Motic SMZ-171-TLED Stereo Trinocular Microscope with LED Illumination

Nikon Eclipse TE300 Inverted Fluorescence Microscope This item was removed from a university laborat (more)ory where it was surplus to requirements. It powers on using a power supply from a different item, but no power supply is included. Bulbs are in full working order. The item is in good cosmetic condition.As it is not a complete microscope, it is listed as Spares/Repair. The systems was professionally serviced and the following was discovered. • No evidence of salt corrosion detected.• DIC nosepiece present but objectives missing.• External power supply working & remote cable present.• Some damage to condenser lens (LWD 0.52) detected – not detrimental to image quality.• No phase or DIC modules present within condenser & no blanking plates fitted.• No fluorescence attachment or filter slider.• Focus spindle gear is cracked.• Some external shutters and filter wheels but incomplete.• Has an Orbit Monochromator controller – incomplete.• Missing stage plates.• Front photo port bung missing. Includes:- Nikon Condenser Turret Model#: Nikon LWD 0.52 - Nikon Binocular Head Serial#: 063482 No eyepieces or objectives are included. No bulb/light source is included. Model: TE300 TE-DH100WSerial No.: 413419

Olympus U-RFL-T Microscope Power Supply + U-LH100HG Lamp These were removed from a university lab wh (more)ere they were surplus to requirements. The units are in good cosmetic condition, but they do have various marks and signs of use. The power supply and lamp both power up fine. Included are;1 x Olympus U-RFL-T.1 x Olympus L-LH100HG. We cannot confirm how long the lamp has been used, as the timer was reset before we received the item.

Leitz Laborlux S laboratory microscope 3 optics: NIKON E 4x /0.10 160/- NIKON E 10x /0.25 160/- NIKO (more)N E 40x /0.65 160/0.17 230-240V ~, 50/60Hz 6V / 20W lamp Adjustable light intensity

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Motic Moticam X5 Plus Microscope Camera Highest Live Display Mode 1920x1080 Pixels Capture Resolutio (more)n 4MP Maximum Frames per Second (FPS) 30 FPS Features - 4MP (2560x1440 pixels) capture resolution - 1280x720, 1920x1080 pixels (Full HD) live display - Data transfer: Wi-Fi (2.4 & 5 GHz), Ethernet (RJ-45) - 30 Frames per second (depending on Wi-Fi strength) - CMOS sensor type (1/3-inch); C-mount lens mount The Motic Moticam X5 Plus is a 4 MP digital microscope camera with Wi-Fi and ethernet data transfer. The Moticam X5 Plus turns your microscope into a Wi-Fi station, allowing you to share your images with up to six devices at the same time by logging into MotiConnect from your tablet or smartphone. The Moticam X5 Plus follows our All-In-One-Box methodology. This means that with the included focusable lenses, eyepiece adapters, and glass calibration slide, you can convert almost any conventional microscope into a digital microscope. View, edit, capture and store your images in the blink of an eye, view live images on multiple wireless devices, and share your work with anyone in just a few clicks. The MotiConnect App makes data sharing possible in a collaborative environment, encouraging teamwork and collective learning experiences. Connect your Moticam to your computer if you wish to work with our well-known software Motic Images Plus 3.1, which comes included in the package as a download Click Here to View Product Video INCLUDED: The Motic Moticam X5 Plus Microscope Camera includes: - CS ring adapter - 12mm Focusable lens - Eyepiece adapters - Motic 4-dot calibration slide - Motic Images Plus for Windows/OSX/Linux (download) - MotiConnect (free app download) - Power Cord - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Motic BA210 LED Digital Compound Microscope Magnification Range 4x to 100x Optical System Colour Cor (more)rected Infinity (CCIS) Illumination 3W LED Features - Binocular head Siedentopf type, 30º inclined with Built-in digital camera CMOS 1/2” chip - 3MP - 2048x1536 pixels with USB 2.0 output - Widefield high eyepoint eyepieces N-WF10X/20mm with diopter adjustment - Reversed quadruple revolving nosepiece - CCIS EF-N Plan Achromatic objectives EF-N PL 4X, 10X, 40X S, 100X S Oil - Built in low position coaxial mechanical stage (Right-hand control) - Focusable Abbe condenser N.A. 0.90/1.25 with iris diaphragm and slot - Coaxial coarse and fine focusing system with tension adjustment - Manufactured in accordance with European RoHS Standard to avoid contact with lead - Anti-fungus treatment applied to all parts of the microscope for humidity protection - Switching power supply for use worldwide (100-240V) The new Motic BA310 Digital Pro Upright Microscope is designed for the rigors of daily routine work specifically for diverse applications in Hematology and Cytology. The BA310 Digital is a version of the BA310 featuring a built-in 3.0MP sensor. The demands placed on any routine microscope for daily work needs careful focus on every microscope detail. The new BA310 series features a powerful adjustable light source to meet both delicate and detailed lighting requirements for all sample types while the fully featured Koehler illumination helps in highlighting even the weakest-stained specimens. New CCIS EF-N Plan Achromat objectives provide optimal image contrast through newly designed multi-layer lens coatings. INCLUDED: The Motic BA210 LED Digital Compound Microscope includes: - Widefield high eyepoint eyepiece N-WF10X / 20mm with diopter adjustment - Built-in Digital Live Hi-Res Imaging Chip, 2592 x 1944 Resolution USB 2.0 - Reversed quadruple revolving nosepiece - CCIS EC Plan Achromat objectives 4x, 10x, 40x S, 100x S-oil - Built in low position coaxial mechanical stage (Right-hand control) - Focusable Abbe condenser N.A. 1.25 with iris diaphragm and slot - 45mm blue filter, immersion oil (5mL), power cord, allen hexagonal key, vinyl dust cover - Built in illumination 3W LED with intensity control - Motic Images Plus 3.0 for PC and MAC - Calibration Slide - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

