Motic SM7-7TR-T Trinocular Stereo Microscope

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Carl Zeiss Stativfuss U Surgical Microscope w/ Control Panel This was removed from a university lab (more) where it was surplus to requirements. It powers up and is in good cosmetic condition, the control panel successfully communicates and functions with the microscope. Included are; Carl Zeiss Stativfuss U Surgical Microscope w/ Control PanelModel: Stativfuss USerial#: 30 53 60 Carl Zeiss Lamp Power SupplySerial#: 30 34 79 Zeiss 12.5x Eyepiece x 4

ADE Phase Shift MicroXAM-100 Surface Profile Mapping Microscope This system was removed from a unive (more)rsity lab where it was surplus to requirements. The stage is inoperable as the controller does not work. The stage does not move manually. For this reason it is sold for spares/repairs. Cosmetic and working conditions vary as stated below each item. ADE Phase Shift MicroXAM-100Model: MicroXAM-100 The item is in excellent cosmetic condition and shows no signs of damage.However, when switched on, the item does not power on. The item includes the following components: - Nikon CFWN 10x/20 Eyepiece x 2: Both eyepieces are in good condition with clear clarity.- 50AT NA 0.55 885 Objective: This objective is untested. - Phase Shift Technology Rotary Stage 4360: Model: Rotary Stage 4360Serial#: L56332-3021The rotary stage is in good cosmetic condition and shows no signs of damage.However, when switched on, it does not power on. - Javelin Video Monitor: Model: BWM9BXSerial#: 7070083The video monitor is in good cosmetic condition.It powers on with the power light illuminated. - Nikon Transformer and Nikon 50W AD Lamp: Model: UNBoth the transformer and the Nikon lamp are in good condition and fully functional.The light output can be adjusted fully. - AD Phase Shift Controller: Serial#: E71000-500 The phase shift controller is in good cosmetic condition.It powers on with the power light illuminated.Unfortunately, further testing could not be conducted.

Zeiss Axioplan 2 Fluorescence Microscope w/ 4 Objectives Lab This item was removed from a university (more) where it was surplus to requirement. The unit appears to be functioning well and can also be controlled via the free MicroManager software. It is in good cosmetic condition. It does feature the following: 2x Eyepieces PL 10 x 25P/N: 44 40 34 2x Zeiss Plan-NEOFLUAR 40x/0.75 ∞/0.17P/N: 44 03 51P/N 44 03 50 1x Zeiss FLUAR 100x/1.30 oil ∞/0.17P/N: 44 02 85 1x Zeiss Plan-NEOFLUAR 63x/1.25 oil ∞/0.17P/N: 44 04 60 1x Carl Zeiss HAL 100 12v 100w lamp houseP/N: 1039-685 1x Zeiss Reflector Turret with 6 filters1x FITC 1x TRITC1x YFP1x CFP1x Cy51x DAPI

Motic SM7-7TR-PACH Trinocular Stereo Microscope Objectives 0.8X~5.6X (10-step) Optical System Galil (more)ean infinity optical design. Common Main Objective (CMO) Illumination LED Panel and Transmitted Light Module Features - The SM7 features an optical performance with true color reproduction, high resolution and low distortion. - Ultra-flat stand bases for a relaxed positioning of hands and forearms facilitate lengthy preparation work. - A variety of objectives and eyepieces allow tailoring a personal SM7. - The Galilean Optics of the SM7 show a 7:1 Zoom system, resulting in a standard magnification range of 8X-56X. - For the best possible image results, a 1X Plan-Apochromatic objective with a Working Distance of 81mm is available. - Besides minimized chromatic and spherical aberrations, it is the resolution of the 1X Apochromatic objective which makes the SM7 especially interesting for technical applications. Motic's SM7 Plan Apochromat is meant specifically for opaque samples, as it comes with a plain stand, although external light sources can be implemented. The SM7 Series features an optical performance with true color reproduction, high resolution and low distortion. Motic's new Galilean stereomicroscopes are our new highlight in terms of color reproduction, resolution and spatial information for users from biology, medicine and industrial QC. INCLUDED: The Motic SM7-7TR-PACH Trinocular Stereo Microscope includes: - 10X/22 eyepiece - Black/White Plate (Ø160mm) - PLAPO apochromat objective 1X, W.D.81mm - Trinocular tube - 7:1 zoom microscope body - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Motic PSM-1000E Trinocular Upright Industrial Microscope, Standard System Common Applicatoins Semic (more)onductor Analysis, and Laser Based Research Methods Optical System Specialized Lenses Design For NUV to Visible NIR Illumination Port for Fiber-Optic Coaxial Illumination Features - Ergonomic Design: The design of the PSM-1000 encourages the optimal amount of usability without sacrificing comfort. - Laser Work: The PSM-1000 is standard equipped for laser work covering the spectrums ranging from 355nm [UV] to 532nm [Green] to 1064nm [IR]. - Focusing Block: Rated for load weights up to 45lbs., image focal planes can be adjusted at 1μm resolutions within the total 50mm stroke. - Adjustable Nosepiece: Forward facing and equipped for four M26 x 1/36" (0.706) type objectives, the PSM-1000's nosepiece is dovetail mounted for molding to different types of research and usage. - Trinocular tilting head 3°-30° provides ease of use across a variety of applications. The PSM1000E is an OEM-ready instrument for the best images of flat, reflective specimens. Samples from metallurgy and the semiconductor field are treated by ELWD Plan Apochromatic objectives with a stupendous resolution power. The large FOV24 with an erect, true sided image allows fast orientation and manipulation work. INCLUDED: The Motic PSM-1000E Trinocular Upright Industrial Microscope, Standard System includes: - Adjustable Nosepiece - Widefield WF10X/24mm Eyepiece - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

This job lot of items come from a variety of university laboratories. The items were no longer requi (more)red, collected from various store rooms and facilities. None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should operate well. None of these items have been PAT or electrical safety tested. For this reason, we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks. They are sold as a spares/repairs bundle and further investment in each individual product may be required. It is an excellent opportunity for anyone looking to benefit from individual equipment resale. The units have not been tested at all. Included are; ITEM-37784 Finnigan MAT GCQ Gas ChromatographITEM-37773 TC Electronic RS 410ITEM-17249 Perkin Elmer DNA Thermal Cycler LabITEM-23961 2 x Faulty De Soutter Medical Clean Cast Systems CCS5 X2 -ITEM-24233 Sutter Industries Lambda 10-B Smart Shutter Wheel Drive ControllerITEM-35358 CETI TOPIC-B Laboratory Compound Binocular Microscope w/ 3 ObjectivesITEM-37878 ATB MOTOR ABF 63/4A-7QR Vacuum PumpITEM-29867 Eurotherm 903P/IS/HLO//ARE/SRE/VH/XN///LE IT/HAP//AP/SP////0/1200/C/05ITEM-24225 MSE Micro Centaur CentrifugeITEM-38498 UNI-T UT804 True RMS MultimeterITEM-38762 A Pair of Bio-Rad 1000/500 Electrophoresis Power Supplies

4 x APC Smart-UPS Line Interactive 2200VA Tower 230V Lab These items were removed from a university  (more)lab, where they were surplus to requirement. All items are in very good cosmetic condition and powered up, all items display 0% Battery, therefore we are unable to test them further. Model: Smart UPS 2200

MSE Soniprep 150 Ultrasonic Disintegrator With Titanium Probes Lab This item was removed from a univ (more)ersity where it was surplus to requirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility. The lab confirmed it was in working order prior to removal. This item also includes the following: Four titanium ultrasonic probes.2 x 9.5mm tips1 x 19mm tip1 x exponential probe (approx 3mm tip) 2 x "C" spanners for changing probes 1.5" and 7/8"

