Hund H600 Transmitted Light Microscope

This Leica TCS SP 2 Confocal Microscope System was removed from a university lab due to a fault. The (more) university reported "Apparently it was a computer issue, in that the computer failed and would no longer talk to the confocal and nothing could be done to remedy the issue since Leica wont support it, I’m told the actual microscope and lasers are fine (if old!)" From our assessment, the microscope appears to be fully working and it could be split from the main system and used on its own. The controllers etc for the automated stage also appeared to work fine. It is just the AOBS head and control system that doesn't want to communicate with the PC. The system has been fully connected up at our facility. We have replaced the PCi card but that did not generate any success either. When starting the Leica PC program it shows the following message: "AOBS Crystal Ctrl (2)" reports 0 unlocked PLL channel(s)! Please lock channel(s) or reset controller. The AOBS is the scanner head which is attached to the main control desk. We have also tried the system with another identical head that we have in stock. That gave us exactly the same result. It is sold for spares/repairs. Please note that the marble table in the photos was retained by the lab.

Carl Zeiss Microscope 1058-431 Light Channel & 1095-490 Switching Mirror This item was removed f (more)rom a university lab where it was surplus to requirement. The item is in a reasonable, used cosmetic condition and has not been tested further as we are unable to at our facility. Includes:- - 1058-431 Light Detector - 1095-490 Switching Mirror

This item has just arrived in our stock. Please enquire for further details.

Ohaus a-AP50MM-B Photometer Fixed Wavelength 365 nm; 420 nm; 455 nm; 525 nm; 560 nm; 570 nm; 630 nm  (more)Photometric Measuring Range 0 Abs to 1 Abs Wavelength Accuracy ±1.0nm Features - The AP50MM is equipped with a real-time dynamic display for eachmeasurement, to provide fast, reliable results - Can record up to 30,000 datapointswith time and date stamp - Built-in calibration curves provide automatic selection of appropriatewavelengths from the long-lasting LED light source, store commonly used tests for efficiency - Large, backlit display makes it easier to read real-time results - Fixed wavelengths: 365 nm, 420 nm, 455 nm, 525 nm, 560 nm, 570 nm, 630 nm - Turbidity optical system based on nephelometric measurement - Photometric accuracy of ± 0.005 Abs at 1.0 Abs nominal - Compact and lightweight design weighing only 1.32 lb (0.6 kg) - Operates on 4 AA (LR6) batteries with a typical life of 6 months The Ohaus a-AP50MM-B Photometer is a standalone, multifunctional device designed for fast and reliable colorimetric and turbidity measurements in field applications. Engineered with a compact, rugged design, this photometer provides exceptional performance with a real-time dynamic display for each measurement, allowing for precise and efficient analysis. Capable of storing up to 30,000 data points with time and date stamps, it ensures seamless data management for professional use. The a-AP50MM-B features built-in calibration curves that automatically select the optimal wavelength from its advanced LED light source, including near-UV at 365 nm, making it highly versatile for various testing requirements. A large, backlit graphical LCD offers clear visibility of results, even in low-light conditions, while the device’s nephelometric turbidity optical system ensures accurate measurements ranging from 0 to 200 NTU. With its lightweight construction at just 1.32 lbs and operation powered by 4 AA batteries lasting up to six months, the a-AP50MM-B is perfect for on-the-go applications. While this model does not include additional accessories like the a-AP50MM-F, it delivers all the essential features for high-quality analysis, making it a reliable choice for water sample testing in diverse environments. INCLUDED: The Ohaus a-AP50MM-B Photometer includes: - >Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

MOTIC AE21 Inverted Phase Contrast Microscope with 4 Objectives Model: AE21 Series + MOTICAM 2000 ca (more)mera Trinocular Head Adjustable Eyepieces W10x/20 C-Mount Adapter 0.65x 4 Objectives (including 2 for phase contrast X10 and X20): E-Plan 4x/0.10 E-Plan PH 10x/0.25 LWD PH 20x/0.40 LWD 40x/0.60 Transmission illumination. With software and computer With Accessories Equipment tested and verified In good condition Power cord

