Motic BA410E 3WLED Binocular Sextuple Compound Microscope

This listing is for a 1 of 2 Vickers Instruments Vickers Instruments Binocular Microscope. The unit (more) is in full working condition and is ready for immediate release.

*No PAT record* Prior PL012 Binocular Microscope With 4 x Objectives This item was removed from a un (more)iversity lab where it was surplus to requirements. It powers on and is in reasonably good cosmetic condition. Includes 4 x objectives:- EA 100 Oil 1.25 160/0.17 - EA 4 0.10 160/- - EA 10 0.25 160/- - EA 40 0.65/0.17 Also includes 2 x WF 10X/20 Eyepiece. Model: PL012S/N: 57428

This Leica ATC 2000 Compound Microscope was removed from a university lab where it was surplus to re (more)quirements. The unit powers on and is in good cosmetic condition. The Lamp and stage are operational. We tested it with a slide and it is fully working. Included with it are 3 x Objectives; 1 x Red Leica 438 Achro 4/0.1 ∞ /0.17 1 x Yellow Leica 439 Achro 10/0.25 ∞/0.17 1 x Blue Leica 440 Achro 40/0.66 ∞/0.17 2x EyepiecesLeitz Wetzlar Germany Periplan GF 12.5x

Motic BA410E 3WLED Trinocular Sextuple Compound Microscope, Light Split 80/20 Magnification Range 4x (more) to 100x Optical System Colour Corrected Infinity (CCIS) Illumination 3W LED Features - Flagship model with highest level of optical performance - Maximum clarity in colour and resolution - Expanded resolution power for more detailed specimen evaluation - Light intensity adjustment with memory for each objective position - Rackless stage allows safe and fast throughput of slides - Coaxial coarse and fine focusing system with tension adjustment - Fine focus precision of 1 μm - Auto ON-OFF illumination function via built-in IR-sensor - Focusable and centerable swing-out Abbe condenser - Manufactured in accordance with European RoHS Standard to avoid contact with lead - Anti-fungus treatment applied to all parts of the microscope for humidity protection - Switching power supply for use worldwide (100-240V) The BA410 Elite is Motic’s brand new approach for a professional research microscope with best image quality options. This version of the Motic BA410E is a trinocular sextuple microscope with a trinocular head and EC-H PL4X, EC-H PL10X, EC-H PL40X S, EC-H PL100X S-oil objectives for professional research. Universities and laboratories with applications in hematology, cytology, and histology will benefit from this flexible microscope platform with a superb performance in optics and mechanics. Following Motic’s CCIS Infinity concept, the new Plan Apochromatic objectives may be chosen to get maximum image fidelity. Expanded resolution power in terms of numerical aperture and stunning color reproduction allows a reliable sample evaluation in all biomedical environments. The established EC-H Plan Achromatic bright field objectives are an integral part of the standard configurations, while Phase contrast is feasible with positive and negative Phase lenses.The BA410E stand carries an encoded 6-fold nosepiece that memorizes the light intensity setting for each objective position. This light memory function replicates the last setting once the respective objective position is swung in again. The rackless stage without a prominent gear rack allows a safe and fast throughput of slides. A ceramic stage insertion withstands abrasion for a long lifetime. INCLUDED: The Motic BA410E 3WLED Trinocular Sextuple Compound Microscope, Light Split 80/20 includes: - Widefield High Eyepoint Eyepiece WFPL 10X / 22mm - Rubber Eyecup (Paired) - Reversed Sextuple Nosepiece - CCIS Plan Achromat Objectives EC-H PL4X, EC-H PL10X, EC-H PL40X S, EC-H PL100X S-oil - Low Position Rackless Stage - Achromat Swing-Out Condenser N.A. 0.90 with Iris Diaphragm - Immersion Oil (5 ml), Allen Hexagonal Key, and Vinyl Dust Cover - Koehler Illumination 3W LED with External Lamp House and Intensity Control - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Motic BA410E 3WLED Binocular Sextuple Compound Microscope Magnification Range 4x to 100x Optical Sys (more)tem Colour Corrected Infinity (CCIS) Illumination 3W LED Features - Flagship model with highest level of optical performance - Maximum clarity in colour and resolution - Expanded resolution power for more detailed specimen evaluation - Light intensity adjustment with memory for each objective position - Rackless stage allows safe and fast throughput of slides - Coaxial coarse and fine focusing system with tension adjustment - Fine focus precision of 1 μm - Auto ON-OFF illumination function via built-in IR-sensor - Focusable and centerable swing-out Abbe condenser - Manufactured in accordance with European RoHS Standard to avoid contact with lead - Anti-fungus treatment applied to all parts of the microscope for humidity protection - Switching power supply for use worldwide (100-240V) The BA410 Elite is Motic’s brand new approach for a professional research microscope with best image quality options. This version of the Motic BA410E is a binocular sextuple microscope with LED illumination and EC-H PL4X, EC-H PL10X, EC-H PL40X S, EC-H PL100X S-oil objectives for professional research. Universities and laboratories with applications in hematology, cytology, and histology will benefit from this flexible microscope platform with a superb performance in optics and mechanics. Following Motic’s CCIS Infinity concept, the new Plan Apochromatic objectives may be chosen to get maximum image fidelity. Expanded resolution power in terms of numerical aperture and stunning color reproduction allows a reliable sample evaluation in all biomedical environments. The established EC-H Plan Achromatic bright field objectives are an integral part of the standard configurations, while Phase contrast is feasible with positive and negative Phase lenses.The BA410E stand carries an encoded 6-fold nosepiece that memorizes the light intensity setting for each objective position. This light memory function replicates the last setting once the respective objective position is swung in again. The rackless stage without a prominent gear rack allows a safe and fast throughput of slides. A ceramic stage insertion withstands abrasion for a long lifetime. INCLUDED: The Motic BA410E 3WLED Binocular Sextuple Compound Microscope includes: - Widefield High Eyepoint Eyepiece WFPL 10X / 22mm - Rubber Eyecup (Paired) - Reversed Sextuple Nosepiece - CCIS Plan Achromat Objectives EC-H PL4X, EC-H PL10X, EC-H PL40X S, EC-H PL100X S-oil - Low Position Rackless Stage - Achromat Swing-Out Condenser N.A. 0.90 with Iris Diaphragm - Immersion Oil (5 ml), Allen Hexagonal Key, and Vinyl Dust Cover - Koehler Illumination 3W LED with External Lamp House and Intensity Control - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Motic PA53MET-BD-T-3D Trinocular Upright Industrial Microscope w/ Analysis Professional Software Sui (more)te Stage Type Mechanical stage with low-position coaxial control and round/oval inserts Optical System Color Corrected Infinity Optical System (CCIS®) Illumination Koehler Quartz halogen 12V/100W with intensity control, External lamphouse Features - Robust manufacturing quality for a long lifetime - New BF/DF objectives for metallurgy - Sufficient power resources - A flexible upgrade for digital results Motic AE2000MET Trinocular Inverted Industrial Microscope, 100W Illumination Motic’s AE2000MET is an Inverted Metallurgical microscope designed to inspect polished cross-sections as well as larger, bulky samples within industries such as automotive, machinery, and metal fabrication. Large metal or die cast parts, too large to view under a conventional upright microscope, can easily be examined for failure analysis, material research or quality control.INCLUDED: The Motic AE2000MET Trinocular Inverted Industrial Microscope, 100W Illumination includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

LAUDA Proline immersion thermostat The LAUDA Proline bridge thermostats with vario flex pump are exc (more)ellent for thermostating in any tank. The PB models have a pressure / suction pump and are used in tanks of 200 mm. While the PBDs are equipped with pumps with more powerful pressure and used in tanks of 320 mm deep. Also available are a telescopic rod for tubs with a width of 310 to 550 mm, an ergonomic handle and attachments for side pumps. The LAUDA Proline bridge thermostats are available with two different control panels. The Master version (PB, PBD) is designed for all applications where the parameters are not changed very often. Models with the removable Command operating unit (PB C; PBD C) offer a graphic LCD screen for high ease of use and optimum functionality. The 'D' versions, 'PBD' and 'PBD C' models, are equipped with a max 1.1 bar pressure pump only, with a max. (pressure) of 32 L/min. The 'PB' and 'PB C' models are equipped with pressure and suction pumps, mac 0.7 bar and 0.4 bar respectively, with a max. (pressure) of 25 L/min. Notable features - PowerAdapt system for optimal adaptation of the max. Heat output. without interfering with the mains power supply - Low level protection and adjustable overtemperature protection with audible alarm. Levels measured with float Accessories included Fittings for pump connection, telescopic rod Specific characteristics of the Proline PB model - For tanks of 200 mm deep - Master control panel; calibration point, timer, under / over temperature alarms, digital indicators - Tank volume max. 80 L - Water-cooled temperature range from 20°C to 300°C - Operating temperature range from -30°C to 300°C - Pump connectors M16 x 1 - Fitting 13 Ø

Proline heating thermostat with tank Proline clear-view LAUDA thermostats have been designed for dir (more)ect observation of objects. They are ideal for use with LAUDA Scientific PVS or iVisc automatic viscometer, as the necessary temperature stability for precise viscosity determination is ensured over the entire temperature range. In addition, the two-chamber principle always guarantees a constant liquid level in the measuring chamber, regardless of the volume and temperature of the medium. PVL models with five layers of insulating glass are suitable for low temperature measurements down to -40° or -60°C when a low temperature chiller or thermostat is connected. These thermostats are available with two different control units. The Master version is designed for all applications where the parameters are not changed very often. The removable Command operating unit (PV C models) incorporates a graphic LCD screen for high operating convenience and a programmer. Notable features - LAUDA Vario Flex pump (pressure pump) with eight selectable power levels - Cooling coil fitted as standard with connection for additional cooler Accessories included Fittings for pump connection, cooling coil Specific features of the Proline PVL 15 model - Tank volume min. 11 L - Tank volume max. 15 L - Tank opening 230 x 135 mm - Bowl depth 320 mm - Usable depth 285 mm - Upper height of the tank 390 mm - Master control panel; calibration point, timer, under / over temperature alarms, digital indicators - Pump pressure mx. 1.1 bar - Water-cooled temperature range from 20°C to 100°C - Operating temperature range from -60°C to 100°C - Pump connectors M16 x 1 - Fitting 13 Ø

Refurbished Universal 32 R Refrigeration Centrifuge. 6 months warranty. Scope of delivery: - Hettich (more) 32 R refrigerated centrifuge - Swing-out rotor Hettich type 1624 - 4  round bucket - Various adapters on stock (additional costs apply)

Julabo FP50 Circulating Water Bath Lab This item was removed from a university where it was surplus  (more)to requirement. The unit powers up and is in good working order (thermometer not included). It is in excellent cosmetic condition and appears to have had little use.

Do you need a moisture analyzer that not only determines moisture or dry matter content with impress (more)ive accuracy, but also performs a digital audit, responds to your voice commands and sends you light messages? If so, learn about the functionality of the ELLIPSIS series of moisture analyzers: It Dries in 4 Ways The MA 5Y Moisture Analyzer offers you four drying profiles: standard, mild, fast and step. The standard profile is the usually used drying profile. It allows the most accurate determination of moisture content. The mild profile is designed for drying substances that are sensitive to the rapid heat released by the filaments, which heat full power at the initial stage of the process. An example of such a substance is leather. You will use the fast profile for samples with significant moisture content – of the order of even several tens of percent. The step profile will be ideal for drying substances that contain more than 15 percent moisture. Within this profile you can define any three temperatures. You will choose the values of temperature and duration of heating experimentally. What Drying Temperature Should I Set? The drying temperature determines the duration of the process. Its value depends on the type of material. If the temperature is too low, it will under-dry the sample and, consequently, unnecessarily increase the measurement time, while if it is too high, it will cause a burning effect on the material. The drying temperature for the traditional (oven) method is determined by industry or factory standards. If there are no standards, you will select the temperature experimentally. The maximum drying temperature on the MA 5Y Moisture Analyzer is 160°C. How Do I Finish the Drying? In 4 Ways The MA 5Y Moisture Analyzer has four finish modes: automatic, manual, time-defined and user-defined. Automatic mode You define the moisture loss limit value in 60 seconds. When the moisture analyzer reaches the set criterion, the measurement will automatically end. Manual mode You terminate the measurement yourself by pressing the STOP button. Time-defined mode The measurement ends after the set time has elapsed regardless of the result. You have up to 99 hours 59 minutes to manage! User-defined mode When you remove all volatiles from a sample, by definition, its mass should be constant. During drying, the dry mass of the sample is defined by a condition: if the mass of the sample is stable within 1 mg during the observation time (Auto 1-5), we consider that all volatile components have been removed from its structure. Digital Weighing Auditor Ensures that your moisture analyzer is ready for use. What is more, it informs about the need for a moisture analyzer inspection or a periodic audit of the moisture analyzer’s accuracy and sensitivity. 10-Inch Display Bigger screen – 10’’ – means more information in one place. On the new ELLIPSIS terminal, you will see up to 3 screens, widgets, graphs, statuses, notes, handy measurement history. Uncompromising User Verification For the first time ever, the moisture analyzer will verify the user using a password, RFID card, fingerprint reader, facial recognition mechanism, or any combination of these. Ambient Light – an Innovative Way for the Moisture Analyzer to Communicate With the User The light colour will tell you about status, process results, procedures, or alerts. Hotspot Use the moisture analyzer on any device connected to it. This can be a smartphone, tablet, or computer. RFID ELLIPSIS works with RFID tags* that can be used to tag your products or formulation ingredients in the database. They can also be used to identify a user. Live Note – Note Down Your Conclusions It’s the first time you can add a voice memo to a measurement series or procedure report. If you prefer to write it down, ELLIPSIS allows you to add a text note. Handy Library This is where a series of recent measurements or a report ready for digital signature, according to 21 CFR Part 11, can be found. Widgets Prepared to display what you need most at any given moment. 21 CFR Part 11 Do you work in the pharmaceutical industry? Do you need a digital signature? We are offering the moisture analyzer which as a standalone fully meets the requirements of 21 CFR Part 11/ EU GMP Annex 11. Full data security Electronic signatures Validations Electronic records Audit trails Modbus TCP/IP is one of the most popular communication protocols in industrial automation. Implementing it in the 5Y balances and CY10 scales makes the devices of this series friendly to automation integrators. A balance or scale in a Modbus system is a slave device and performs tasks specified by the master device which is most often a PLC. Protocol Modbus TCP/IP in the 5Y balances and C10 scales enables, among other things, the realization of mass readout, zeroing and tare functions of the device, as well as tare settings and MIN and MAX thresholds. * RFID ISO/IEC 14443 Type A, 13.56 MHz

This set is the perfect solution for laboratories and institutions requiring the highest precision.  (more)These cylindrical mass standards are made from the highest quality materials, ensuring excellent stability and resistance to environmental changes. Product Features: Highest class of accuracy: Class E1 is the highest standard of accuracy, making these standards ideal for calibrating precision measuring instruments. Cylindrical shape: The cylindrical shape of the standards ensures ease of handling and precise placement on weighing platforms. Wooden packaging: The standards are delivered in an elegant wooden box, which ensures their safe storage and transport. Set includes: 12 mass standards, 2 pairs of tweezers, 2 brushes and 1 pair of gloves. Applications: Calibration and verification of scales: Class E1 standards are ideal for calibrating and verifying precision analytical and laboratory scales. Metrological laboratories: The standards are indispensable in metrological laboratories where the highest measurement precision is required. Research andiIndustrial institutions: They are used in research and industrial institutions where maintaining the highest standards of accuracy is necessary. By choosing the E1 class mass standard set from RADWAG, you invest in reliability, precision, and durability, which translates to excellent quality in your laboratory work.