Hitachi U-5100 UV/Visible Spectrometer 200..950 nm Six Cell Changer Spektrometer

This listing is for a Agilent Eclipse Fluorescence Spectrometer. The unit is in full working conditi (more)on and is ready for immediate release. Supplied with cables, software disk, License key,spare diffuser and Neutral density attenuator. The Agilent Cary Eclipse fluorescence spectrometer is sensitive, accurate, and flexible. Ideal for use as a routine fluorometer, the Cary Eclipse can easily be switched between fluorescence, phosphorescence, chemiluminescence, and bioluminescence measurements. Additional flexibility can be achieved through various accessories, including temperature control and solid sample handling, automatic polarizers, and a microplate reader for high sample throughput. Type:Benchtop fluorescence spectrometer Control Software :Cary WinFLR Light Source:Xenon flash lamp (80 Hz) with 10-year warranty on new instruments Maximum Scanning Speed :24,000 nm/min Modes of Operation:Fluorescence,Phosphorescence,Chemiluminescence,Bioluminescence,Time resolved phosphorescence. Power Requirements:100-240 VAC, 50/60 Hz Spectral Bandwidth Emission: 1.5 nm, 2.5 nm, 5 nm, 10 nm, 20 nm & 10 nm round nm Excitation: 1.5 nm, 2.5 nm, 5 nm, 10 nm, 20 nm & 10 nm round nm Wavelength Accuracy:± 1.5 nm Wavelength Range:Operational emission: 200 - 900 nm Operational excitation: 200 - 900 nm Depth:644 mm Height:271 mm Weight:30 kg Width:608 mm

The LC-NMR-MS Interface is designed to sit between an HPLC system, an NMR spectroscopy probehead and (more) an MS unit. It would normally be mounted on top of the MS table immediately in front of the MS input connector. The BNMI-HP consists of 3 medium pressure (> 60Bar) syringe pumps, a 1:20 splitter, an 8-Port valve, 3 mixing chambers (T-Pieces) and associated control and interface electronics. The flow of the HPLC separations to the MS unit can be modified by pumping additional solvent from the syringe pumps. This improves the MS peak detection and shortens the time needed for the split separation to reach the MS. Separations can also be stored as a result of an MS peak detection as well as through UV absorption peak detection. The splitter splits the fluid flow from the HPLC in a 1:20 ratio. i.e. ca. 5% of the fluid is directed to the MS and the remainder to either the NMR probehead for immediate analysis or to the BPSU36 storage cassette for storage and later analysis.  The fluid directed to the MS is mixed in the mixing chamber (T-Piece) with the solvent pumped from the syringe pumps. The two left hand syringe pumps pump alternatively to guarantee a constant ’makeup’ flow. The 3rd pump at the right hand side is used to pump a calibration fluid into the flow path to allow the MS to be calibrated (or simply synchronized) at the start and end of each measurement cycle. The 8-Port valve is used to direct the fluid flow. Control of the BNMI Unit is performed using the HyStar program via an ethernet interface. Commands received from HyStar are interpreted in the BNMI Control Board. The control board then sets up the BNMI unit accordingly e.g.: Starts the pumps, changes the flow rate, turns the 8-Port valve. The splitter has a fixed mechanical function and cannot be controlled or adjusted. It simply accepts a fluid flow and splits it into 2 paths in a 1:20 ratio. However, other split ratios are available (for example 1:100 may be preferred if you have very high sample concentrations).

