5 kg.

MA X2.A moisture analyzers are hi-tech measuring instruments intended for quick determination of rel (more)ative moisture content, dry mass content and other parameters in samples of different substances. MA.X2.A series is equipped with innovative system: the drying chamber can be opened and closed automatically using button or proximity sensors. Such solution allows: Maintaining moisture analyzer clean – operator does not touch moisture analyzer’s housing. Removing any shocks caused by manual closing of the chamber – the chamber closes automatically and always with the same intensity. Achieving high repeatability of opening and closing the drying chamber. Enhancing drying process automation. Enhancing safety of operation by eliminating contact with hot components of drying chamber. Improving operation ergonomics. MA.X2.A series features user-friendly colour touchscreen. Free configuration of the control panel can be done by means of hotkeys, customizable information fields and programmable labels. Drying process can be carried out for any temperature and – thanks to databases – particular drying process may be set for a specific product. Highlights of X2 Series moisture analyzers: Automatic opening and closing of the drying chamber 5” capacitive colour touchpad Modern interface Uncomplicated, intuitive operation Programmable display Drying profiles (standard, mild, step, fast) GLP/GMP printouts-reports Repeatable and customized applications Work optimization due to the use of halogen lamps Capacity and temperature MA.X2.A maximum capacity ranges from 50g/0.1mg to 210g/0.1mg. Moisture content is measured with the 0.01% accuracy (0.001 % for samples bigger than 1.5g). The maximum drying temperature is 160˚C (there is an optional moisture analyzer with 250˚C maximum temperature). An additional element for moisture analyzers that improves their functionality is a water vapour permeability determination set used in tanning industry for determining hygienic properties of leather. Databases: Information system of X2 series moisture analyzers is based on 8 databases, allowing many users to operate product database comprising many samples. Collected measurements may be subjected to subsequent analysis. Collected data is registered in 8 databases: Products (up to 5000 products) Users (up to 100 users) Packaging (up to 100 packagings) Customers (up to 1000 customers) Drying programs (up to 200 drying programs) Drying process reports (up to 5000 drying process reports) Ambient conditions (up to 10000 records) Weighings (up to 50000 records) The results The results obtained using the moisture analyzer (the final result of the drying process): % M – the mass loss in %; displays the mass change recorded during the drying process, expressed as a percentage, % D – the dry mass obtained during the drying process, expressed as a percentage; the result is the portion of the sample that remains on the weighing pan after the moisture has evaporated, % R – the ratio of moisture content to dry mass, obtained during the drying process, expressed as a percentage; the result is the portion of the sample that evaporated during the drying process, g – the sample mass after drying. Interfaces USB interface ensures quick transfer and copying of any results of your work (measurements, reports, databases) to a computer or other moisture analyzer. Remote access to the moisture analyzer allows for online data management. Cooperation with E2R allows for external data management which in turn increases the efficiency and results to the maximum.

Julabo CORIO C-BT27 Open Heating Bath, 115V/50-60Hz (NRTL Certified) Working Temperature Range 20°C (more) to 100°C Heating Capacity 1000W Volume 27L Features - Models for internal applications - Bright, white, easy to read display - Very quiet - Precise temperature control JULABO CORIO™ Immersion Heating Circulator combinations with transparent or stainless steel bath tanks for routine laboratory tasks. Units include bright LED display and easy operation. A quick connect bath clamp is included.The CORIO™ C immersion circulator provides temperatures to 100 °C for internal bath applications for use with water only.Products include a quick connect clamp for positioning the CORIO™ C on tank rim. Polycarbonate bath tanks have volume graduations in L and Qt. Stainless steel bath tanks include a drain port (except B5).INCLUDED: The Julabo CORIO C-BT27 Open Heating Bath, 115V/50-60Hz (NRTL Certified) includes: - Quick Connect Clamp - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty