Olympus IX50/Arcturus LCM2106 PixCell 2E Microdissection Microscope System

Nanometrics Nanospec/AFT Microarea Gauge 010-0180 Lab This system was removed from a university engi (more)neering department as surplus to requirements. This system powers on and is in a reasonably good cosmetic condition, unable to test it further at our facility. System includes: Nanometrics CTS-102 Film Thickness Computer/power supplyM/N: CTS 102-7200-0536-01S/N: 1282-2-00549 1x Nanometrics PrinterM/N: 6420-19107S/N: 53892536 1x Olympus BH Base 1x Olympus BHM Stage 2x American Optical 10xWF Eyepiece 1x Olympus 5 Piece Nose Piece with 3 Objective Lenses: - 1x Olympus M10 0.25P/N: 412650 1x Olympus MPlan 100 0.90P/N: 402546 1x Olympus MPlan 40 0.63P/N: 405434

Stereomicroscope trinocular Nexius Zoom NZ.1903-P. Objective-zoom 0.67 to 4.5 x, magnification of 6. (more)7 x to 45x, light incidente and transmitted 3-W LED. SPECIFICATIONS EYE Pair of wide-field eyepieces HWF10x/22 mm With adjustment of ± 5 diopters built-in. HEAD Trinocular head with tube holder eyepieces inclined 45°. Distance inter-pupillary adjustable between 54 and 75 mm It has a port trinocular splitter with a beam of light (50:50) OBJECTIVES Objective Zoom 1:6.7, with increases of 0.67 x to 4.5 x. Field of view from 33 mm to 4.9 mm working Distance 110 mm Lens lens optional 0.5 x, 0.75 x, 1.5 x and 2.0 x. All optical components are anti-rust and treatment of layers of anti-reflection for maximum light transmission. INCREASES Working distance and field of view with eyepieces supplied in the standard equipment HWF10x/22 mm D. T.* working Distance STAND Flatbed large format with column (model-P) bracket and movable in height with coarse by rack and pinion system mounted on the guides, ball bearings, high-precision, dual-LED lighting system 3W, base with 2 clamps-fastening of the sample, LIGHTING Incident and transmitted LED 3W power internal 100-240 Vac. Both illuminators can be used simultaneously, and enable the regulation of intensity independent. PACKAGING Supplied with power cable, protective cover, replacement fuse and user manual. Case of polystyrene.

Leica DM 2500 trinocular microscope. Nikon 10x/26.6 eyepieces. Six position nosepiece. Four Nikon pl (more)an phase objectives including a E10x/0.25; 20x/0.4; 40x/0.65 and oil 100x/1.25. Phase contrast condenser with iris diaphragm and filter holder. Right-handed mechanical stage. LED illumination. User manual. The Leica DM2500 optical microscope is particularly suitable for applications requiring special contrast techniques, such as fluorescence or phase contrast, in fields such as pathology or biomedical research.

