Motic BA410E 50W Halogen Trinocular Sextuple Compound Microscope (Light Split 80/20)

This VWR VisiScope BL224PL T1 Digital Microscope was removed from a university lab where it was (more) surplus to requirements. The unit powers on and is in good cosmetic condition. It is in full working order manually but is missing the display that should be mounted on it. 4x Objectives:1x 4/0.1 160/0.171x 40/0.65 160/ 0.171x 100/1.25 160/0.17 OIL1x 10/0.25 160/0.17 2x WildField Eyepieces:WF 10X/18

Life Technologies Evos FL Digital Inverted Microscope This item was removed from a university lab wh (more)ere it was surplus to requirements. The microscope powers up and is in good cosmetic condition. However, due to a faulty motherboard, the onboard camera and lamp are not recognized, rendering the device non-functional. One of our internal engineers has confirmed the following: - The unit displays error messages: "FW BL IF Error," "FW IF Error," and "Illumination Detection Error." - Attempts to update the software (REV:26059) were unsuccessful, as the error persists mid-update. - The hardware issue has been identified as a fault with the LED board

Motic Moticam A8 Microscope Camera Highest Live Display Mode 3840x2160 Pixels (4K) Capture Resolutio (more)n 8MP Maximum Frames per Second (FPS) 30 FPS (15FPS @ 3840x2160) Features - Perfect solution for tiny structures and insights on other stunning preparations - Ideal for documentation and flexible image capturing - Provides higher resolution demanded by advanced technical training areas or education fields - Features state-of-the-art sCMOS imaging unit packed in a high quality metal housing - Fits microscopes with available C-Mount for 1 / 3" sensor size - Still image and video capture - Still image measurement - Image adjustments - White balance - Automatic and manual exposure - Individual objective calibration system The Motic Moticam A Series of microscope cameras are digital cameras ultimately developed and designed for newcomers in digital imaging and young explorers with ambitious goals. For this reason, the newest technologies are hidden in a robust metal housing. It’s simple to use without time consuming training, thanks to the MotiConnect application software. This A8 model of the Moticam A Series is a microscope camera capable of delivering up to 15 frames per second at 3840x2160 pixels per frame, or up to 30 frames per second at 1920x1080 pixels per frame. With its higher resolution capability, the A8 is also ideal for documentation and flexible image capturing. Time is precious and limited. For this reason alone, the Moticam A Series is easy to install and ready for immediate use. When Motic promises all-in-one, they mean that all accessories are included. A calibration slide, eyepiece adapters for any eyepiece tube, a focusable lens and even a macro tube is part of the package. The all-in-one solution for a headstart is the Moticam A Series. The MotiConnect is a free multi-platform toolbox to make the most out of your new Moticam A Series product. Capture, annotate, measure and evaluate using simple to understand and easy to use tools. This free software can also be enhanced by purchasing the more advanced Motic Images Plus 3.1. Click Here to View Product Video INCLUDED: The Motic Moticam A8 Microscope Camera includes: - 30mm and 38mm Eyepiece Adapters - Calibration Slide and Card - C-Ring - Focusable Lens - Macro Viewing Tube - Dust Cap - Power Cord - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Head: Binocular Eyepiece: HC Plan 10x/20 mm Objectives: HI Plan 4x/0.10, 10x/0.22, 20x/0.30 Nosepiec (more)e: Quadruple Stage: 250 x 210 mm Focusing: Coaxial coarse and fine control knobs Illuminator: LED illuminator

THis was removed from a university lab where it was surplus to requirements. The unit powers up but  (more)none of the objectives are particularly clear, and two don't show an image at all (detailed below). The unit is quite stiff and awkward to use. For these reasons it is sold for spares/repairs. It is in reasonable good cosmetic condition with minor marks. 2x Carl Zeiss Kpl 8x Eyepieces 1x Leitz Wetzlar H 20x/0.40 ∞/1.80 Quarzgl. (no clear image) 1x Carl Zeiss 4494688 Ph2 40x/0.75 160/0.17 1x Carl Zeiss 4459404 Ph2 NEOFLAUR 25x/0.60 160/0.17 1x Carl Zeiss 4836489 Ph2 NEOFLAUR 16x/0.40 160/- 1x Carl Zeiss 4111437 Ph3 NEOFLAUR 100x/1.25 oil 160/- (no clear image). 1x Carl Zeiss Nose Piece III RS 46 62 49-9904 1x Carl Zeiss Stage 47 33 56-9901 1x Carl Zeiss Condenser 4680811 1x Carl Zeiss Microscope power supply 47 20 83 6 volt and 12 volt output. 1x Carl Zeiss Lamp power supply VHW 50f-2b 39 26 41 showing 365 hours and 55 minutes. 1x Carl Zeiss Lamp 12 volt 100 w 46 8019-9901 1x Carl Zeiss Lamp HBO 50 w 46 80 32-9902

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This Hema-Tek 2000 Slide Stainer Model - 4436 was removed from a university lab where it was surplus (more) to requirements. This item is in good cosmetic condition and powers up, but we are unable to test it further at our facility.

Wild Heerbrugg M40 - 81431 Inverted Microscope with Sixtuple Turret and PSU This was removed from a  (more)university lab where it was surplus to requirements. The unit powers up and is in good working order. It is in good cosmetic condition with marks from use. The microscope features: 1 x binocular head V=1.5 head with 2 x 15X K Wild oculars 1 x six-fold turret 4 x objectives all Wild Heerburgg: Fluotar 10/0.40 Ph, 10/0.40, 21194 20/0.60, 40/0.75 d=0.17 Power supply included.

This item has just arrived in our stock. Please enquire for further details.

Mechanical Design Compliant with HACCP DWM HPX checkweigher is designed in accordance with ‚hy (more)gienic design’ requirements. Adoped solutions minimize potential spots where contamination can accumulate, and facilitate maintenance. Among these solutions there are: round-profile construction, no places accumulating contamination, fast disassembly of conveyors and belts requiring no tools, less flat horizontal surfaces on which contamination may accumulate, stainless steel mechanical design (AISI 304 or 316). Specially-designed gaskets, seal wires and shields guarantee IP69K ingress protection. Intended Use This series of checkweighers is intended for food industry, it is especially useful on fish and meat processing production halls. The applied solutions and materials are compliant with strict hygiene standards required for food production. Reinforced, hermetic construction allows to clean the device with pressure washer. Measurement Speed and Precision Mass measurement using DWM HPX checkweigher is carried out with up to 0.5 g readability, on an electromagnetic weighing module housed in a hermetic housing of IP69K ingress protection. Clear Information Layout The 12” display with a touch panel enables easy access to the main functions and clear presentation of the most important information during operation, e.g. current mass value, current statistics, production line throughput and function buttons. Databases The DWM checkweigher features an SQL database. The database stores lists of products, operators and measurement reports. Connectivity with Central Database System E2R software enables synchronization of local databases of particular weighing instruments with a central database. With this, it is possible to preview and manage data from the weighing system administrator’s computer. Compliance with Global Standards DWM HPX checkweighers have type approval certification compliant with the MID directive, and have passed tests carried out in accordance with OIML R51. The checkweigher software enables creation of different permission levels for operators, and registers operations carried out on the scale along with possible operator errors. Compliance with 21 CFR Part 11. The following functions are available to ensure compliance with the regulation: 10 permission levels for operators to be defined by the administrator, requirements for each operator's passwords (determined by the administrator: minimum length, upper-case letters and digits quantity, special signs quantity), the requirement to enter new password at first logging (the first password is entered by the administrator creating the account), determination of password validity period in days automatic logout after a specified time of inactivity operator lockout after 3 incorrect login operations; lockout time specified, unlimited account lockout after 6 incorrect login operations; the account can be unlocked by the administrator saving changes to Audit Trail file; detailed reports on all modifications carried out on the checkweigher (information on parameters modifications including previous and new values), adding information about modification reason. This applies to all operational parameters of the checkweigher, e.g. conveyors speed, enabling/disabling ejector, ejector settings modification, checkweigher start/stop, logging and data contained in all products, operators, weighings and reports databases. All login, start, stop operations and report generating are recorded.