This listing is for a Qiagen Qiagility PCR Prep System.The unit is in full working condition and is  (more)ready for immidate realese.The Qiagen QIAgility Automated PCR Prep System provides users with a fully automated PCR setup, responsive software, and increased productivity. This compact, benchtop liquid handling robot eliminates the need for manual pipetting steps, with high precision and reproducibility. The Qiagen QIAgility uses Qiagen PCR kits and step-by-step guided software to automatically calculate all mixes and worktable set up so you won’t need to program pipetting steps. This PCR prep system uses a single-channel pipetting head with dynamic liquid level sensing and supports almost any kind of thermal cycler and labware.HEPA filter: Preinstalled dual-cartridge 3M Air-Mate HEPA (High-Efficiency Particulate Air) filter system provides positive pressure clean air within the closed hood.Liquid-level sensing: Minimum detection volume (10 µl in 200 µl PCR tubes). Only functional in combination with QIAGEN Conductive Filtered Tips.Pipetting head: Single-channelPrecision: CV <1%, 5–200 µl (dry-well transfer) CV <5%, 2–5 µl (wet-well transfer) CV <10%, 1 µlTable capacity:6 x SBS positions (127.76 x 85.48 mm) for adapters and Tip Rack Holders 1 x Master Mix Block 1 x Reagent BlockTip disposal:All used tips ejected externally — no waste accumulation on the worktableTip volume:1–200 µlUV lamp Preinstalled UV lamp for worktable decontaminationDeck Dimensions 19.5×14”Dimensions 21x25x18″Electrical 100–240 V AC, 250 VA, 50–60 HzWeight 90.2 lbEnvironmental Tolerances Operating temperature, 15–30 °C (59–86°F), Operating humidity: 40–70%

VACUUBRAND BVC Control Fluid Aspiration System Ultimate Vacuum 150 mbar / 112 torr Maximum Pumping  (more)Speed 0.5 CFM at 60Hz Control Range 150 - 850 mbar Features - powerful and long-lasting chemistry diaphragm pump for universal economical use. - Extremely compact, space saving and low noise and thus the ideal tool in the workplace. - Easy operation due to electronically adjustable suction power via touch panel, for strong or sensitive suction. - Autoclavable collection bottle designed to reduce aero­sol and foam formation; with hydrophobic protection filter 0.2 µm, autoclavable quick-couplings available as accessory. - Ready to accept a second aspiration hand controller (VHCpro) to support two users. The BioChem-VacuuCenter BVC control serves for efficient and convenient aspiration of supernatants. The vacuum level - and thus the suction force - is exactly adjustable by the electronic touch panel and allows a sensitive and reproducible operation. The chemically resistant diaphragm vacuum pump is automatically turned on and off as needed, which reduces the low noise level even further. The BVC control is available in two complete equipment options with different collection flasks. The 2l borosilicate glass bottle with a protective coating has a very high chemical resistance. For larger amounts of liquids the 4l bottle of unbreakable polypropylene (PP) is used. The smooth surfaces allow an easy cleaning of the systems. INCLUDED: The VACUUBRAND BVC Control Fluid Aspiration System includes: - Chemistry Diaphragm Pump - 4L Collection Bottle - Adjustable Suction Power Control Panel - Non Contact Liquid Level Sensor - Quick Couplings (4l pp version) - Aspiration Hand Set VHC with Protection Filter - Operators Manual - Power Cord - 1 Year Manufacturer's Warranty

F2 Mass Standard - carrier weights. Nominal value - 20 kg.