This Thermo Spectronic Genesys 10 VIS  Spectrometer was removed from a university lab where it  (more)was surplus to requirements. This item powers on and is in good cosmetic condition, it has not been tested further. Lamp hours: 195.24

This Thermo Finnigan LCQ Deca XP Plus Mass Spectrometer was removed from a university lab where it w (more)as surplus to requirements. The unit is in good used cosmetic condition but it does have various marks and signs of general use. The main board and mains switch have now been removed and sold. Not all the cables/connectors etc were re-connected during re-assembly. The following other parts were also removed; - Power supply, Serial No: 9001305 008, Model No: SDS400-3628-1, SSI P/N: 20-0049-015N - Multifan 4394, GB-PAT: 2133082 2075288, ASSY by PAPST in Hungary   - Dynode FINNIGAN P/N: 97000-98042 REV-C  - Aux valve TYPE: DEMB3628028, S/N: 237085000104  - 5kV power supply 97000 10070C  - Ion Gauge   - LED front panel + 4 screws ASSY No: 97000-61400 REV-C  - Vent Delay PCB panel ASSY No: 97000-61370 REV-A It also comes with;1 x LCQ Hardware Manual.2 x Vacuum hoses with breeze hose clamps.Various other front assembly parts. This is sold for spares/repairs

This Micromass LCT TOF Mass Spectrometer was removed from a university lab where it was surplus to r (more)equirements. The unit powers up and is in good cosmetic condition with minor marks. The lab reported that it was for spares or repairs but the fault is unknown. When we collected it, all the panels were removed, but we have fixed them back on. Edwards parts fitted:-SP25K N 9 Bar (SN-0171836682)FL20K Foreline Trap (PN-A13305000/SN-165003057)EXDC80 (PN-D39640000) It is sold for spares/repairs.

This Gasmet FT-IR Gas Analyser Spectrometer Model - DX4030 was removed from a university lab wh (more)ere it was surplus to requirement. The unit powers up and we have run a hardware check. Acceptable values for hardware parameters: Cell temp: close to ambient tempCell pressure: close to ambient pressureSource intensity: >50% (original =100%) - Unit showed 89%Interf height: >3V when cell is filled with zero gas (original approx 5.5V - Unit showed 3.57VInterf center: 2000...3000 point - unit showed 2483 pointsElectronic temp: 0...50ºC - unit showed 21.43Detector temp: -37ºC - Unit showed -37.08ºCExt detector temp: +25ºC - Unit showed 19.82ºC Nothing seems out on the acceptable values for the hardware parameters. We then ran the Zero Calibration check after flushing the air for 3 minutes.The unit showed - Min: 115.0000 Max: 58825.0000Acceptable values for Maximum background spectrum are >40 000 or >70% of original. The system is in good cosmetic condition but has some minor marks from use. It comes in Hardigg Storm Case with:-2 x Gasmet Battery UnitsGasmet Software CDQuantitech DongleGasmet DongleGasmet DX4030 Quick Reference Cards2 x Black carry cases

Temperature range: 2°C to 20°C Content: 104 L Dimensions (WxDxH): 595 x 640 x 1001 mm Weight: 43 kg  (more)Explosion proof

C32 series is an advanced but at the same time an easy-to-use weighing instrument that can be operat (more)ed in various industry areas. To ensure precision, speed and excellent measurement repeatability, high quality electronic components are used. Software Integrated battery and wireless data transmission enable portable operation. Complex software allows carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. C32 series devices feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution assure easy and clear transmission of data on current process. Colour bar graph signals whether the weighing result is within declared thresholds thus significantly influencing performance. C32 weighing instruments cooperate with RLAB software for collecting, presenting and carrying out statistical analysis of measurements sent by the weighing equipment. The software enables advanced functions for generating and customizing graphs and reports. Programmable keypad Complex 22-key keypad features programmable function keys which enable its customization. Integrated infrared sensors facilitate activation of basic functions without use of a keypad, this will be appreciated by the owners of high precision instruments. Cooperation C32 weighing instruments cooperate with barcode scanners and printers, this feature is especially important for those operators who use the instruments for parts counting or any tasks requiring clear-cut identification of measured products. Communication Wide range of communication interfaces ensures easy integration of C32 instruments with external master IT systems and trouble-free data exchange. Integrated inputs/outputs available in the basic version of the weighing instrument enable cooperation with external devices, i.e. control buttons, light signalling towers, buzzers and any other controlling/signalling devices. They also provide the ability to control uncomplicated dosing processes. Database Various permissions levels assure safety of stored data and prevent unauthorized operators from modifying the settings. Complex databases of products, packaging and customers are very important for operators working with wide range of products and having an extensive sales network. Broad range of maximum capacities and readabilities guarantees selecting the right model for a particular application.