Rigaku X-ray Diffractometer (XRD) Ultima III This system was removed from a university lab where it  (more)was surplus to requirements. The system is in reasonable used cosmetic condition. It has not been powered on at our site due to our on-site risk assessments surrounded X-Rays. Various components and parts are included as listed below, along with a PC setup, although no Rigaku software programs appear to be installed on the PC.However, there are the following software disks included: - Rigaku Basic Software (Cat No.: 9240J101) - Rigaku TTRAX3 and Ultima3 Software (Cat No.: 9240J101) - Rigaku Special Order Software (U30megaP) (Cat No.: 9999) System Specifications: - Model: Ultima III - Cat No.: 2035M410 - Serial No.: DD3654N - 6 Station Holder - Model: SA-HEM3 - Cat No.: 4057J101 - Serial No.: 00563702 - Patlite Beacon - Model: LMS-L (SN-06X03M) - Rigaku DC Motor Controller - SN: DD12866 - Rigaku Long Fine Focus - Type: R01-29-0202 - NC: 9430 022 73201 - No. DK 402688 - Rigaku CBO Cross Beam Optics - Cat No.: 2220B101 - SN: DD12793 - Additional Rigaku parts: - Cat No.: 5738E402 (SN-DD061813) - Cat No.: 2155G101 (SN-DD12804) - Cat No.: 4601K831 (SN-DD12154) - Cat No.: 4253A101 (SN-DD11586 - Vexta Stopping Motor - Model: PK543-A - SN: UR70J32307 PC Setup: - Dell Optiplex 9020 with monitor, keyboard, and mouse - The PC is in working order with all passwords cleared. It contains a few Rigaku files, but no software programs appear to be installed. Included Manuals/Software: - 2 x Rigaku D/MAX 2000/PC Series Instruction Manual - X-Ray Diffractometer Instruction Manual - Rigaku Basic Software (Cat No.: 9240J101) - Rigaku TTRAX3 and Ultima3 Software (Cat No.: 9240J101) - Rigaku Special Order Software (U30megaP) (Cat No.: 9999) Loose spare parts included: - Rigaku Cat No.: 2701E201 (SN-AD08851) - Container of round parts: Rigaku 900003 SH, w/Groove - 2 x Small containers with unknown parts - Scintag Generator Key - Key labeled: "Microscope" - Container of small metals, including: - 1 x Bag labeled "Silicon" - 1 x 640d Silicon Powder - 2 x Tubs UCAR Spectroscopic Powder - 1 x Tub labeled "Tung Flake" - Approximately 20 x small containers of Silicon metal

This item has just arrived in our stock. Please enquire for further details.