IKA Microstar 7.5 Control Overhead Stirrer Speed Range 0/30 to 2,000 RPM Viscosity Max. 4,000 mPas  (more)Stirring Quantity Max. 5 l Features - Hardened glass enclosed, fast response display for maximum visibility and chemical resistance - State-of-art vibration sensors detect deviations from permissible thresholds and automatically stop the process - Clear display for all essential information at a glance - Integrated timer / counter for the control of kinetic sensitive reactions and reminders - Viscosities up to 4,000 mPas and volume of up to 5 l - Continuously adjustable speed between 0/30 – 2,000 rpm - USB interface, e.g. for documenting parameters using labworldsoft® or installing firmware updates - Intuitive and simple handling; touch-sensitive surface for long service life - Temperature reading on display - Chemically resistant housing - Key lock function - Microprocessor-controlled speed governor for constant rotational speed, even with changes in viscosity The new MINISTAR series by IKA: Developed using the latest cutting-edge technology, these high-tech overhead stirrers with compact designs are ideal for special applications. Combining high performance with particular excellence, they require minimal space and come with a lifetime guarantee. These products offer incredible stirring capabilities and control, making them a great cost-effective option for laboratories. With features like hardened glass enclosed displays, state-of-the-art vibration sensors, and microprocessor-controlled speed governors, the MINISTAR series ensures precision and reliability.Capable of handling a wide range of viscosities and volumes, these stirrers provide continuously adjustable speeds, making them versatile and efficient for various applications. See for yourself:Click Here to View Product Video INCLUDED: The IKA Microstar 7.5 Control Overhead Stirrer includes: - MICROSTAR 7.5 control - R 300 shaft protector - Fasten screws for R 300 (2x) - H 67.60 Temperature sensor, stainless steel - Chuck Key - USB Cable - USB A to Micro-B, 2 m - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty (+ Additional Free 8 Year Warranty Extension with IKA Registration IKA Microstar 7.5 Control Overhead Stirrer Specifications Stirring quantity max. per stirring position (H2O)5 lMotor rating input32 WMotor rating output22 WMotor principleBrushless DCSpeed displayLCDSpeed range0/30 - 2000 rpmViscosity max.4000 mPasOutput max. at stirring shaft15.7 WPermissible ON time100 %Torque max. at stirring shaft7.5 NcmSpeed controlTurning knob Setting accuracy speed1 ±rpm Deviation of speed measurement n 300rpm1 ±% Deviation of speed measurement n &lt; 300rpm3 ±rpmStirring element fasteningchuckConnection for ext. temperature sensorPT1000Temperature displayyesChuck range diameter0.5 - 8.2 mmHollow shaft, inner diameter8.5 mmHollow shaft (push-through - when stopped)yesFastening on standextension armExtension arm diameter13 mmExtension arm length160 mmTorque displayyesSpeed controlelectronicNominal torque0.075 NmTorque measurementtrendDeviation of torque measurement I3 ±NcmTimeryesTimer displayLCDTime setting range0 - 6000 minTemperature measuring range-10 - 350 °CTemperature measurement resolution0.1 KAccuracy of temperature measurement±0.5 + tolerance PT1000 (DIN EN 60751 Class A) KLimit deviation temperature sensor≤ ± (0.15 + 0.002xITI) KHousing materialalu-cast coating / thermoplastic polymerCommunication distance (depend onbuilding) max.150 mDimensions (W x H x D)60 x 173 x 136 mmWeight1.18 kgPermissible ambient temperature5 - 40 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 54USB interfaceyesVoltage100 - 240 VFrequency50/60 HzPower input32 WDC Voltage24 VCurrent consumption1300 mAComparison of ModelsSpecificationsIKA Microstar 15 Control Overhead StirrerIKA Microstar 15 Digital Overhead StirrerIKA Microstar 30 Control Overhead StirrerIKA Microstar 30 Digital Overhead StirrerIKA Microstar 7.5 Control Overhead StirrerIKA Microstar 7.5 Digital Overhead StirrerStirring quantity max. (H2O)10 l10 l20 l20 l5 l5 lMotor rating input32 W32 W32 W32 W32 W32 WSpeed displayLCDLEDLCDLEDLCDLEDSpeed range0/30 - 1000 rpm0/50 - 1000 rpm0/30 - 500 rpm0/50 - 500 rpm0/30 - 2000 rpm0/50 - 2000 rpmViscosity max.8000 mPas8000 mPas20000 mPas20000 mPas4000 mPas4000 mPasTorque max. at stirring shaft15 Ncm15 Ncm30 Ncm30 Ncm7.5 Ncm7.5 NcmTime setting range0 - 6000 minN/A0 - 6000 minN/A0 - 6000 minN/ATemperature displayYesN/AYesN/AYesN/AUSB interfaceYesYesYesYesYesYesVoltage100 - 240 V100 - 240 V100 - 240 V100 - 240 V100 - 240 V100 - 240 V.comparison-table tr td:nth-child(6) { background-color: #fffacd; }DownloadsTechnical Specification Download Operator's Manual Download Request a Formal Quote