If you buy a WPY Multifunctional Scale by July 31, 2024, you will receive each of these products alo (more)ng with a FREE lifetime license for the Workflow Module. Multifunctional scales WPY series is designed for fast and precise determining mass of weighed objects in industrial conditions and with application of a modern terminal PUE7 series. Application The device features simple structure and enables maximum automation of carried out weighing processes. Apart from standard weighing mode, the WPY series additionally allows for parts counting, labelling and formula making processes. The universal software implemented in the terminal enables scales cooperation with barcode scanners, receipt printers, label printers, RFID scanners and PC peripherals (including mouse, keyboard and external data storage devices) all connectable to built-in interfaces RS232, USB and Ethernet. The multifunctional WPY scales if connected to a label printer enables printing labels for matching goods weighed in industrial conditions. The labelling system based on the labelling scales WPY series is dedicated to printing labels for matching weighed products in a packaging process. The multifunctional WPY scales if connected to a label printer enables printing labels for matching goods weighed in industrial conditions. The labelling system based on the labelling scales WPY series is dedicated to printing labels for matching weighed products in a packaging process. Design and functionality The WPY series features a stainless steel weighing platform and a terminal comprising both, 5,7” TFT colourful touch screen display and a membrane keyboard. The system is ready to connect an additional weighing platform, and provides below functions: programming of display and functional keys, programming of infrared proximity sensors, designing printouts, designing text data that is displayed on terminal display. The Workflow Module will improve work in your company. It enables developing a path of customized weighing process adapted to individual requirements of a particular production system, and next sending it to all weighing instruments cooperating with the E2R. The given process is started on the weighing instrument upon operator logging or after selecting a product, a formulation or an ingredient to which it is assigned. Modifications are made with use of convenient and intuitive interface. Software functionality: available working modes: weighing, parts counting, percent setup, formulation, density determination, animal weighing; generating standard labels for matching single goods; generating C labels for matching cumulative containers; generating CC labels for matching containers with cumulative containers; three means of triggering a C and CC label printout: - manually, - by counter status, - by set mass value of a product; control scales mode (+/- control of measurement result); product identification using EAN-13 and EAN-128 codes; access to databases of operators, products, raw materials, clients, weighing records, universal variables and tares. The multifunctional WPY series enables quick searching of a product by means of a connected barcode scanner. This option considerably increases functionality of the system. The terminal enables cooperation with a computer software "LABEL EDITOR", and the software communicates with the scales either through RS 232 interface or through ETHERNET. Scale WPY series is available in dual range (non-verified) version on surchage. Dual and single range scales in non-verified version are named as: scale model/NL, e.g. WPY 150/C2/R/NL.

Motic 32 Student License w/ 2 Routers and Network Switch for MoticNet Software MoticNet offers the t (more)eacher a live overview for each student Digital Microscope Station. This overview can be extended to cover up to 32 individual microscopes with wifi cameras/tablets, so that even larger classes can be managed by a single teacher with ease. Knowing instantly what is going on at each station, the teacher can focus on presenting the actual teaching material. Additionally, the work at one student's station can also be shared with the entire classroom. This product provides licensing for 32 students, and includes two factory configured routers for use of MoticNet. INCLUDED: The Motic 32 Student License w/ 2 Routers and Network Switch for MoticNet Software includes: - 32 MoticNet Student Licenses - 2 Factory Configured Routers - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Benchmark Heat Block, 24 x 1.5ml Conical The Benchmark Block, 24 x1.5ml centrifuge tubes (conical) i (more)s for use with any Benchmark Dry Baths. INCLUDED: The Benchmark Heat Block, 24 x 1.5ml Conical includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty