Motic SMZ-160-BLED Stereo Zoom Microscope with LED Illumination

This Nikon Optiphot-2 Microscope was removed from a university lab where it was surplus to requireme (more)nts. The unit powers up and all the objectives appear to focus well. It is in good cosmetic condition with only minor marks from use. There are 4 x Objectives included, and they are as follows; Objectives: Nikon 320081 Japan M Plan 100 1.25 oil 210/0Nikon 140131 Japan M Fluor 40/1.0 Oil 210/0Nikon 350730 Japan M Plan 10 0.25 210/0Nikon 120058 Japan M Fluor 20/0.6oil 210/0 Nikon PSM-2120

Zeiss Planapo 63x/1.4 Oel Microscope Objective 461841-9901 The unit is in good cosmetic condition bu (more)t has not been tested.

Leica Microsystems Type - TCS SP2 Confocal Microscope System Lab This system was removed from a univ (more)ersity where it was surplus to requirement. All units are in good cosmetic condition and powered up, we are unable to test them fully at our facility. There is a fault with the interlock microswitch in the microscope, thus preventing the unit from recognizing the laser being present.The previous client has stated that other than the fault stated, it is in full working order. Has Argon-ion laser, HeNe red, HeNe green and LED 405nm fitted. The system comprises the following items: Leica MicrosystemsType - TCS SP2SN - 198192Desk Dimensions - L131 W96 H83cm Anti-Vibration Table dimensions:-Frame - L66 W52 H70.5cmTable top - L72 W69 H3.5cmHas Laser fitted:-Coherent LaserPart no. 1040260/ACWavelength/Power - 408nm/25mWSN - AC-6 Leica DMIRE 2 MicroscopeType - 1109013407211888240 2620512 x Eyepieces HC PLAN S 10x/22 (507807)Leica Condenser 0.53 S 23 (521500)Leica C Mount Adaptor 0.5x : 1/2" = 16 (541511)4 x Objectives:-Leica ∞/0.17/D HCX PL APO 63x/1.32 OIL PH 3 CS (506182)Leica ∞/0.17/E HCX PL APO 63x/1.40-0.60 OIL (506192)Leica ∞/0.17/E HCX PL APO 40x/1.25-0.75 OIL CS (506179)Leica ∞/0/D HC PL FLUOTAR 10x/0.30 PH 1 (506507) Leica CTR MICStand - 11888240SN - 262051 Leica Power Supply for DiodeLaser COH 405nm, 25mWPN - 1530910001 03SN - 42127 Leica Light Source Power SupplyType - 301-185. 104-000SN - 252369 Leica ControlSN - 22894 Leica LampType - 11307072058 AOC Colour MonitorModel - 9GlrsSN - 9PPG0AD001924 Leica PCSamsung SyncMaster 192v 19" MonitorMicrosoft USB MouseCherry PS2 Keyboard Opto-Electric AA.MOD.nC Multi-channel PLL DriverSN - 24087