Multifunctional scales TMX H is designed to fast and precise determination of mass in industrial con (more)ditions. TMX H Multifunctional scales TMX H comprises terminal PUE 5 and a weighing platform. Labelling system series TMX H is used to print labels for marking weighted goods e.g. in the process of packing. The program can generate standard labels for single goods. Functionality of the software: a function of weight control (weighing control + / -), previewing weighments carried out on weighing terminal as a table of weighments, simplified reporting module allowing the report to be generated, creation of label templates from labels in weighing terminal, identification of goods by using the code EAN-13 and EAN-128, quick search using the range of barcode scanner, the availability of databases: the operators, products, clients, warehouses, tares (packages), etc. The application enables measurements execution and their record into a local database or on the server. Networked terminals allow transmission of the measurements to the parent database installed on the server. The ability to work with a computer program E2R SYSTEM. Terminal types: PUE 5.15R, PUE 5.19R – resistive touch screen technology. Protection class IP68. High resistance to moisture and dust. In comparison to remaining models, limited brightness and lower resistance to shocks and scratches. Possibility of operation using gloves preventing scratches (latex, material). PUE 5.15IR, PUE 5.19IR – infrared touch screen technology. Protection class IP68. Very high brightness and readability level. High resistance to moisture and dust. High mechanical resistance, possibility of operation using gloves (made of latex, material or even steel chain). PUE 5.15C, PUE 5.19C – capacitive touch screen technology. Protection class IP68. High brightness and readability level. High resistance to moisture and dust, good mechanical resistance. Absolute precision of touch detection, sensing multiple points of touch (multi-touch).

PS X2.M is a series of advanced-class precision balances of high resolution based on RADWAG MonoBLOC (more)K technology. The innovative construction of PS X2.M balance features a new single-point weighing pan fastening, which ensures its excellent geometry and minimizes eccentricity error. The labyrinth-shape fastening guarantees excellent resistance to contamination. Weighing module RADWAG MonoBLOCK technology enables weighing loads with the readability of d=0.01 g at the maximum capacity of 10 kg. Rigid base ensures stability of the weighing system and great resistance to shocks. Internal adjustment system means precision and high measurement repeatability. Leverage of internal weight mass enables adjustment within the whole measuring range. Features: d=0.01 g readability at 10 kg max capacity great resistance to ambient conditions stability and repeatability over time RADWAG MonoBLOCK technology internal adjustment within the whole measuring range complex databases and ALIBI memory ergonomic 5” colour touchscreen touch-free operation Databases The instrument allows saving completed measurement data as complex reports and graphs. There are 7 databases: Operators (max 100 entries), Products (max 5 000 entries), Weighings (max 50 000 entries), Packaging (max 100 entries) Formulations (max 100 entries), Customers (max 1000 entries), The balance enables creating formulation reports (max 500 entries). ALIBI memory provides data protection and facilitates automatic measurement recording (max 500 000 weighing records). The memory facilitates data previewing, copying and archiving. Communication PS X2.M series is equipped with the following interfaces: 2 x RS 232, USB type A, USB type B, Ethernet and Wireless Connection. USB allows for fast transfer and copying of work results (measurements, reports, databases) to a computer or other weighing device. The balance provides possibility of remote data management.

Mild steel powder coated weighing platform We provide you with mild steel powder coated weighing pla (more)tforms with readability [d] from 1 g to 100 g and maximum capacity [Max] from 3 kg to 300 kg. The platforms have a square shape of 300 x 300 mm or a rectangular shape of 400 x 500 mm or 500 x 700 mm. Use the potential Our platforms can work with one of eight weighing terminals to choose from: PUE CY10, PUE H315, PUE C315, PUE C32, PUE 7.1, PUE HX7, PUE HY10 and PUE 5. Power of steel The use of stainless steel for the pan guarantees you a long life of the platform. Fearless of its contact with moist objects or accidental splashing. The frame is made of mild steel. Mild steel powder coated weighing platforms are marked by a high degree of protection IP 65.