VACUUBRAND VACUU-Select, VSP 3000, and KF DN 16 Package for Fine Vacuum Control Upper Measuring Limi (more)t 750 torr Lower Measuring Limit 1 x 10-3 torr Accuracy +/- 15% of indicated value in the range 0.01-5 mbar/hPa/torr Features - Complete package for vacuum control of all fine vacuum applications in chemical labs, with continuous control range from 5 mbar to fine vacuum (10-3 mbar) - Graphic user interface for simple operation - Predefined applications for quick, reproducible results - Application editor allows easy customization - Proprietary Pirani-type fine vacuum gauge offers superior chemical resistance and mechanical robustness The VACUU·SELECT fine vacuum control packages provide an easy-to-use vacuum control option for work down to 10-3 mbar. These packages include the VACUU·SELECT controller with fine vacuum gauge, a chemical-resistant inline isolation valve (VV-B 15C), and the accessories required for connection to your vacuum system via small flange (KF) connections. VACUUBRAND offers fine vacuum control packages with two different small flange connections. The KF DN 16 fine vacuum control package is compatible with our rotary vane pump models RE / RZ 2.5 to RE / RZ 6 and our HYBRID pump RC 6. The KF DN 25 fine vacuum control package is configured for use with our RE / RZ 9 rotary vane pumps and VACUU·PURE screw pumps. With its intuitive, application-based user interface, the controller allows you to quickly get your fine vacuum process under control. For advanced processes, pre-defined applications can be modified, and new applications can be created to optimize your process conditions. The included inline solenoid valve and sensor are automatically configured via the proprietary VACUU·BUS system.INCLUDED: The VACUUBRAND VACUU-Select, VSP 3000, and KF DN 16 Package for Fine Vacuum Control includes: - Vacuum controller VACUU·SELECT (without internal vacuum sensor and venting valve) with VSP 3000 and power supply - Solenoid valve VV-B 15C KF DN 16 - T-piece KF DN 16 - Hose nozzle DN 10 mm (PP) - Clamping and sealing rings - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Scales indispensable in doctors’ offices, clinics and hospitals The baby scale is a precise el (more)ectronic weighing equipment manufactured in class III and intended to weighing infants. It is available as dual-range instrument. Baby scales are used in health care facilities such as doctors’ offices, clinics and hospitals. A matter of great weight Controlling an infant’s weight is very important, and failure to do so can have a negative impact on the child’s future life. Both too fast and too slow infant weight gain carry the risk of many diseases and health problems, including – on the one hand – childhood obesity, and on the other – motor or psychological disorders. Modern baby scales are much more accurate than they used to be – the readability of the best baby scales manufactured by RADWAG is 2 g. In addition, since a small child rarely lies still, the scale on which it is weighed should have electronic solutions and filters that allow precise measurement. Childishly simple weighing Weighing on a baby scale manufactured by RADWAG is child’s play. Why? First of all, today’s baby scales are light and mobile, allowing them to be carried anywhere. Other conveniences in them include: the ability to run on battery power for up to 8 hours, transfer data directly to a computer and tare, for example, when weighing with a diaper or sanitary pad. What’s more, the backlit display makes it readable from many angles. Also, the weighing pan, on which the infant is weighed, is properly contoured and tilted at the right angle for ergonomic and safe weight measurement. It has been with us for years, and will stay for a long time to come The baby scale is equipped with a SYNTHOS PS HI 945E polystyrene weighing pan as well as PUE C315 terminal comprising a backlit LCD display and a 5-button keyboard for simple operation of basic scale functions. The LCD display has accompanied us for long years. During this time it has proven its reliability. It guarantees the readability of the result from many angles and is energy efficient. Internal power No access to mains power? Power failure? No problem. Thanks to its internal rechargeable battery, the baby scale allows up to 8 hours of operation without mains power! Use the potential Receipt printers, power adapters, displays – thanks to multipurpose software, the baby scale can work with all of them. As standard, it is equipped with an RS232 cable to which you can connect most of the accessories from our range. Do you need ALIBI? There you have it. ALIBI memory is like a black box of a scale. It records all measurements taken on the device. The ALIBI memory cannot be modified or erased.

HX7 H scale’s multi functions Many functions, many interfaces and great robustness (IP66/ IP68 (more)) mean many possibilities for you to use this advanced scale. Tomorrow you can apply it to a different process than today – that’s the multifunctionality. That’s the saving! Use the potential Barcode scanners, receipt printers, label printers, external displays, control buttons, light signalling towers and other controlling/ signalling devices – thanks to multipurpose software, HX7 scale can work with all of them. You can easily connect them thanks to the fact that the balance is equipped with interfaces: RS232, RS485, USB, Ethernet, 4 IN/ 4 OUT. Optionally, the balance can be equipped with 12 IN/ 12 OUT and analog output module. You can find all accessories in our regular offer. And if you have questions about compatibility, our experts will help you. Easy and pleasant Simple and convenient operation with a 7-inch color display. Perfectly visible messages additionally supported by bargraph. The top part of the operation panel features a bar graph consisting of 9 red and green diode fields. The bar graph is a graphic visualisation informing the user on a current net weight of a product presented with reference to the scale range or declared min and max thresholds. The bracket allows the terminal to be placed on any flat horizontal surface or screwed to the wall with adjustable angle. The power of steel The use of stainless steel guarantees you a long life for the scale. It is not afraid of contact with moist objects or accidental splashes. The construction of the scale is made of a stainless steel. This guarantees you work for many years. Not just weighing But also parts counting, dosing, percent weighing and formulations. The power of HX7’s working mods. Do you need ALIBI? There you have it. ALIBI memory is like a black box of a scale. It records all measurements taken on the device. The ALIBI memory cannot be modified or erased. Referring to stored weighings you can generate weighing reports, formulation reports and reports on performed control processes. Single weighing is stored in the ALIBI memory as long as it is specified by a Weighing Storage Period (days) parameter.