Microscope trinocular Delphi-X Observer DX.1153-PLi eyepieces SWF 10x / 25 mm Ø 30 mm lenses with a  (more)correction to infinite (IOS) plane achromatic PLi 4/10/20 / S40 / S100x oil immersion, 60 mm parafocal, plate 190 x 152 mm with mechanical stage built-in x 78 x 32 mm and 3 W of lighting NeoLED ™ SPECIFICATIONS EYE • Super wide field SWF10x/25 mm for the porta-eye Ø 30 mm HEAD Trinocular design Siedentopf tube inclined at 30°. Distance inter-pupillary adjustable between 47 and 78 mm head trinocular standard has a selector of the optical path of three positions (100:0 / 80:20 / 0:100). Correction ± 5 diopters in both eyepieces. REVOLVER HOLDER OBJECTIVES Revolver holder objectives sextuple oriented towards the interior and are mounted on ball bearings of high precision. With screw thread for objectives of 25 mm diameter OBJECTIVES PLANE ACHROMATIC The Delphi-X Observer ™ comes standard with the objectives of the EIS corrected infinity Plane achromatic 4x / 0.10, 10x / 0.25, 20x / 0.40, S40x / 0.65 and S100x / 1.25 oil-immersion APPROACH Approach macro and micrometric coaxial, 100 graduations, accuracy of 1 μm, 100 μm by the rotation, the range of total displacement of about 35 mm Is supplied with a top elevation of the plate adjustable to prevent damage to the sample and the objectives. The focus system coarse has tension adjustment. The focus knobs micrométricos can be changed from left to right (for a magnetic system) in accordance with the preferences of the user STAGE Plate 190 x 152 mm with mechanical stage mechanical integrated right 78 x 32 mm With coating glass-Gorilla resistant to scratches. Stage mechanical for left-handed available upon request (Reference request: Add -L to the product number) CAPACITOR Abbe condenser with tiltable lens A. N. 0.90/1.25 with identification marks of the numerical aperture. Adjustable in height. Iris diaphragm HIGHLIGHTS DIASCÓPICAS • Type-Köhler-intensity adjustable by NeoLED™ 3W with internal power supply 100-240 V NeoLED™ The innovative design NeoLED™ is a combination of LED and custom lens thin specially designed with a short focal length to obtain three main benefits: • You can capture more oblique light from the LED light source, which significantly increases the light output • It requires less energy to reach this level of intensity of light • The greater opening of NeoLED™ allows the optical systems of the microscope to produce images with higher resolutions, very close to the diffraction limit of theoretical optics SENSOR ICARE This sensor allows to avoid the loss of unnecessary energy. The illumination of the microscope automatically switches off shortly after the user stops in front of the microscope CARRY HANDLE The carry handle on the back of the microscope guarantees a safe transportation of the microscope and the tool and the porta-tools integrated to ensure that the right tool is always available PACKAGING Supplied with power cable, protective cover, replacement fuse, user manual and small bottle of immersion oil 5 ml. Case of polystyrene

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Dimensions (H x W x D): 390 x 340 x 600 mm

This PBF PRA100M3 Power Supply was removed from a university lab where it was surplus to requirement (more)s. The unit is in good cosmetic condition with minor marks from use but has not been tested.

B.O.B 610 RBG Stevenson Space Heater Lab This item was removed from a university where it was surplu (more)s to requirement. It is in reasonably good cosmetic condition and powers on, we are unable to test it further at our facility.

The HX7.4N H scale is a device controlled by means of the PUE HX7 indicator, and it has been equippe (more)d with a 4-load-cell ramp platform made of stainless steel, AISI 304. This robust design facilitates weighing of heavy loads in humid environment. The ramps enable easy loading and unloading. Indicator with a colour 7” graphic display and a diode bar graph allow to observe visualisation of a current load mass presented in relation to the scale range or declared minimum and maximum thresholds. This makes the operation significantly easier. At the back of the housing there are hermetic connectors of RS232, RS485, USB and Ethernet communication interfaces, plus digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Indicator’s system of information is based on databases (users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety. Since the scale is equipped with a platform lifting system, you are kindly requested to order a transport box (OSB box for the platform) for it. The transport box is necessary for the safe and efficient transport and storage of the ramp scale with the platform lifting system. Please take this item into consideration when planning and placing your order. If you have any questions, the Customer Service Department will be happy to assist you.

Labconco 7540400 150ml Complete Fast-Freeze FlaskThe Labconco 7540400 150ml Complete Fast-Freeze Fla (more)sk consists of 7542400 Flask Bottom, 7544200 Flask Top and a supply offilter paper. Fast-FreezeFlasks attach with adapters to valve ports on Labconco Drying Chambers andManifolds. They are available in clear or amber-colored glass. A completeFast-Freeze Flask consists of a rubber top, glass bottom and a supply of filterpaper. Tops, bottomsand filter paper are available separately as replacement components. Adaptersare available in borosilicate glass or stainless steel. Fast-Freeze Flasks andAdapters are compatible with any brand freeze dryer that has 1/2" or3/4" diameter valve ports. Glass flaskswithstand maximum temperature of 490º C. Flask toppers withstand a maximumtemperature of 450º C. INCLUDED: The Labconco 7540400 150ml Complete Fast-Freeze Flask includes: - Flask Bottom & Top - Supply of Filter Paper - Manufacturer's Documentation - 1 Year Manufacturer's Warranty