2 pair banana jack sockets Voltage: 0 – 8 V Amperage: 6.3 A

If you buy a High Resolution Scale HY10 by July 31, 2024, you will receive each of these products al (more)ong with a FREE lifetime license for the Workflow Module. Fast and Stable Measurement The scale displays the final result even in one second. High Maximum Capacity and Accuracy in a Single Device On the large weighing pan of an HRP scale, you can weigh a load of 150 kg with a readability of 1 g and impressive repeatability. Minimum Eccentricity Error Over the Entire Range On the HRP scales, you can also weigh irregularly shaped items with a centre of gravity significantly displaced from the weighing pan axis. Parameter Stability Over Time and After Transport Retain the correct metrological parameters even after prolonged, intensive use and transport of the scale due to its resistant and robust mechanical design. Weighing Pan Dimensions Adapted to the Accuracy of the Balance Weigh with the highest readability of 0.02 g on the 360 x 280 mm weighing pan and with a readability of 20 g on the 1,250 x 1,000 mm weighing pan. Maximum Robustness IP 67 platforms with additional sealing elements to protect against dust, dirt and moisture and can be cleaned with a pressure washer. New, lmproved MONOBLOCK® The new, taller and larger MONOBLOCK® enables the best repeatability and speed in its class of weighing platforms. New HRP Platform HY10 terminal is a constructional component of industrial multifunctional load cell scales, it connects with RADWAG high resolution platforms and weighing modules. Readability of 0.01 g at 10 kg maximum capacity and 0,2 g at 120 kg maximum capacity. Repeatability down to 0.01. Higher resistance to changes in ambient conditions. The platforms are so robust that they can be cleaned with a pressure washer. Transport protection that stiffens the structure during transport, eliminating any unwanted stresses. Platforms with a maximum capacity starting at 300 kg include transport handles, which makes them easy to move. Platforms of IP 67. PUE HY10 Terminal HY10 terminal is a constructional component of industrial multifunctional load cell scales, it connects with RADWAG high resolution platforms and weighing modules. High Level of Protection HRP scales have additional sealing elements to protect them from dust, dirt and moisture. This allows them to be cleaned with a pressure washer.

Prior PX042 Compound Microscope With 4 x Objectives Lab This item was removed from a university wher (more)e it was surplus to requirement. It is in good cosmetic condition and in full working order. This microscope features: Four-position turret with the following objectives: E Plan 4 x / 0.10 -0.17E Plan 10 x Ph / 0.25 -0.17E Plan 40 x Ph / 0.65 -0.17E Plan 100 x Ph / 1.25 oil -0.17 Eyepieces: 2 x WF 10x/22

Drefa Door cabinet RT Creme 600x490x600

E1-class mass standards are the elite in the world of metrology, because standards of this class rep (more)resent the highest level of precision and accuracy in mass measurement. The E1 classification is one of the most stringent standards that standards must meet in order to be considered the most advanced and trustworthy measurement tools. E1 - class standard: flat polygonal sheet Nominal value: 200 mg Material: Stainless steel What Are the Characteristics of the E1 Class? Highest Precision - The allowable deviation from the actual weight is minimal, making standards of this class ideal for applications where every gram matters. Stability and Repeatability - This guarantees a consistent level of accuracy over the long term. Accurate Calibration - Standards of this class must be regularly compared with other standards of known mass to confirm their measurement accuracy. Materials with Unique Properties - E1 class mass standards are often made of materials with exceptional physical properties, which makes them stable and resistant to changes in environmental conditions. Application 1. Analytical Laboratories In analytical laboratories where accurate measurements are crucial, E1 class mass standards are used to calibrate balances with the highest precision. 2. Pharmaceutical Industry In drug manufacturing, where even the slightest deviation from the standard affects quality, E1 class mass standards are irreplaceable. 3. Scientific Research In scientific research, especially in areas requiring the highest precision, such as physics or chemistry, E1 class mass standards are used to ensure reliable results. 4. Metrology Industry In metrology laboratories where research on E1 class mass standards alone is carried out, E1 class standards are the standard of excellence. Class E1 mass standards are not only measuring tools, but also a symbol of metrological excellence. Their use affects the quality of measurements in various areas of life because they provide precision that can be relied upon. They are a key element in the world of mass measurement, shaping standards and raising the bar for all measurement tools.

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

The covers for weighing platforms with roller conveyors. The rollers are made of stainless steel, an (more)d they are available in two options: with or without side limiters. Intended for scales with weighing pan 600x400 mm (A x B).

A rack for under-pan weighing intended for XA balances. The rack is designed for weighing loads requ (more)iring carrying out the measuring process outside the main weighing platform, e.g. loads with non-standard dimensions and sizes and those generating a magnetic field. The rack also facilitates determining density of loads. The rack is available in powder coated mild steel finishing.

Volume air recirculation: 1205 m³/h Volume air exhaust: 494 m³/h Volume air total: 1699 m³/h Air flo (more)w: 0.45 m/s Internal dimensions (WxDxH): 1535 x 600 x 655 mm Dimensions (WxDxH): 1625 x 790 x 1380 mm Height support frame: 800 mm Weight: 290 kg