Motic PA53 FS6 EDF Trinocular Upright Biomedical Microscope w/ LUMOS Fluorescence LED

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This Leitz Laborlux K Binocular Microscope was removed from a university lab where it was surplus to (more) requirements. The unit powers up and is in full working order. It is in reasonably good cosmetic condition but has some marks and scratches from where stickers had been removed. Head - 512 661 2 x Eye Pieces -Periplan 10 x / 18 (519 748) 4 x Objectives:-160/- EF 10/0.25 (519760)160/0.17 EF 40/0.65 (519762)160/0.17 EF 100/1.25 OEL (519804)160/- EF 4/0.12 (519759) Condenser Head - 0.90ASS1.1 (513548)Condenser Swing top (513547)

Leica Microscope Micromanipulator with Stand This was removed from a university lab where it was su (more)rplus to requirements. The unit is in good working order and good cosmetic condition with minor marks from use.

This JEOL JEM2011 is being sold on behalf of a university lab where it was surplus to requirements.  (more)The system is was decommissioned in August 2023. The scintillator in the Gatan Multiscan Camera is coming to the end of its life and the Oxford EDX system has not been used in a very long time as the lab was unable to source a PC with the right connectors to support it. The pole piece is URP22_11. The system has now been decommissioned by JEOL and is ready for collection in Fife, Scotland. - JEOL JEM2011 transmission electron microscope, 200 kV operation, LaB6 or W filament - Oxford INCAx-sight/Oxford Link ISIS EDX system - Gatan Multiscan 794 CCD camera, 1024 x 1024 pix The system is sold for spares. The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

Motic PSM-1000 Trinocular Upright Industrial Microscope w/ APO Objectives (5x, 10x, 20x) Objectives  (more) APO 5X, 10X, 20X Optical System Specialized Lenses Design For NUV to Visible NIR Illumination Port for Fiber-Optic Coaxial Illumination Features - Ergonomic Design: The design of the PSM-1000 encourages the optimal amount of usability without sacrificing comfort. - Laser Work: The PSM-1000 is standard equipped for laser work covering the spectrums ranging from 355nm [UV] to 532nm [Green] to 1064nm [IR]. - Focusing Block: Rated for load weights up to 45lbs., image focal planes can be adjusted at 1μm resolutions within the total 50mm stroke. - Adjustable Nosepiece: Forward facing and equipped for four M26 x 1/36" (0.706) type objectives, the PSM-1000's nosepiece is dovetail mounted for moulding to different types of research and usage. The PSM1000 is an OEM-ready instrument for the best images of flat, reflective specimens. Samples from metallurgy and the semiconductor field are treated by ELWD Plan Apochromatic objectives with a stupendous resolution power. The large FOV24 with an erect, true sided image allows fast orientation and manipulation work. INCLUDED: The Motic PSM-1000 Trinocular Upright Industrial Microscope w/ APO Objectives (5x, 10x, 20x) includes: - APO 5X, 10X, 20X Objectives - Adjustable Nosepiece - Widefield WF10X/24mm Eyepiece - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Motic BA310E LED Trinocular Compound Microscope w/ Moticam 4000X Microscope Camera Objectives EC Pla (more)n Achromatic 4X, 10X, 40X, 100X Optical System Colour Corrected Infinity Optical System (CCIS®) Transmitted Illumination Koehler Quartz Halogen Features - Superior optical and mechanical performance - New rackless stage concept for easier x/y movement - Interchangeable 6V/30W Halogen bulb with LED modules - Full freedom of illumination options - C-Mount multitasking microscopy camera - 1080p Full HD live image with maximum color fidelity - Integrated 11.6" Full HD LCD screen - On-board Motic Images Plus 3.1 software for standalone operation

Dimensions (WxDxH): 600 x 480 x 700 mm

3 x Kino Flo Diva Lite 201 Lighting Systems These Kino Flo Diva Lite 201 Lighting Systems were remov (more)ed from a university lab where they were surplus to requirements. All items are in good cosmetic condition and powered on, unable to test further.

This Sonimat Ultrasons GP20 with Monitor/Terminal was removed from a university lab where it was sur (more)plus to requirements. The units power up and the monitor/PC unit is working but an alarm sounds. There don't appear to be any programmes/apps loaded onto the system.

This Agilent Technologies 1200 Series HPLC G1312B Binary Pump was removed from a university lab wher (more)e it was surplus to requirements. The item is in good cosmetic condition and powered up, as seen the item is missing the front door panel. We are unable to test this item further at our facility. Power supply included.

MA X7.A moisture analyzers are hi-tech measuring instruments intended for quick determination of rel (more)ative moisture content, dry mass content and other parameters in samples of different substances. MA.X7.A series is equipped with innovative system: the drying chamber can be opened and closed automatically using button or proximity sensors. Such solution allows: Maintaining moisture analyzer clean – operator does not touch moisture analyzer’s housing. Removing any shocks caused by manual closing of the chamber – the chamber closes automatically and always with the same intensity. Achieving high repeatability of opening and closing the drying chamber. Enhancing drying process automation. Enhancing safety of operation by eliminating contact with hot components of drying chamber. Improving operation ergonomics. MA.X7.A series features user-friendly colour touchscreen. Free configuration of the control panel can be done by means of hotkeys, customizable information fields and programmable labels. Drying process can be carried out for any temperature and – thanks to databases – particular drying process may be set for a specific product. Highlights of X7 Series moisture analyzers: Automatic opening and closing of the drying chamber 7” capacitive colour touchpad Modern interface Uncomplicated, intuitive operation Programmable display Drying profiles (standard, mild, step, fast) GLP/GMP printouts-reports Repeatable and customized applications Work optimization due to the use of halogen lamps Capacity and temperature MA.X7.A maximum capacity ranges from 50g/0.1mg to 210g/0.1mg. Moisture content is measured with the 0.01% accuracy (0.001 % for samples bigger than 1.5g). The maximum drying temperature is 160˚C (there is an optional moisture analyzer with 250˚C maximum temperature). An additional element for moisture analyzers that improves their functionality is a water vapour permeability determination set used in tanning industry for determining hygienic properties of leather. Databases: Information system of X7 series moisture analyzers is based on 8 databases, allowing many users to operate product database comprising many samples. Collected measurements may be subjected to subsequent analysis. Collected data is registered in 8 databases: Products (up to 5000 products) Users (up to 100 users) Packaging (up to 100 packagings) Customers (up to 1000 customers) Drying programs (up to 200 drying programs) Drying process reports (up to 5000 drying process reports) Ambient conditions (up to 10000 records) Weighings (up to 50000 records) The results The results obtained using the moisture analyzer (the final result of the drying process): % M – the mass loss in %; displays the mass change recorded during the drying process, expressed as a percentage, % D – the dry mass obtained during the drying process, expressed as a percentage; the result is the portion of the sample that remains on the weighing pan after the moisture has evaporated, % R – the ratio of moisture content to dry mass, obtained during the drying process, expressed as a percentage; the result is the portion of the sample that evaporated during the drying process, g – the sample mass after drying. Interfaces USB interface ensures quick transfer and copying of any results of your work (measurements, reports, databases) to a computer or other moisture analyzer. Remote access to the moisture analyzer allows for online data management. Cooperation with E2R allows for external data management which in turn increases the efficiency and results to the maximum.