Corepoint Scientific NSRI231WSW-0 Single Solid Door Temperature Test Chamber Temperature Setpoint Ra (more)nge 4°C to 70°C Humidity Setpoint Range 15 to 95% RH Capacity 23 cu. ft. (651.3L) Features - Designed for rigorous scientific and laboratory research requirements - Self-closing, right-hinged solid door and three 304 stainless steel sliding tray shelves - PID controller with graphic display, programmable ramp and soak functions, and process phase graphic animations - USB data port, RS-485 communication (MODBUS-RTU), real-time clock, battery backup, and event logs - Foamed-in-place polyurethane foam insulation and white powder-coated steel exterior - Top-mounted variable speed compressor and hydrocarbon natural refrigerant - Multi-element proportional electric heating and shielded interior LED lighting - Heavy-duty door handle, magnetic door gasket, keyed door lock, and probe access port The Corepoint Scientific NSRI231WSW-0 Single Solid Door Temperature Test Chamber is designed to meet the rigorous demands of scientific and laboratory research. This 23 cu. ft. capacity chamber features advanced engineering in cabinet construction, refrigeration, temperature control, and monitoring to ensure energy-efficient, safe, and reliable performance. It includes a self-closing, right-hinged solid door and three 304 stainless steel sliding tray shelves. The PID controller with a graphic display offers programmable ramp and soak functions, process phase graphic animations, a USB data port, RS-485 communication (MODBUS-RTU), a real-time clock, battery backup, and event logs. The chamber provides precise temperature control from 4°C to 70°C with ± 0.1°C accuracy, ± 0.5°C stability, and ± 1°C uniformity. Additional features include foamed-in-place polyurethane foam insulation, a white powder-coated steel exterior, a 304 stainless steel interior, plenum air distribution, a top-mounted variable speed compressor, hydrocarbon natural refrigerant, multi-element proportional electric heating, shielded interior LED lighting, a heavy-duty door handle, magnetic door gasket, keyed door lock, and a probe access port. This chamber is ideal for a wide range of applications in life science, pharmacy, biological, medical, clinical, and industrial fields. INCLUDED: The Corepoint Scientific NSRI231WSW-0 Single Solid Door Temperature Test Chamber includes: - Key for Door Lock - 3 x Sliding Shelves - Power Cord - Operator's Manual - 18 Month Manufacturer's Warranty

Benchmark MiniMixer 3D Nutating Shaker The Benchmark MiniMixer 3D multi-functional shakers provides  (more)a 3-dimensional “nutating” motion for thorough, foam-free mixing in blood and centrifuge tubes, as well as in a variety of flat vessels. The MiniMixer comes standard with an autoclavable dimpled mat while optional flat mats are also available for mixing other vessel types. Stacking platforms can be purchased as accessories, effectively doubling the usable surface area of each model. Even the smallest single platform configuration has 24% more platform work surface than traditional nutating mixers. These mixers feature maintenance free, brushless motors capable of loads up to 2kg and are safe for use in cold rooms and incubators. INCLUDED: The Benchmark MiniMixer 3D Nutating Shaker includes: - 10 x 7.5 inch Dimpled Mat - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty